journal article·2021-03

A mixed electron/ion conducting interlayer enabling ultra-stable cycle performance for solid state lithium sulfur batteries

Zengqi Zhang, Beibei Zhao, Shu Zhang, Jianjun Zhang, Pengxian Han, Xiaogang Wang, Furui Ma, Deye Sun, Yongcheng Jin, Kiyoshi Kanamura, Ganglei Cui

Publisher page

Abstract

Abstract Replacement liquid electrolyte with solid polymer electrolytes (SPEs) is an effective strategy to boost the development of high performance lithium sulfur (Li–S) batteries. However, most of reported solid state Li–S batteries (SSLSBs) with SPEs show unsatisfying cycle performances owing to low utilization of S and notorious shuttle effect. In our case, to address above issues, a mixed electron/ion conducting interlayer which consists of carbon nanotubes, polyethylene oxide and lithium salt is introduced into SSLSBs. The carbon nanotubes and mixture of polymer/lithium salt construct conductive channels of electrons and Li ions, respectively, resulting in electronic/ionic conductivity of the interlayer. Additionally, the carbon nanotubes of interlayer can absorb polysulfides. Therefore, the interlayer can localize polysulfides and deliver electrons/Li ions to them, enabling polysulfides to accomplish redox reaction in the interlayer. The results shows that SSLSBs with interlayer deliver initial discharge capacity of 750 mAh g−1 at 0.05 C under ambient temperature, and 83.8% capacity is retained after 320 cycles. Even the current rate is increased to 0.1 C, the SSLSBs show an initial discharge capacity of 740 mAh g−1 with 70% capacity retention after 400 cycles. Undoubtedly, the strategy of the mixed electron/ion conducting interlayer will be a milestone to SSLSBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Improvement of Li-S battery electrochemical performance with 2D TiS2 additive10.1016/j.electacta.2018.09.191 ↗
3. An armored mixed conductor interphase on a DendriteFree lithium-metal anode10.1002/adma.201804461 ↗
4. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
5. N-doped carbon-coated hollow carbon nanofibers with interspersed TiO2 for integrated separator of Li-S batteries10.1016/j.electacta.2018.12.009 ↗
6. A flexible 3D multifunctional MgO-decorated carbon Foam@CNTs hybrid as self-supported cathode for high-performance lithium-sulfur batteries10.1002/adfm.201702573 ↗
7. “Brain-Coral-Like” mesoporous hollow CoS2@N-doped graphitic carbon nanoshells as efficient sulfur reservoirs for lithium–sulfur batteries
8. Conductive CoOOH as carbon-free sulfur immobilizer to fabricate sulfur-based composite for lithium–sulfur battery
9. A comprehensive understanding of lithium–sulfur battery technology
10. Sulfur-based catholyte solution with a glass-ceramic membrane for Li–S batteries10.1002/celc.201500342 ↗
11. Three-dimensional spongy framework as superlyophilic, strongly absorbing, and electrocatalytic polysulfide reservoir layer for high-rate and long-cycling lithium sulfur batteries10.1007/s12274-018-2168-8 ↗
12. Dendrite-Free and stable lithium metal anodes enabled by an antimony-based lithiophilic interphase10.1021/acs.chemmater.9b02356 ↗
13. Mixed ion and electron-conducting scaffolds for high-rate lithium metal anodes
14. Synergistically Enhanced Polysulfide chemisorption using a flexible hybrid separator with N and S dual-doped mesoporous carbon coating for advanced lithium-sulfur batteries10.1021/acsami.6b03642 ↗
15. A newly designed composite gel polymer electrolyte based on poly(vinylidene fluoride -Hexafluoropropylene) (PVDF-HFP) for enhanced solid-state lithium-sulfur batteries10.1002/chem.201703464 ↗
16. Structural and chemical synergistic encapsulation of polysulfides enables ultralong-life lithium–sulfur batteries10.1039/C6EE00194G ↗
17. Ma · Energy Storage Mater · 2018 · 14 · 25810.1016/j.ensm.2018.04.016 ↗
18. Recent research trends in Li-S batteries10.1039/C8TA01483C ↗
