Nickel fluoride (NiF2)/porous carbon nanocomposite synthesized via ammonium fluoride (NH4F) treatment for lithium-ion battery cathode applications
Source abstract
Abstract
Metal fluoride cathode materials, which are cost-effective and have large theoretical capacities, can be used in lithium-ion batteries (LIBs) to reduce the cost of these batteries. However, they have intrinsically low electrical conductivity and high overpotential. Herein, we report a bottom-up approach to synthesize NiF 2/porous carbon (NPC) nanocomposites using an ammonium fluoride (NH 4 F) treatment. In this process the nickel precursor in the porous carbon is fluorinated under the solventless condition without hazardous reagents; thus, lower toxicity and higher yield compared to those of traditional methods can be achieved. Furthermore, we demonstrate the formation mechanism of NiF 2 according to the reaction temperature. As a cathode material for LIBs, NPC nanocomposites exhibit an outstanding initial reversible capacity of 830 mAh g −1 at a current density of 50 mA g −1 and excellent rate performance of 487 mAh g −1 at a high current density of 1000 mA g −1. These capacities are much larger than those of the intercalation-based cathodes. The successful preparation of NPC nanocomposites may facilitate the use of metal fluorides as LIB cathode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Fluorides and Related Compounds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
2. Nanostructured high-energy cathode materials for advanced lithium batteries10.1038/nmat3435 ↗
3. Thermally modulated lithium iron phosphate batteries for mass-market electric vehicles10.1038/s41560-020-00757-7 ↗
4. Structural origin of the high-voltage instability of lithium cobalt oxide10.1038/s41565-021-00855-x ↗
5. Layered lithium cobalt oxide cathodes
6. Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes10.1038/s41563-019-0572-4 ↗
7. A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent10.1038/s41560-021-00839-0 ↗
8. Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries10.1038/s41560-021-00782-0 ↗
9. Increasing poly(ethylene oxide) stability to 4.5 V by surface coating of the cathode10.1021/acsenergylett.9b02739 ↗
10. Toward a high-voltage fast-charging pouch cell with TiO2 cathode coating and enhanced battery safety10.1016/j.nanoen.2020.104643 ↗
11. Revisiting metal fluorides as lithium-ion battery cathodes10.1038/s41563-020-00893-1 ↗
12. Synthesis of sodium cobalt fluoride/reduced graphene oxide (NaCoF3/rGO) nanocomposites and investigation of their electrochemical properties as cathodes for Li-ion batteries10.3390/ma14030547 ↗
13. Halide-based materials and chemistry for rechargeable batteries10.1002/anie.201902842 ↗
14. Conversion reaction mechanisms in lithium ion batteries: study of the binary metal fluoride electrodes10.1021/ja206268a ↗
15. A review on the application of iron(III) fluorides as positive electrodes for secondary cells, mater10.1007/s40243-014-0037-2 ↗
16. Nano-CoF3 prepared by direct fluorination with F2 gas: application as electrode material in Li-ion battery10.1016/j.jfluchem.2016.10.003 ↗
17. Novel synthesis of anhydrous and hydroxylated CuF2 nanoparticles and their potential for lithium ion batteries10.1002/chem.201800207 ↗
18. Electrode degradation in lithium-ion batteries10.1021/acsnano.9b04365 ↗
19. Synthesis of FeF2/carbon composite nanoparticle by one-pot solid state reaction as cathode material for lithium-ion battery10.1016/j.jmrt.2017.05.013 ↗
20. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
21. Band-gap engineering of FeF3·0.33H2O nanosphere via Ni doping as a high-performance lithium-ion battery cathode10.1021/acssuschemeng.0c05258 ↗
