journal article·2021-09Open access

Development of high performing polymer electrolytes based on superconcentrated solutions

Diana Elena Ciurduc, Nicola Boaretto, Juan P. Fernández-Blázquez, Rebeca Marcilla

Abstract

In this work, we investigate gel-polymer electrolytes (GPEs) made of porous PVDF-HFP swollen by concentrated solutions of LiTFSI salt in DMC:FEC mixtures. The porous nature of the polymer matrix allows achieving high values of electrolyte uptake while keeping adequate mechanical stability. As a result, the ionic conductivity values of the different gels were high, ranging between 10−5 and 10−4 S cm−1 at room temperature with the highest value (0.19 mS cm−1) being obtained for the superconcentrated gel electrolyte named GPE-211 having a molar ratio composition of 2:1:1 (DMC:FEC:LiTFSI). The lithium transference numbers (t+) were also found to be high, higher than 0.4 in some cases. Moreover, the electrochemical stability window of these gels exceed 5V in all cases, and aluminium corrosion was hindered. Stability tests were carried out for optimized gel electrolyte (GPE-211), showing that plating/stripping in symmetrical Li/Li cells is stable for more than 300 h, whereas coulombic efficiency in Li/Cu cells reaches over 80%. Finally, Li/GPE-211/LFP and Li/GPE-211/NMC batteries were assembled and tested, obtaining high capacity values (147 mAh g−1 and 160mAh g−1 at 0.1 mA cm−2) and good rate capability at room temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Tarascon
2. The success story of graphite as a lithium-ion anode material-fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
3. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
4. Bending-tolerant anodes for lithium-metal batteries
5. Novel cross-linked copolymer gel electrolyte supported by hydrophilic polytetrafluoroethylene for rechargeable lithium batteries10.1016/j.memsci.2013.08.029 ↗
6. Cross-linking network based on Poly(ethylene oxide): solid polymer electrolyte for room temperature lithium battery10.1016/j.jpowsour.2019.02.090 ↗
7. All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production10.1016/j.jpowsour.2018.02.062 ↗
8. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries10.1073/pnas.1712895115 ↗
9. Preparation and electrochemical characterization of gel polymer electrolyte based on electrospun polyacrylonitrile nonwoven membranes for lithium batteries10.1016/j.jpowsour.2010.10.089 ↗
10. Composite gel polymer electrolyte with ceramic particles for LiNi1/3Mn1/3Co1/3O2-Li4Ti5O12 lithium ion batteries10.1016/j.electacta.2017.03.176 ↗
11. Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion battery10.1039/C2EE23564A ↗
12. Cross-linked composite gel polymer electrolyte using mesoporous methacrylate-functionalized SiO2 nanoparticles for lithium-ion polymer batteries10.1038/srep26332 ↗
13. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
14. Double-layer polymer electrolyte for high-voltage all-solid-state rechargeable batteries
15. Ternary polymer electrolytes containing pyrrolidinium-based polymeric ionic liquids for lithium batteries10.1016/j.jpowsour.2009.11.146 ↗
16. Development of safe, green and high performance ionic liquids-based batteries (ILLIBATT project)10.1016/j.jpowsour.2011.07.058 ↗
17. Development of electrolytes towards achieving safe and high-performance energy-storage devices: a review10.1002/celc.201402277 ↗
18. A novel non-woven fabric supported gel polymer electrolyte based on poly ( methylmethacrylate-polyhedral oligomeric silsesquioxane ) by phase inversion method for lithium ion batteries10.1016/j.memsci.2018.07.014 ↗
19. Cross-linked poly(vinylidene fluoride-cohexafluoropropene) (PVDF-co-HFP) gel polymer electrolyte for flexible li-ion battery integrated with organic light emitting diode (OLED)10.3390/ma11040543 ↗
20. PVDF-based porous polymer electrolytes for lithium batteries10.1016/S0167-2738(02)00335-1 ↗
21. A superior composite gel polymer electrolyte of Li7La3Zr2O12- poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for rechargeable solid-state lithium ion batteries10.1016/j.materresbull.2018.02.051 ↗
22. Research progress towards understanding the unique interfaces between concentrated electrolytes and electrodes for energy storage applications10.1002/advs.201700032 ↗
23. Advances and issues in developing salt-concentrated battery electrolytes10.1038/s41560-019-0336-z ↗
24. Concentrated electrolytes: decrypting electrolyte properties and reassessing Al corrosion mechanisms10.1039/C3EE42351D ↗
25. Improved cycle performance of LiNi0.8Co0.1Mn0.1O2 positive electrode material in highly concentrated LiBF4/DMC10.1149/2.0291902jes ↗
26. Polymer electrolytes for lithium polymer batteries10.1039/C6TA02621D ↗
27. A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries10.1038/ncomms2513 ↗
28. Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries10.1038/s41560-018-0196-y ↗
29. Fire-extinguishing organic electrolytes for safe batteries10.1038/s41560-017-0033-8 ↗
30. Fluorinated electrolytes for 5-V Li-ion chemistry: probing voltage stability of electrolytes with electrochemical floating test10.1149/2.0231509jes ↗
31. Comparative study of EC/DMC LiTFSI and LiPF6 electrolytes for electrochemical storage10.1016/j.jpowsour.2011.07.071 ↗
32. Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis10.1016/j.jpowsour.2005.05.085 ↗
33. Preparation of PVDF-HFP microporous membrane for Li-ion batteries by phase inversion10.1016/j.memsci.2005.12.038 ↗
34. Electrochemical measurement of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
35. Spectroscopic characterization of the conformational states of the bis(trifluoromethanesulfonyl)imide anion (TFSI-)10.1002/jrs.1347 ↗
36. The complex dance of the two conformers of bis(trifluoromethanesulfonyl)imide as a function of pressure and temperature10.1021/acs.jpcb.5b12537 ↗
37. A Raman spectroscopic study of organic electrolyte solutions based on binary solvent systems of ethylene carbonate with low viscosity solvents which dissolve different lithium salts10.1039/a806278a ↗
38. Study of a lithium battery by confocal Raman microspectrometry10.1016/S0013-4686(97)10050-0 ↗
39. Edman · 2000 · 3476
40. Lithium solvation in a PMMA membrane plasticized by a lithium-conducting ionic liquid based on 1-butyl-3-methylimidazolium bis (trifluoromethanesulfonyl) imide10.1002/jrs.1962 ↗
41. Electrolyte design for fast-charging Li-ion batteries10.1016/j.trechm.2020.01.011 ↗
42. A study of the Li/Li+ couple in DMC and PC solvents : Part 1: characterization of LiAsF6/DMC and LiAsF6/PC solutions10.1016/S0013-4686(98)00365-X ↗
43. On the conformational behavior of dimethyl carbonate10.1039/a901046g ↗
44. Probing electrolyte solvents at solid/liquid interface using gap-mode surface-enhanced Raman spectroscopy10.1149/2.0391902jes ↗
45. Perspectives for polymer electrolytes: a view from fundamentals of ionic conductivity10.1021/acs.macromol.9b02742 ↗
46. Bard · 2015
47. Ternary polymer electrolytes incorporating pyrrolidinium-imide ionic liquids10.1039/C4RA16070C ↗
48. Development of ion conducting polymer gel electrolyte membranes based on polymer PVdF-HFP, BMIMTFSI ionic liquid and the Li-salt with improved electrical, thermal and structural properties10.1039/C5TC00940E ↗
49. Elucidation of transport mechanism and enhanced alkali ion transference numbers in mixed alkali metal-organic ionic molten salts10.1039/C6CP01411A ↗
50. Decoupling effective Li+ion conductivity from electrolyte viscosity for improved room-temperature cell performance10.1016/j.jpowsour.2016.12.071 ↗
51. Anodic oxidation of nonaqueous electrolytes on cathode materials and current collectors for rechargeable lithium batteries10.1016/S0378-7753(99)00141-X ↗
52. Factors that influence formation of AlF3 passive film on aluminum in li-ion battery electrolytes with LiPF6
53. Aluminium corrosion in room temperature molten salt10.1016/j.jpowsour.2003.12.046 ↗
54. Suppression of aluminum corrosion by using high concentration LiTFSI electrolyte10.1016/j.jpowsour.2012.12.028 ↗
55. Dendritic growth mechanisms in lithium/polymer cells10.1016/S0378-7753(98)00242-0 ↗
56. Nanofiber-reinforced polymer electrolytes toward room temperature solid-state lithium batteries10.1016/j.jpowsour.2019.227424 ↗
57. Flowable polymer electrolytes for lithium metal batteries10.1016/j.jpowsour.2019.03.057 ↗
58. Trifluoromethyl-free anion for highly stable lithium metal polymer batteries10.1016/j.ensm.2020.07.022 ↗