Co-contribution of quenching and nanocrystallization on ionic-conductivity improvement of a composite electrolyte of polyethylene Oxide/Li7La3Zr2O12 nanofibers at 45 °C for all-solid-state Li metal batteries
Source abstract
Abstract
Abstract Solid electrolytes have been actively researched for rechargeable lithium batteries, but low ion conductivity (σ) and the growth of lithium dendrites hinder their practical applications. This study synthesizes a composite solid electrolyte combining polyethylene oxide (PEO) with Li7La3Zr2O12 nanofibers (LLZO NFs) and quenching in liquid nitrogen. The LLZO NFs efficiently increase the σ and mechanical strength of composite polymer electrolytes (CPEs), thereby promoting the uniform deposition of lithium metal and inhibiting the growth of lithium dendrites. More importantly, the quenching markedly reduces the crystallinity of the electrolyte, which further enhances the ionic conductivity even at 30 °C. The CPEs exhibit high σ (1.09 × 10−4 S cm−1 at 30 °C) and enlarged electrochemical window (up to 5 V vs. Li/Li+). An integrated all-solid-state lithium metal battery (ASSLMBs) (labeled as LiFePO4|PEO/LLZO NFs/LiTFSI-q|Li) delivers high initial discharge capacity (138.8 mAh g−1) and excellent cycling stability (74.8% at 0.5C after 300 cycles) with remarkable capacity retention (84.0% at 1C after 200 cycles) at 45 °C. This strategy enables the promotion and application of ASSLMBs at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. One-pot synthesis of crosslinked polymer electrolyte beyond 5V oxidation potential for all-solid-state lithium battery10.1016/j.jpowsour.2019.05.040 ↗
2. Stable seamless interfaces and rapid ionic conductivity of Ca–CeO2/LiTFSI/PEO composite electrolyte for high‐rate and high‐voltage all‐solid‐state battery10.1002/aenm.202000049 ↗
3. An ultrathin, strong, flexible composite solid electrolyte for high-voltage lithium metal batteries10.1039/D0TA05644H ↗
4. Poly (Ethylene Oxide)−LiTFSI solid polymer electrolyte filaments for fused deposition modeling three-dimensional printing10.1149/1945-7111/ab7c38 ↗
5. New insights into the compositional dependence of Li-Ion transport in polymer–ceramic composite electrolytes10.1021/acsami.7b17301 ↗
6. Development of all-solid-state battery based on lithium ion conductive polymer nanofiber framework10.1016/j.jpowsour.2019.03.066 ↗
7. Dendrite-free lithium metal and sodium metal batteries10.1016/j.ensm.2019.12.014 ↗
8. A solid‐state battery cathode with a polymer composite electrolyte and low tortuosity microstructure by directional freezing and polymerization
9. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte10.1002/anie.201914478 ↗
10. Fast charge transfer across the Li7La3Zr2O12 solid electrolyte/LiCoO2 cathode interface enabled by an interphase-engineered all-thin-film architecture10.1021/acsami.0c09777 ↗
11. 3D polyacrylonitrile nanofibers and flexible polydimethylsiloxane macromolecule combinedly all-solid-state composite electrolyte for efficient lithium metal batteries10.1039/D0NR04244G ↗
12. In situ construction of a LiF‐enriched interface for stable All‐solid‐state batteries and its origin revealed by cryo‐TEM10.1002/adma.202000223 ↗
13. Flexible all-solid-state li-ion battery manufacturable in ambient atmosphere10.1021/acsami.0c07523 ↗
14. All-solid-state lithium ion battery using garnet-type oxide and Li3BO3 solid electrolytes fabricated by screen-printing10.1016/j.jpowsour.2013.02.073 ↗
15. Evaluation of Li6P2S8I solid electrolyte for all solid-state lithium battery applications10.1016/j.cej.2020.126179 ↗
16. Excellent performance single-crystal NCM cathode under high mass loading for all-solid-state lithium batteries10.1016/j.electacta.2020.137185 ↗