22. Understanding the combined effects of microcrystal growth and band gap reduction for Fe(1−x)TixF3 nanocomposites as cathode materials for lithium-ion batteries10.1016/j.nanoen.2015.08.006 ↗
23. Enhancing the lithium storage capacity of FeF3 cathode material by introducing C@LiF additive10.1016/j.jelechem.2018.01.002 ↗
24. Origins of large voltage hysteresis in high-energy-density metal fluoride lithium-ion battery conversion electrodes10.1021/jacs.6b00061 ↗
25. Tracking the confinement effect of highly dispersive carbon in a tungsten oxide/carbon nanocomposite: conversion anode materials in lithium ion batteries10.1039/C7TA07979F ↗
26. Continuous-flow synthesis of carbon-coated silicon/iron silicide secondary particles for Li-ion batteries10.1021/acsnano.9b07473 ↗
27. Carbon-metal fluoride nanocomposites10.1149/1.1596162 ↗
28. FeOF/TiO2 hetero-nanostructures for high-areal-capacity fluoride cathodes10.1021/acsami.0c09185 ↗
29. CuF2 as reversible cathode for fluoride ion batteries10.1002/adfm.201701051 ↗
30. Worm-like mesoporous structured iron-based fluoride: facile preparation and application as cathodes for rechargeable lithium ion batteries10.1016/j.jpowsour.2013.01.035 ↗
31. Low-temperature ionic-liquid-based synthesis of nanostructured iron-based fluoride cathodes for lithium batteries10.1002/adma.201000535 ↗
32. A high-capacity cathode for lithium batteries consisting of porous microspheres of highly amorphized iron fluoride densified from its open parent phase10.1002/aenm.201200209 ↗
33. Synthesis of metal-fluoride nanoparticles supported on thermally reduced graphite oxide10.3762/bjnano.8.247 ↗
34. Excellent cycle performance of Co-doped FeF3/C nanocomposite cathode material for lithium-ion batteries10.1039/c2jm32936k ↗
35. Fabrication of FeF3 nanoflowers on CNT branches and their application to high power lithium rechargeable batteries10.1002/adma.201002879 ↗
36. Iron fluoride hollow porous microspheres: facile solution-phase synthesis and their application for Li-ion battery cathodes10.1002/chem.201304713 ↗
37. A cathode material for lithium-ion batteries based on graphitized carbon-wrapped FeF3 nanoparticles prepared by facile polymerization10.1039/C6TA06696H ↗
38. Lithium–iron (III) fluoride battery with double surface protection10.1002/aenm.201800721 ↗
39. A new cathode material of NiF2 for thermal batteries with high specific power10.1016/j.electacta.2020.137051 ↗
40. Conversion mechanism of nickel fluoride and NiO-doped nickel fluoride in Li ion batteries10.1016/j.electacta.2011.10.105 ↗
41. Cu-substituted NiF2 as a cathode material for Li-ion batteries10.1021/acsami.8b15791 ↗
42. Fading mechanisms and voltage hysteresis in FeF2–NiF2 solid solution cathodes for lithium and lithium-ion batteries10.1002/smll.201804670 ↗
43. Fabrication of novel mesocellular carbon foams with uniform ultralarge mesopores10.1021/ja015510n ↗
44. XRD analysis of carbon stacking structure in coal during heat treatment10.1016/j.fuel.2004.06.019 ↗
45. Structure of carbon materials explored by local transmission electron microscopy and global powder diffraction probes
46. MoO2 nanocrystals interconnected on mesocellular carbon foam as a powerful catalyst for vanadium redox flow battery10.1039/C5RA24626A ↗
47. Carbon-coated LiFePO4–porous carbon composites as cathode materials for lithium ion batteries10.1039/c2nr33183g ↗
48. A three-dimensional interlayer composed of graphene and porous carbon for long-life, high capacity lithium-iron fluoride battery10.1016/j.electacta.2016.10.076 ↗
49. Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials10.1039/C4CS00071D ↗
50. Multilayered silicon embedded porous carbon/graphene hybrid film as a high performance anode10.1016/j.carbon.2014.12.036 ↗
