In situ polarization study of zinc–cerium redox flow batteries
Source abstract
Abstract
Abstract An in situ investigation of the sources of performance loss during discharge of a zinc-cerium redox flow battery (RFB) has been carried out. Polarization and electrochemical impedance spectroscopy (EIS) measurements on a bench-scale zinc-cerium RFB are combined to determine the overpotentials due to kinetic and ohmic effects and provide an estimate of the mass transfer losses. In order to further evaluate the source of these overpotentials, the contribution of each half-cell is evaluated by insertion of Ag/AgCl reference electrodes at each of the two inlets to the battery. Measurements reveal that most of the losses are due to the kinetic overpotential of the Zn/Zn 2 + half-cell at low and intermediate current densities. Additionally, in situ kinetic analysis reveals that the exchange current density is ~ 7.4 × 10 − 3 A cm − 2 for Zn/Zn 2 + oxidation and ~ 24.2 × 10 − 3 A cm − 2 for Ce 4 + reduction. The difference in these values supports the conclusion that the slower kinetics at the negative electrode limits the performance at low and intermediate current densities. The effects of an alternative mixed sulfonate/chloride electrolyte to facilitate the kinetics of the Zn/Zn 2 + redox couple and electrolyte flow rate to enhance the mass transfer at the positive electrode are also investigated through in situ polarization experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Advanced redox-flow batteries: a perspective10.1149/2.0101601jes ↗
2. Energy storage for the electricity grid: benefits and market potential assessment guide
3. Redox flow cells for energy conversion10.1016/j.jpowsour.2006.02.095 ↗
4. A novel single flow zinc–bromine battery with improved energy density10.1016/j.jpowsour.2013.01.193 ↗
5. Characterization of a zinc–cerium flow battery10.1016/j.jpowsour.2011.01.095 ↗
6. Preliminary study of high energy density zn/ni flow batteries10.1016/j.jpowsour.2015.06.110 ↗
7. Characteristics of a new all-vanadium redox flow battery10.1016/0378-7753(88)80005-3 ↗
8. A mixed acid based vanadium–cerium redox flow battery with a zero-gap serpentine architecture10.1016/j.jpowsour.2014.10.034 ↗
9. A novel iron-lead redox flow battery for large-scale energy storage10.1016/j.jpowsour.2017.02.018 ↗
10. A high-performance all-iron non-aqueous redox flow battery10.1016/j.jpowsour.2019.227331 ↗
11. Redox-flow batteries: from metals to organic redox-active materials10.1002/anie.201604925 ↗
12. Progress in redox flow batteries, remaining challenges and their applications in energy storage10.1039/c2ra21342g ↗
13. Cerium batteries
14. Zinc deposition and dissolution in methanesulfonic acid onto a carbon composite electrode as the negative electrode reactions in a hybrid redox flow battery10.1016/j.electacta.2011.04.111 ↗
15. Evaluation of carbon composite materials for the negative electrode in the zinc–cerium redox flow cell10.1016/j.jpowsour.2011.01.036 ↗
16. Electrodeposition and electrodissolution of zinc in mixed methanesulfonate-based electrolytes10.1016/j.electacta.2018.02.087 ↗
17. Cerium-zinc redox flow battery: positive half-cell electrolyte studies10.1016/S1002-0721(10)60499-1 ↗
18. The developments and challenges of cerium half-cell in zinc–cerium redox flow battery for energy storage10.1016/j.electacta.2012.12.066 ↗
19. Ce (iii)/ce (iv) in methanesulfonic acid as the positive half cell of a redox flow battery10.1016/j.electacta.2010.12.038 ↗
20. Impact of electrolyte composition on the performance of the zinc–cerium redox flow battery system10.1016/j.jpowsour.2013.06.045 ↗
21. Improvement of zinc-cerium redox flow batteries using mixed methanesulfonate-chloride negative electrolyte10.1016/j.apenergy.2019.113894 ↗
22. Polarization curve analysis of all-vanadium redox flow batteries10.1007/s10800-011-0335-7 ↗
23. Determination of overpotentials in all vanadium redox flow batteries10.1149/05837.0001ecst ↗
24. Degradation of all-vanadium redox flow batteries (vrfb) investigated by electrochemical impedance and x-ray photoelectron spectroscopy: Part 2 electrochemical degradation10.1016/j.jpowsour.2016.06.040 ↗
25. In situ kinetics studies in all-vanadium redox flow batteries10.1149/2.001303eel ↗
26. A complex four-point method for the evaluation of ohmic and faradaic losses within a redox flow battery single-cell
27. Probing electrode losses in all-vanadium redox flow batteries with impedance spectroscopy10.1149/2.001305eel ↗
28. The importance of cell geometry and electrolyte properties to the cell potential of zn-ce hybrid flow batteries10.1149/2.0261601jes ↗
29. Mass transport and active area of porous pt/ti electrodes for the zn-ce redox flow battery determined from limiting current measurements10.1016/j.electacta.2016.10.097 ↗
30. Local potential measurement through reference electrodes in vanadium redox flow batteries: evaluation of overpotentials and electrolytes imbalance10.1016/j.jpowsour.2018.08.033 ↗
31. Performance characteristics of carbon plastic electrodes in the all-vanadium redox cell10.1149/1.2097588 ↗
32. Nikiforidis · 2012
33. Electrochemical redox processes involving soluble cerium species10.1016/j.electacta.2016.04.062 ↗