17. Hierarchical composite‐solid‐electrolyte with high electrochemical stability and interfacial regulation for boosting ultra‐stable lithium batteries
18. Adhesive sulfide solid electrolyte interface for lithium metal batteries10.1021/acsami.0c17828 ↗
19. A solid-state route to stabilize cubic Li7La3Zr2O12 at low temperature for all-solid-state-battery applications10.1039/D0CC04437G ↗
20. In-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries10.1038/s41467-020-19726-5 ↗
21. Room-temperature, high-voltage solid-state lithium battery with composite solid polymer electrolyte with in-situ thermal safety study10.1016/j.cej.2020.125996 ↗
22. A preeminent gel blending polymer electrolyte of poly (vinylidene fluoride-hexafluoropropylene)-poly (propylene carbonate) for solid-state lithium ion batteries10.1016/j.electacta.2018.11.182 ↗
23. Photopolymerized gel electrolyte with unprecedented room‐temperature ionic conductivity for high‐energy‐density solid‐state sodium metal batteries
24. Enhancement of ionic conductivity of composite membranes for all-solid-state lithium rechargeable batteries incorporating tetragonal Li7La3Zr2O12 into a polyethylene oxide matrix10.1016/j.jpowsour.2014.10.078 ↗
25. Ionic conduction in composite polymer electrolytes: case of PEO: Ga-LLZO composites10.1021/acsami.8b17279 ↗
26. 3D Coral-like LLZO/PVDF composite electrolytes with enhanced ionic conductivity and mechanical flexibility for solid-state lithium batteries10.1021/acsami.0c15004 ↗
27. In-situ generation of high performance thiol-conjugated solid polymer electrolytes via reliable thiol-acrylate click chemistry10.1016/j.jpowsour.2020.228024 ↗
28. Polymer electrolyte with dual functional groups designed via theoretical calculation for all-solid-state lithium batteries10.1016/j.jpowsour.2019.227614 ↗
29. In situ formation of a bifunctional interlayer enabled by a conversion reaction to initiatively prevent lithium dendrites in a garnet solid electrolyte10.1039/C8EE03390K ↗
30. Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions10.1038/s41563-019-0305-8 ↗
31. High-performance Li6.4La3Zr1.4Ta0.6O12/Poly (ethylene oxide)/Succinonitrile composite electrolyte for solid-state lithium batteries10.1016/j.jpowsour.2018.07.005 ↗
32. Dendrite-free lithium metal solid battery with a novel polyester based triblock copolymer solid-state electrolyte
33. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
34. Superior lithium ion conduction of polymer electrolyte with comb-like structure via solvent-free copolymerization for bipolar all-solid-state lithium battery10.1039/C8TA04477E ↗
35. Topological polymer electrolyte containing poly (pinacol vinylboronate) segments composited with ceramic nanowires towards ambient-temperature superior performance all-solid-state lithium batteries10.1016/j.jpowsour.2018.12.039 ↗
36. Nanoporous adsorption effect on alteration of the Li+ diffusion pathway by a highly ordered porous electrolyte additive for high-rate all-solid-state lithium metal batteries10.1021/acsami.8b06574 ↗
37. Garnet Si–Li7La3Zr2O12 electrolyte with a durable, low resistance interface layer for all-solid-state lithium metal batteries10.1016/j.jpowsour.2020.227881 ↗
38. Space-charge effects at the Li7La3Zr2O12/Poly (ethylene oxide) interface10.1021/acsami.8b19237 ↗
39. Improving ionic conductivity with bimodal-sized Li7La3Zr2O12 fillers for composite polymer electrolytes10.1021/acsami.8b21770 ↗
40. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte10.1002/anie.201914478 ↗
41. A temperature‐responsive electrolyte endowing superior safety characteristic of lithium metal batteries