journal article·2022-03

Controls of oxygen-partial pressure to accelerate the electrochemical activation in Co-free Li-rich layered oxide cathodes

Xiaohui Wen, Chong Yin, Bao Qiu, Liyang Wan, Yuhuan Zhou, Zhining Wei, Zhepu Shi, Xing Huang, Qingwen Gu, Zhaoping Liu

Publisher page

Abstract

The degree of electrochemical activation of Li 2MnO 3 component has a vital role in achieving high capacity in Co-free Li-rich layered cathodes. However, due to the segregation of Li 2MnO 3 component in these cathodes sintering at high temperature, it is difficult to be fully activated. Herein, a strategy is proposed to alleviate segregation of Li 2MnO 3 component by reducing the oxidation state of partial Mn with tailoring oxygen partial pressure during heat treatment. Combined with X-ray photoelectron spectroscopy, electron energy loss spectrum and soft X-ray absorption spectroscopy, some slight Mn 3+ have been confirmed to be introduced into the bulk lattice. Monte Carlo simulation is applied to identify the Mn 3+ positive effect on alleviating LiMn 6 segregation. As a result, the material sintered in the O 2-deficient environment exhibits an accelerated activation of Li 2MnO 3 component at the pre-cycles and delivers a high capacity over 250 mAh g −1 with the capacity retention about 92% over 100 cycle. This strategy provides a simple but effective method to exploit the electrochemical activity in Co-free Li-rich layered oxides.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Sustainability and in situ monitoring in battery development10.1038/nmat4777 ↗
2. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
3. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗
4. Visualizing nanoscale 3D compositional fluctuation of lithium in advanced lithium-ion battery cathodes10.1038/ncomms9014 ↗
5. Electrochemical activities in Li2MnO310.1149/1.3110803 ↗
6. Capacity-controllable Li-rich cathode materials for lithium-ion batteries10.1016/j.nanoen.2014.03.013 ↗
7. Understanding the stepwise capacity increase of high energy low-Co Li-rich cathode materials for lithium ion batteries10.1039/C4TA03692A ↗
8. Understanding the origin of Li2MnO3 activation in Li-rich cathode materials for lithium-ion batteries10.1002/adfm.201503276 ↗
9. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
10. Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides10.1038/s41467-017-02041-x ↗
11. O2-Type Li0.78[Li0.24Mn0.76]O2 nanowires for high-performance lithium-ion battery cathode10.1021/acs.nanolett.0c01640 ↗
12. A high-performance Li-Mn-O Li-rich cathode material with rhombohedral symmetry via intralayer Li/Mn disordering10.1002/adma.202000190 ↗
13. Elucidating the effect of iron doping on the electrochemical performance of cobalt-free lithium-rich layered cathode materials10.1002/aenm.201902445 ↗
14. Improved cycling stability and fast charge-discharge performance of cobalt-free lithium-rich oxides by magnesium-doping10.1021/acsami.6b11724 ↗
15. A cobalt-free Li(Li0.16Ni0.19Fe0.18Mn0.46)O2 cathode for lithium-ion batteries with anionic redox reactions10.1002/cssc.201802436 ↗
16. Stabilized Co-free Li-rich oxide cathode particles with an artificial surface prereconstruction10.1002/aenm.202001120 ↗
17. An ultra-long-life lithium-rich Li1.2Mn0.6Ni0.2O2 cathode by three-in-one surface modification for lithium-ion batteries10.1002/anie.202000628 ↗
18. Multistage Li1.2Ni0.2Mn0.6O2 micro-architecture towards high-performance cathode materials for lithium-ion batteries10.1002/celc.201700727 ↗
19. Hierarchical Li1.2Ni0.2Mn0.6O2 nanoplates with exposed {010} planes as high-performance cathode material for lithium-ion batteries10.1002/adma.201402541 ↗
20. Tuning primary particle growth of Li1.2Ni0.2Mn0.6O2 by Nd-modification for improving the electrochemical performance of lithium ion batteries10.1021/acssuschemeng.8b06005 ↗
21. Surface modification of Li-rich Mn-based layered oxide cathodes: challenges, materials, methods, and characterization10.1002/aenm.202002506 ↗
22. Role of cobalt content in improving the low-temperature performance of layered lithium-rich cathode materials for lithium-ion batteries10.1021/acsami.5b04514 ↗
23. The principles determining the structure of complex ionic crystals10.1021/ja01379a006 ↗
24. Gibbs energy of formation of MnO: measurement and assessment10.1007/s11669-008-9280-5 ↗
25. Thermodynamic data for Mn3O4, Mn2O3 and MnO210.1515/htmp.2011.069 ↗
26. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
27. Understanding the discrepancy of defect kinetics on anionic redox in lithium-rich cathode oxides10.1021/acsami.8b21201 ↗
28. formation of layered-layered composites in the Li-Co-Mn oxide pseudoternary system during slow cooling10.1021/cm304002b ↗
29. The role of metal site vacancies in promoting Li-Mn-Ni-O layered solid solutions10.1021/cm401461m ↗
30. Equation of state calculations by fast computing machines10.1063/1.1699114 ↗
31. Determination of the kinetic parameters of mixed‐conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
32. Lithium diffusion study in Li2MnO3 and Li1.17Ni0.17Mn0.67O2: a combined experimental and computational approach10.1039/C7CP06458F ↗
33. Electron-energy-loss core-edge structures in manganese oxides10.1103/PhysRevB.48.2102 ↗
34. Direct quantification of anionic redox over long cycling of Li-rich NMC via hard X-ray photoemission spectroscopy10.1021/acsenergylett.8b01798 ↗
35. Faster activation and slower capacity/voltage fading: a bifunctional urea treatment on lithium-rich cathode materials10.1002/adfm.201909192 ↗
36. Polarizability, optical basicity and O 1s binding energy of simple oxides10.2109/jcersj.107.21 ↗
37. Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment10.1038/s41560-019-0508-x ↗
38. Direct spectroscopy for probing the critical role of partial covalency in oxygen reduction reaction for cobalt-manganese spinel oxides10.3390/nano9040577 ↗
39. Spectroscopic fingerprints of valence and spin states in manganese oxides and fluorides10.1016/j.cap.2012.09.017 ↗
40. Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries10.1038/381499a0 ↗
41. Synthesis and electrochemical studies of LiMnO2 prepared at low temperatures10.1149/1.2221101 ↗
42. New insight into Ni-rich layered structure for next-generation Li rechargeable batteries10.1002/aenm.201701788 ↗
43. Understanding the enhanced kinetics of gradient-chemical-doped lithium-rich cathode material10.1021/acsami.7b02944 ↗
44. In-situ neutron diffraction study of the xLi2MnO3·(1−x)·LiMO2 (x=0, 0.5; M=Ni, Mn, Co) layered oxide compounds during electrochemical cycling10.1016/j.jpowsour.2013.04.149 ↗
45. Role of superexchange interaction on tuning of Ni/Li disordering in layered Li(NixMnyCoz)O210.1021/acs.jpclett.7b02498 ↗
46. Cobalt in lithium-ion batteries10.1126/science.aba9168 ↗
47. New insight into Li/Ni disorder in layered cathode materials for lithium ion batteries: a joint study of neutron diffraction, electrochemical kinetic analysis and first-principles calculations10.1039/C6TA08448F ↗
48. Metastability and reversibility of anionic redox-based cathode for high-energy rechargeable batteries10.1016/j.xcrp.2020.100028 ↗
49. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
50. Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release10.1038/s41560-018-0207-z ↗