journal article·2022-07

Synthesis and electrochemical performance of TiNb2O7 nanoparticles grown on electrochemically prepared graphene as anode materials for Li-ion batteries

Hamed Aghamohammadi, Reza Eslami-Farsani

Publisher page

Abstract

In this study, the electrochemically exfoliated graphene nanosheets are used as conductive networks to enhance the electrochemical performance of titanium niobium oxide (TNO) nanoparticles as anode for Li-ion batteries (LIBs). The morphological analyses show that without using graphene, the TNO porous microspheres are formed through the self-assembly mechanism. However, by adding different contents of graphene (1, 3, and 5 wt%), the TNO nanoparticles are distributed on the graphene nanosheets. The distribution of the TNO nanoparticles on graphene nanosheets decreases due to the increase in the number of the graphene layer. Accordingly, the effectiveness of graphene nanosheets in enhancing the electrochemical performance of TNO depends on their content. The TNO/3 wt% graphene has the best electrochemical performance among all samples. At 20C, the capacity value of pure TNO is improved by two orders via the addition of 3.0 wt% graphene nanosheets. The capacity retention of the pure TNO at 1C and after 200 cycles is improved by about 25% by the addition of 3.0 wt% graphene nanosheets due to the buffering effect of graphene. However, the higher contents of graphene nanosheets (5.0 wt%) not only cannot improve the properties of TNO but also reduce its capacity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Facile synthesis of LiMn0.75Fe0.25PO4/C nanocomposite cathode materials of lithium-ion batteries through microwave sintering
2. Electrochemical extraction of lithium from LiMn2O410.1016/0025-5408(84)90088-6 ↗
3. The elevated temperature performance of the LiMn2O4/C system: failure and solutions10.1016/S0013-4686(99)00209-1 ↗
4. Structure and performance of LiFePO4 cathode materials: a review10.1016/j.jpowsour.2010.11.113 ↗
5. Recent trends in the development of MXenes and MXene-based composites as anode materials for Li-ion batteries
6. Recent advances in the design of cathode materials for Li-ion batteries10.1039/D0RA03314F ↗
7. Review on challenges and recent advances in the electrochemical performance of high capacity Li‐and Mn‐rich cathode materials for Li‐ion batteries10.1002/aenm.201702397 ↗
8. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
9. Nanostructure Fe2O3 surface-coating on MnO2 microspheres as high rate performance anode materials for lithium-ion batteries10.1016/j.jallcom.2021.160113 ↗
10. Nanoneedle-assembled hollow α-Fe2O3 microflowers as Li-ion battery anode with high capacity and good temperature tolerance10.1016/j.jelechem.2021.115625 ↗
11. Confined pulverization promoting durable pseudocapacitance for FeOOH@PEDOT anode in Li-ion battery10.1016/j.jelechem.2021.115005 ↗
12. Recent advances in Co3O4 as anode materials for high-performance lithium-ion batteries
13. Co3O4@ graphene composites as anode materials for high-performance lithium ion batteries10.1021/ic1023086 ↗
14. Construction of the peanut-like Co3O4 as anode materials for high-performance lithium-ion batteries10.1007/s11581-019-03312-x ↗
15. Mueller · 2016 · 60
16. SnO2 nanoparticles with controlled carbon nanocoating as high-capacity anode materials for lithium-ion batteries10.1021/jp908244m ↗
17. Electrospun porous SnO2 nanotubes as high capacity anode materials for lithium ion batteries10.1016/j.elecom.2010.07.026 ↗
18. Zr-doped Li4Ti5O12 anode materials with high specific capacity for lithium-ion batteries10.1016/j.jallcom.2018.09.364 ↗
19. Hierarchical porous intercalation‐type V2O3 as high‐performance anode materials for Li‐ion batteries10.1002/chem.201700369 ↗
20. Intercalating Ti2Nb14O39 anode materials for fast‐charging, high‐capacity and safe lithium–ion batteries10.1002/smll.201702903 ↗
21. Hydrothermal synthesis of intertwining network structured TiO2 nanocomposite: a promising material for the effective monitoring of dopamine and anodic performance in lithium-ion battery10.1016/j.synthmet.2020.116403 ↗
22. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries10.1038/s41524-018-0064-0 ↗
