journal article·2021-12

Surface oxygen vacancy engineering and physical protection by in-situ carbon coating process of lithium rich layered oxide

Vasu Shanmugam, Sasikala Natarajan, Laurel Simon Lobo, Ankita Mathur, Moodakare B. Sahana, G. Sundararajan, R. Gopalan

Publisher page

Abstract

Abstract Lithium-rich layered oxide (LLO) with a large specific capacity (>250 mAhg−1) and the wider voltage window (2.0–4.8 V) delivers an energy density of about 1000 Wh/kg. However, oxygen release from the surface of LLO and decomposition of electrolyte solvents leads to increased electrode-electrolyte interface resistance. To achieve the maximum energy density of LLO, it becomes mandatory to protect the surface structure and simultaneously activate the cationic and anionic redox reaction. Here, we demonstrate a novel in-situ carbon encapsulation on Li1.15Ni0.23Co0.08Mn0.54O2 by the industrially viable co-precipitation process followed by solid-state reaction. Effect of carbon encapsulation on structure formation, chemical composition, and elemental oxidation states of Li1.15Ni0.23Co0.08Mn0.54O2 are analyzed by the techniques such as X-ray diffraction, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The enhanced electrochemical performance is confirmed by increased coulombic efficiency, reduced interfacial resistance, and suppressed voltage fading. Moreover, carbon-coated LLO retains an excellent capacity of 94% after 300 cycles at 2C rate cycling, while the pristine LLO retained only 77.8% of capacity. Further, electrochemical cycling of carbon encapsulated LLO with pre-lithiated graphite delivers an energy density of 500 Wh/kg after 100 cycles at 0.5C rate (150 mAg−1).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. High-voltage positive electrode materials for lithium-ion batteries10.1039/C6CS00875E ↗
2. “3. Li-Rich Layered Oxides and Their Practical Challenges Recent Progress and Perpectives.Pdf.” .
3. Stabilizing the cationic/anionic redox chemistry of Li-rich layered cathodes by tuning the upper cut-off voltage for high energy-density lithium-ion batteries10.1039/D0TA05429A ↗
4. Probing the initiation of voltage decay in Li-rich layered cathode materials at the atomic scale10.1039/C4TA06856D ↗
5. Direct In situ observation of Li 2 O evolution on Li-rich high-capacity cathode material, Li[Ni x Li (1–2 x )/3 Mn (2– x )/3 ]O 2 (0 ≤ x ≤0.5)10.1021/ja410137s ↗
6. Review on challenges and recent advances in the electrochemical performance of high capacity Li- and Mn-rich cathode materials for Li-ion batteries10.1002/aenm.201702397 ↗
7. Nanoscale surface modification of Li-rich layered oxides for high-capacity cathodes in Li-ion batteries10.1007/s11051-018-4165-y ↗
8. Al 2 O 3 -coated Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 nanotubes as cathode materials for high-performance lithium-ion batteries10.1039/C8RA09428D ↗
9. Enhanced electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2 cathode with an ionic conductive LiVO3 coating layer10.1021/acssuschemeng.5b01083 ↗
10. Nanolaminated ZnO–TiO2 coated lithium-rich layered oxide cathodes by atomic layer deposition for enhanced electrochemical performances10.1016/j.jallcom.2020.155845 ↗
11. The effect of MgO coating on Li1.17Mn0.48Ni 0.23Co0.12O2 cathode material for lithium ion batteries10.1016/j.ssi.2013.12.018 ↗
12. Long-life nickel-rich layered oxide cathodes with a uniform Li2ZrO3 surface coating for lithium-ion batteries10.1021/acsami.7b00070 ↗
13. Influence of vanadium compound coating on lithium-rich layered oxide cathode for lithium-ion batteries10.1039/C4RA10097B ↗
14. Effect of Li3PO4 coating of layered lithium-rich oxide on electrochemical performance10.1016/j.jpowsour.2016.11.020 ↗
15. Multifunctional ALPO4 coating for improving electrochemical properties of low-cost Li[Li0.2Fe0.1Ni0.15Mn0.55]O2 cathode materials for lithium-ion batteries10.1021/am508579r ↗
16. Effect of Co3(PO4)2 coating on Li[Co0.1Ni0.15Li0.2Mn0.55]O 2 cathode material for lithium rechargeable batteries10.1016/j.jpowsour.2008.05.091 ↗
17. Coating effect of LiFePO4 and Al2O3 on Li1.2Mn0.54Ni0.13Co0.13O2 cathode surface for lithium ion batteries10.1016/j.jpowsour.2017.04.008 ↗
18. Influences of FeF3 coating layer on the electrochemical properties of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials for lithium-ion batteries10.1016/j.ssi.2016.04.024 ↗
19. In situ formed LiNi0.8Co0.1Mn0.1O2@LiF composite cathode material with high rate capability and long cycling stability for lithium-ion batteries10.1007/s11581-019-03353-2 ↗
20. Functioning mechanism of AlF3 coating on the Li- and Mn-rich cathode materials10.1021/cm502071h ↗
21. Bifunctional effects of carbon coating on high-capacity Li1.2Ni0.13Co0.13Mn0.54O2 cathode for lithium-ion batteries10.1007/s10008-014-2707-5 ↗
22. Synchronous phase transition and carbon coating on the surface of Li-rich layered oxide cathode materials for rechargeable Li-ion batteries10.1016/j.jpowsour.2018.10.001 ↗
23. Mn · “Electrochemistry Communications,” ELECOM · 2010 · 12 · 75010.1016/j.elecom.2010.03.024 ↗
24. Manuscript · Mater. Chem. · 2014
25. Paper · 2014
26. Lu · 2019
27. Park · 2018 · 1
28. Use of carbon coating material for enhanced performances of lithium - ion batteries
29. In-situ carbon encapsulation of LiNi1/3Co1/3Mn1/3O2 using pillared ethylene glycol trapped in the metal hydroxide interlayers for enhanced cyclic stability10.1016/j.electacta.2017.08.096 ↗
30. S. Amzil et al., “{010} oriented Li1.2Mn0.54Co0.13Ni0.13O2@C nanoplate with high initial columbic efficiency,” J. Power Sources, vol. 486. 2021, doi: 10.1016/j.jpowsour.2020.229372.10.1016/j.jpowsour.2020.229372 ↗
31. Recent advances in prelithiation materials and approaches for lithium-ion batteries and capacitors10.1016/j.ensm.2020.07.009 ↗
32. Lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 oxide coated by Li3PO4 and carbon nanocomposite layers as high performance cathode materials for lithium ion batteries10.1039/C4TA04823G ↗
33. Understanding the rate capability of high-energy-density Li-rich layered Li1.2Ni0.15Co0.1Mn0.55O2 cathode materials10.1002/aenm.201300950 ↗
34. Elucidating anionic oxygen activity in lithium-rich layered oxides
35. Remarkably improved electrochemical performance of Li- and Mn-rich cathodes upon substitution of Mn with Ni10.1021/acsami.6b07959 ↗
36. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
37. Integrated Materials xLi[sub 2]MnO[sub 3]⋅(1−x)LiMn[sub 1/3]Ni[sub 1/3]Co[sub 1/3]O[sub 2] (x=0.3, 0.5, 0.7) Synthesized10.1149/1.3463782 ↗
38. Mitigating the surface degradation and voltage decay of Li1.2Ni0.13Mn0.54Co0.13O2 cathode material through surface modification using Li2ZrO310.1021/acsomega.7b00381 ↗
39. Improved capacity and stability of integrated Li and Mn rich layered-spinel Li1.17Ni0.25Mn1.08O3 cathodes for Li-ion batteries10.1039/C5TA02233A ↗
40. An appropriate amount of new spinel phase induced by control synthesis for the improvement of electrochemical performance of Li-rich layered oxide cathode material10.1016/j.electacta.2019.135240 ↗
41. Raman microscopy of lithium-manganese-rich transition metal oxide cathodes10.1149/2.0361501jes ↗
42. High-discharge-voltage lithium-rich layered-oxide cathode materials based on low oxygen vacancy10.1039/C9DT00193J ↗
43. The effect of oxygen vacancy and spinel phase integration on both anionic and cationic redox in Li-rich cathode materials10.1039/D0TA02517H ↗
44. The effects of Fe-doping on MnO2: phase transitions, defect structures and its influence on electrical properties10.1039/D0RA10376D ↗
45. Synthesis and characterization of α-MnO2 nanoneedles for electrochemical supercapacitors10.1016/j.electacta.2017.12.118 ↗
46. An appropriate amount of new spinel phase induced by control synthesis for the improvement of electrochemical performance of Li-rich layered oxide cathode material10.1016/j.electacta.2019.135240 ↗
47. Smart design of lithium-rich layered oxide cathode compositions with suppressed voltage decay10.1039/c3ta14975g ↗
48. Unraveling the voltage-fade mechanism in high-energy-density lithium-ion batteries: origin of the tetrahedral cations for spinel conversion10.1021/cm5031415 ↗
49. Editors' choice—practical assessment of anionic redox in Li-rich layered oxide cathodes: a mixed blessing for high energy Li-ion batteries10.1149/2.0531614jes ↗
50. Direct quantification of anionic redox over long cycling of Li-rich NMC via hard X-ray photoemission spectroscopy10.1021/acsenergylett.8b01798 ↗
51. Study of cathode materials for lithium-ion batteries: recent progress and new challenges10.3390/inorganics5020032 ↗
52. Critical role of oxygen evolved from layered Li-Excess metal oxides in lithium rechargeable batteries10.1021/cm3005634 ↗
53. Fundamental interplay between anionic/cationic redox governing the kinetics and thermodynamics of lithium-rich cathodes10.1038/s41467-017-02291-9 ↗
54. Electrochemical modeling and performance of a lithium- and manganese-rich layered transition-metal oxide positive electrode10.1149/2.0231504jes ↗
55. Yu · 2013_LLO Battry_Review. · 2013
56. Electrochimica Acta Revealing the fake initial coulombic ef fi ciency of spinel/layered Li-rich cathode materials10.1016/j.electacta.2020.136279 ↗
57. Is cobalt needed in Ni-rich positive electrode materials for lithium ion batteries?10.1149/2.1381902jes ↗
58. Engineering oxygen vacancies in hierarchically Li-rich layered oxide porous microspheres for high-rate lithium ion battery cathode10.1007/s40843-019-9456-1 ↗
59. Journal of Materials Science & Technology Surface modification with oxygen vacancy in Li-rich layered oxide10.1016/j.jmst.2018.12.021 ↗