51. Hollow silica spheres embedded in a porous carbon matrix and its superior performance as the anode for lithium-ion batteries10.1002/ppsc.201500218 ↗
52. Residual silica removal and nanopore generation on industrial waste silicon using ammonium fluoride and its application to lithium-ion battery anodes10.1016/j.cej.2021.129389 ↗
53. Ammonium fluoride mediated synthesis of anhydrous metal fluoride–mesoporous carbon nanocomposites for high-performance lithium ion battery cathodes10.1021/acsami.6b10641 ↗
54. CoF2 nanoparticles grown on carbon fiber cloth as conversion reaction cathode for lithium-ion batteries10.1016/j.jallcom.2019.07.034 ↗
55. Investigation of the conversion mechanism of nanosized CoF210.1016/j.electacta.2013.05.107 ↗
56. High-capacity lithium-ion battery conversion cathodes based on iron fluoride nanowires and insights into the conversion mechanism10.1021/nl303630p ↗
57. Carbon metal fluoride nanocomposites10.1149/1.1602454 ↗
58. Investigation of the lithiation and delithiation conversion mechanisms of bismuth fluoride nanocomposites10.1149/1.2167951 ↗
59. Conversion cathodes for rechargeable lithium and lithium-ion batteries10.1039/C6EE02326F ↗
60. Electrochemical impedance spectroscopic study of the electronic and ionic transport properties of NiF2/C composites10.1016/S1452-3981(23)18260-5 ↗
61. Understanding improved electrochemical properties of NiO-doped NiF2–C composite conversion materials by X-ray absorption spectroscopy and pair distribution function analysis10.1039/c3cp54431a ↗
62. The electrochemical performance and mechanism of cobalt (II) fluoride as anode material for lithium and sodium ion batteries10.1016/j.electacta.2015.04.029 ↗
63. Enhanced interfacial lithium storage in nanocomposites of transition metals with LiF and Li2O: comparison of DFT calculations and experimental studies
64. Li-storage via heterogeneous reaction in selected binary metal fluorides and oxides10.1149/1.1801451 ↗
65. Metal–organic framework-derived nanoconfinements of CoF2 and mixed-conducting wiring for high-performance metal fluoride-lithium battery10.1021/acsnano.0c08918 ↗
66. Intercalation of PF6− anion into graphitic carbon with nano pore for dual carbon cell with high capacity10.1016/j.jpowsour.2010.11.075 ↗
67. Investigation of PF6− and TFSI− anion intercalation into graphitized carbon blacks and its influence on high voltage lithium ion batteries10.1039/C4CP04113E ↗
68. Electrochemical activity of carbon blacks in LiPF6- based organic electrolytes10.1016/j.jpowsour.2013.07.033 ↗
69. Solvated Li-ion transfer at interface between graphite and electrolyte
70. One-pot synthesis of FeF3/graphene composite for sodium secondary batteries10.1016/j.matlet.2015.05.041 ↗
71. Improved electrochemical performance of FeF3 by inlaying in a nitrogen-doped carbon matrix10.1002/celc.201901060 ↗
72. High-performance cathode material of FeF3·0.33H2O modified with carbon nanotubes and graphene for lithium-ion batteries10.1186/s11671-019-2925-y ↗
73. Significantly improved cyclability of conversion-type transition metal oxyfluoride cathodes by homologous passivation layer reconstruction10.1002/aenm.201903333 ↗
74. Insights into the effects of electrolyte composition on the performance and stability of FeF2 conversion-type cathodes10.1002/aenm.201803323 ↗
75. Improved performance in FeF2 conversion cathodes through use of a conductive 3D scaffold and Al2O3 ALD coating10.1002/adfm.201702783 ↗
76. Metal fluorides nanoconfined in carbon nanopores as reversible high capacity cathodes for Li and Li-ion rechargeable batteries: FeF2 as an example10.1002/aenm.201401148 ↗
77. Carbon nanotube–CoF2 multifunctional cathode for lithium ion batteries: effect of electrolyte on cycle stability10.1002/smll.201501139 ↗