23. The electrochemical mechanisms of solid–electrolyte interphase formation in lithium-based batteries10.1021/acs.jpcc.9b03886 ↗
24. Charge–discharge stability of graphite anodes for lithium-ion batteries10.1016/S0022-0728(00)00447-2 ↗
25. Advanced surface and microstructural characterization of natural graphite anodes for lithium ion batteries10.1016/j.carbon.2014.02.031 ↗
26. Investigation of the solid electrolyte interphase formation at graphite anodes in lithium-ion batteries with electrochemical impedance spectroscopy10.1016/j.electacta.2017.01.128 ↗
27. Hexagonal platelet graphite and its application in Li-ion batteries10.1016/j.carbon.2018.03.017 ↗
28. Wet‐chemistry synthesis of Li4Ti5O12 as anode materials rendering high‐rate Li‐ion storage10.1002/er.5020 ↗
29. Hydrothermal synthesis of Li4Ti5O12/C nanostructured composites: morphology and electrochemical performance10.1016/j.materresbull.2012.09.071 ↗
30. Hydrothermal synthesis of Li4Ti5O12 nanosheets as anode materials for lithium ion batteries10.1039/C5RA01351H ↗
31. Enhanced rate performance of Li4Ti5O12 anode material by ethanol-assisted hydrothermal synthesis for lithium-ion battery10.1016/j.ceramint.2014.02.077 ↗
32. Hierarchical macropore-mesoporous shell carbon dispersed with Li4Ti5O12 for excellent high rate sub-freezing Li-ion battery performance10.1016/j.carbon.2019.01.068 ↗
33. New anode framework for rechargeable lithium batteries10.1021/cm200441h ↗
34. 3-V full cell performance of anode framework TiNb2O7/spinel LiNi0. 5Mn1. 5O410.1021/cm201515g ↗
35. Investigation on Ti2Nb10O29 anode material for lithium-ion batteries10.1016/j.elecom.2012.09.015 ↗
36. A review study on titanium niobium oxide-based composite anodes for Li-ion batteries: synthesis, structure, and performance10.1016/j.ceramint.2021.06.127 ↗
37. High-energy, fast-charging, long-life lithium-ion batteries using TiNb2O7 anodes for automotive applications10.1016/j.jpowsour.2018.06.059 ↗
38. Characterization of mixed titanium–niobium oxide Ti2Nb10O29 annealed in vacuum as anode material for lithium-ion battery10.1016/j.jpowsour.2014.11.109 ↗
39. Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors10.1007/s42114-021-00358-2 ↗
40. Fabrication of organic shape-stabilized phase change material and its energy storage applications
41. Hybrid solid state supercapacitors (HSSC's) for high energy & power density: an overview
42. Biomass-derived nitrogen-doped porous carbons (NPC) and NPC/polyaniline composites as high performance supercapacitor materials
43. Wang · 2020
44. Low-strain titanium-based oxide electrodes for electrochemical energy storage devices: design, modification, and application10.1016/j.mtnano.2020.100085 ↗
45. Three‐dimensional porous TiNb2O7/CNT‐KB composite microspheres as lithium‐ion battery anode material10.1002/celc.201901024 ↗
46. Nano-TiNb2O7/carbon nanotubes composite anode for enhanced lithium-ion storage10.1016/j.electacta.2017.11.051 ↗
47. Porous Ti2 Nb 1 0 O 2 9− x microspheres wrapped by holey-reduced graphene oxide as superior anode material for high-rate performance lithium-ion storage10.1142/S1793292020500952 ↗
48. Solid-state synthesis of Ti2Nb10O29/reduced graphene oxide composites with enhanced lithium storage capability10.1016/j.jpowsour.2015.09.078 ↗
49. Electrochemical performance of TiNb2O7 nanoparticles anchored with different contents of MWCNTs as anode materials for Li-ion batteries10.1016/j.ceramint.2022.02.007 ↗
50. TiNb 2 O 7 nanoparticles assembled into hierarchical microspheres as high-rate capability and long-cycle-life anode materials for lithium ion batteries10.1039/C4NR04847D ↗
51. Porosity‐controlled TiNb2O7 microspheres with partial nitridation as a practical negative electrode for high‐power lithium‐ion batteries10.1002/aenm.201401945 ↗
52. Mesoporous TiNb2O7 microspheres as high performance anode materials for lithium-ion batteries with high-rate capability and long cycle-life10.1016/j.electacta.2017.10.138 ↗
53. Polydopamine-derived N-doped carbon-coated porous TiNb2O7 microspheres as anode materials with superior rate performance for lithium-ion batteries10.1016/j.electacta.2020.137623 ↗
54. Controlled synthesis of dual-phase carbon-coated Nb2O5/TiNb2O7 porous spheres and their Li-ion storage properties10.1016/j.jallcom.2017.10.051 ↗
55. Hierarchical porous TiNb2O7@ N-doped carbon microspheres as superior anode materials for lithium ion storage10.1016/j.ijhydene.2020.10.190 ↗
56. Defective Ti2Nb10O27.1: an advanced anode material for lithium-ion batteries10.1038/srep17836 ↗
57. Holey graphene for electrochemical energy storage10.1016/j.xcrp.2020.100215 ↗
58. Doping with W6+ ions enhances the performance of TiNb2O7 as an anode material for lithium-ion batteries10.1016/j.apsusc.2021.151517 ↗
59. A facile synthesis of Ag/TiO2/rGO nanocomposites with enhanced visible light photocatalytic activity
60. Metal-free graphene-based catalyst—insight into the catalytic activity: a short review10.1016/j.apcata.2014.11.041 ↗
61. Graphene-and CNTs-based carbocatalysts in persulfates activation: material design and catalytic mechanisms10.1016/j.cej.2018.08.049 ↗
62. An overview of oxygen reduction electrocatalysts for rechargeable zinc-air batteries enabled by carbon and carbon composites
63. Graphene-based materials for energy applications10.1557/mrs.2012.179 ↗
64. Graphene materials in green energy applications: recent development and future perspective10.1016/j.rser.2019.109656 ↗
65. Silica fume/capric acid-palmitic acid composite phase change material doped with CNTs for thermal energy storage10.1016/j.solmat.2017.12.036 ↗
66. Graphene-based electronic sensors10.1039/c2sc20205k ↗
67. Laser fabrication of graphene‐based flexible electronics10.1002/adma.201901981 ↗
68. A review of fabrication and applications of carbon nanotube film-based flexible electronics10.1039/c3nr33560g ↗
69. TiNb2O7/Graphene hybrid material as high performance anode for lithium-ion batteries10.1016/j.electacta.2015.06.122 ↗
70. TiNb2O7 microsphere anchored by polydopamine‐modified graphene oxide as a superior anode material in lithium‐ion batteries10.1002/er.5249 ↗
71. Boosting long-cycle-life energy storage with holey graphene supported TiNb2O7 network nanostructure for lithium ion hybrid supercapacitors10.1016/j.jpowsour.2018.09.050 ↗
72. Electrochemical synthesis of fluorinated graphene nanoplatelets in electrolytes containing hydrofluoric acid and TiO2 nanoparticles10.1016/j.flatc.2020.100172 ↗
73. Recent advances in one-pot functionalization of graphene using electrochemical exfoliation of graphite: a review study10.1016/j.synthmet.2020.116549 ↗
74. An experimental investigation on the synthesis of fluorographene by electrochemical method in the mixture of sulfuric and hydrofluoric acid electrolytes10.1016/j.ceramint.2020.06.308 ↗
75. Morphological/SAXS/WAXS studies on the electrochemical synthesis of graphene nanoplatelets10.1016/j.ceramint.2019.07.077 ↗
76. Facile synthesis of mesoporous TiNb2O7/C microspheres as long-life and high-power anodes for lithium-ion batteries10.1016/j.ijhydene.2020.02.214 ↗
77. Highly controllable transparent and conducting thin films using layer-by-layer assembly of oppositely charged reduced graphene oxides10.1039/C0JM02270E ↗
78. Synthesis and characterization of large-area graphene and graphite films on commercial Cu–Ni alloy foils10.1021/nl201699j ↗
79. Hierarchical Fe3O4 microsphere/reduced graphene oxide composites as a capable anode for lithium-ion batteries with remarkable cycling performance10.1016/j.jallcom.2016.02.214 ↗
80. Novel MXene-based hierarchically porous composite as superior electrodes for Li-ion storage10.1016/j.apsusc.2020.147214 ↗
81. Fe3O4@ Ti3C2 MXene hybrids with ultrahigh volumetric capacity as an anode material for lithium-ion batteries10.1039/C8TA00122G ↗
82. Diffusion mechanism of lithium ion through basal plane of layered graphene10.1021/ja301586m ↗
83. Unravelling the interface layer formation and gas evolution/suppression on a TiNb2O7 anode for lithium-ion batteries10.1021/acsami.8b08425 ↗
84. Electrochemical performances and gassing behavior of high surface area titanium niobium oxides10.1039/C6TA03813A ↗
85. High-rate lithium storage of TiNb2O7/reduced graphene oxide10.1016/j.ceramint.2020.08.235 ↗
86. TiNb2O7/graphene composites as high-rate anode materials for lithium/sodium ion batteries10.1039/C5TA10510B ↗