19. Designing safe electrolyte systems for a high stability Li-S battery
20. Electrochemical stability of Li10GeP2S12 and Li7La3Zr2O12 solid electrolytes10.1002/aenm.201501590 ↗
21. Ionic liquid-immobilized polymer gel electrolyte with self-healing capability, high ionic conductivity and heat resistance for dendrite-free lithium metal batteries10.1016/j.nanoen.2018.09.059 ↗
22. P(VDF-HFP)-poly(sulfur-1,3- diisopropenylbenzene) functional polymerelectrolyte for lithium– sulfur batteries10.1016/j.jechem.2019.10.009 ↗
23. Superstretchable, thermostable and ultrahigh-loading lithium–sulfur batteries based on nanostructural gel cathodes and gel electrolytes10.1016/j.nanoen.2020.105510 ↗
24. Lithium battery chemistries enabled by solid state electrolytes10.1038/natrevmats.2016.103 ↗
25. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
26. Computational study of lithium nucleation tendency in Li7La3Zr2O12 (LLZO) and rational design of interlayer materials to prevent lithium dendrites10.1016/j.jpowsour.2018.04.098 ↗
27. Safety-reinforced poly(propylene carbonate)-based all-solidstate polymer electrolyte for ambient-temperature solid polymer lithium batteries10.1002/aenm.201501082 ↗
28. Increasing the conductivity of crystalline polymer electrolytes10.1038/nature03186 ↗
29. High ionic conductivity of composite solid polymer electrolyte via in situ synthesis of monodispersed SiO2 nanospheres in poly(ethylene oxide)10.1021/acs.nanolett.5b04117 ↗
30. Moving to a solid-state configuration: a valid approach to making lithium-sulfur batteries viable for practical applications10.1002/adma.201002584 ↗
31. Sulfur double locked by a macro-structural cathode and a solid polymer electrolyte for lithium-sulfur batteries10.1039/C5TA01037C ↗
32. Stabilization of all-solid-state Li-S batteries with a polymer-ceramic sandwich electrolyte by atomic layer deposition10.1039/C8TA09069F ↗
33. Preparation and evaluation of high lithium ion conductivity Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte obtained using a new solution method10.1016/j.ssi.2016.07.010 ↗
34. Organic-inorganic hybrid solid electrolytes for solid-state lithium cells operating at room temperature10.1016/j.electacta.2016.09.141 ↗
35. Structural and dielectric properties of NaIO4-complexed PEO/PVP blended solid polymer electrolytes10.1016/j.cap.2017.07.012 ↗
36. Suppression of lithium dendrite formation by using LAGP-PEO (LiTFSI) composite solid electrolyte and lithium metal anode modified by PEO (LiTFSI) in all-solid-state lithium batteries10.1021/acsami.7b00336 ↗
37. A gel polymer electrolyte based lithium-sulfur battery with low self discharge10.1016/j.ssi.2017.08.018 ↗
38. High-conductivity argyrodite Li6PS5Cl solid electrolytes prepared via optimized sintering processes for all-solid-state lithium−sulfur batteries10.1021/acsami.8b15121 ↗
39. High-performance all-solid-state lithium−sulfur battery enabled by a mixed-conductive Li2S nanocomposite10.1021/acs.nanolett.6b01754 ↗
40. Reaction mechanism optimization of solid state Li-S batteries with a PEO-based electrolyte
41. Tungsten disulfide catalysts supported on a carbon cloth interlayer for high performance Li–S battery10.1002/aenm.201602567 ↗
42. Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries10.1016/j.nanoen.2017.01.040 ↗
43. Electrocatalytic polysulfide traps for controlling redox shuttle process of Li−S batteries10.1039/C8EE03252A ↗
44. Direct racking of the polysulfide shuttling and interfacial evolution in all-solid-state lithium-sulfur batteries: a degradation mechanism study10.1039/C9EE00578A ↗
45. S-containing copolymer as cathode material in poly(ethylene oxide)-based all-solid-state Li-S batteries10.1016/j.jpowsour.2018.04.052 ↗
46. Ionic conductivity promotion of polymer electrolyte with ionic grafted oxides for all-solid-state lithium-sulfur batteries10.1039/C7TA03699J ↗
47. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte