journal article·2020-03Open access

Optimisation of the internal structure of ceramic membranes for electricity production in urine-fed microbial fuel cells

M.J. Salar-García, I. Ieropoulos

Abstract

The need to find a feasible alternative to commercial membranes for microbial fuel cells (MFCs) poses an important challenge for the practical implementation of this technology. This work aims to analyse the influence of the internal structure of low-cost terracotta clay-based membranes on the behaviour of MFCs. To this purpose, 9 different combinations of temperature and time were used to prepare 27 MFC separators. The results show that the temperature has a significant effect on both porosity and pore size distribution, whereas the ramp time do not show a significant influence on these parameters. It was observed that kilning temperatures higher than 1030 °C dramatically reduce the porosity of the samples, reaching a minimum value of 16.85%, whereas the pore size increases as the temperature also increases. Among the membranes with similar porosities, those with a medium pore size distribution exhibited the lowest bulk resistance allowing MFCs to reach the highest power output (94.67 μW cm−2). These results demonstrate the importance of not only the porosity but also the pore size distribution of the separator in terms of MFC performance and longevity, which for these experiments was for 90 days.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Advanced Photocatalysis Techniques · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Energy by microbial fuel cells: scientometric global synthesis and challenges10.1016/j.rser.2016.06.050 ↗
2. Microbial fuel cell as new technology for bioelectricity generation: a review10.1016/j.aej.2015.03.031 ↗
3. Microbial fuel cells10.1042/bst0110451 ↗
4. Electrical effects accompanying the decomposition of organic compounds
5. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
6. A review of the substrates used in microbial fuel cells (MFCs) for sustainable energy production10.1016/j.biortech.2009.10.017 ↗
7. Recent advances in the use of different substrates in microbial fuel cells toward wastewater treatment and simultaneous energy recovery10.1016/j.apenergy.2016.01.056 ↗
8. Strategies for optimizing the power output of microbial fuel cells: transitioning from fundamental studies to practical implementation10.1016/j.apenergy.2018.10.015 ↗
9. Architectural adaptations of microbial fuel cells10.1007/s00253-018-9339-0 ↗
10. Electrode materials for microbial fuel cells: nanomaterial approach10.1007/s40243-015-0063-8 ↗
11. Microbial fuel cells: from fundamentals to applications. A review10.1016/j.jpowsour.2017.03.109 ↗
12. Iron-streptomycin derived catalyst for efficient oxygen reduction reaction in ceramic microbial fuel cells operating with urine10.1016/j.jpowsour.2019.03.052 ↗
13. Architectural engineering of bioelectrochemical systems from the perspective of polymeric membrane separators: a comprehensive update on recent progress and future prospects10.1016/j.memsci.2018.07.051 ↗
14. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
15. Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells10.1016/j.biortech.2013.08.163 ↗
16. Long-term bio-power of ceramic Microbial Fuel Cells in individual and stacked configurations10.1016/j.bioelechem.2020.107459 ↗
17. Development of efficient electroactive biofilm in urine-fed microbial fuel cell cascades for bioelectricity generation10.1016/j.jenvman.2019.109992 ↗
18. A comprehensive study of custom-made ceramic separators for microbial fuel cells: towards “Living” bricks10.3390/en12214071 ↗
19. Living architecture: towards energy generating buildings powered by microbial fuel cells10.3389/fenrg.2019.00094 ↗
20. Possibilities to control ceramics properties by changing firing cycles10.1016/j.conbuildmat.2007.12.012 ↗
21. Facile co-sintering process to fabricate sustainable antifouling silver nanoparticles (AgNPs)-enhanced tight ceramic ultrafiltration membranes for protein separation10.1016/j.memsci.2019.117402 ↗
22. Comprehensive study on ceramic membranes for low-cost microbial fuel cells10.1002/cssc.201501320 ↗
23. Comparing terracotta and earthenware for multiple functionalities in microbial fuel cells10.1007/s00449-013-0967-6 ↗
24. Binder materials for the cathodes applied to self-stratifying membraneless microbial fuel cell10.1016/j.bioelechem.2018.04.011 ↗
25. Application of mercury-intrusion method for determination of pore-size distribution to membrane filters10.1126/science.120.3124.805 ↗
26. Methods to study the ionic conductivity of polymeric electrolytes using a.c. impedance spectroscopy10.1007/s100080000190 ↗
27. Impedance spectroscopy of reactive polymers. 110.1002/polb.1994.090321509 ↗
28. A method based on impedance spectroscopy for predicting the behavior of novel ionic liquid-polymer inclusion membranes in microbial fuel cells10.1016/j.energy.2015.05.149 ↗
29. Effect of sintering temperature on membranes manufactured with clays for textile effluent treatment10.1155/2015/371697 ↗
30. Preparation and characterization of low cost ceramic membranes for micro-filtration applications10.1016/j.clay.2007.12.001 ↗
31. Influence of mineralogy and firing temperature on the porosity of bricks10.1016/S0955-2219(03)00249-8 ↗
32. The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic–chloritic clays10.1016/S0169-1317(01)00076-X ↗
33. Ink-bottle effect in mercury intrusion porosimetry of cement-based materials10.1006/jcis.2001.7962 ↗
34. Ink-bottle effect and pore size distribution of cementitious materials identified by pressurization-depressurization cycling mercury intrusion porosimetry
35. Effect of the ceramic membrane properties on the microbial fuel cell power output and catholyte generation10.1016/j.jpowsour.2019.04.043 ↗
36. Electrochemical impedance spectroscopy for microbial fuel cell characterization
37. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
38. Ceramic-based microbial fuel cells (MFCs): a review10.1016/j.ijhydene.2016.06.054 ↗
39. Iron-streptomycin derived catalyst for efficient oxygen reduction reaction in ceramic microbial fuel cells operating with urine10.1016/j.jpowsour.2019.03.052 ↗
40. Towards monolithically printed Mfcs: development of a 3d-printable membrane electrode assembly (mea)10.1016/j.ijhydene.2018.12.163 ↗