A novel rechargeable iodide ion battery with zinc and copper anodes
Source abstract
Abstract
Abstract In recent years, metal ion batteries have been developed rapidly and have been made great progress, but non-metal ion batteries have rarely been reported. In our work, carbon black (cb) is used as cathode material for iodine-ion battery. The electrolyte uses ethylene glycol as a solvent and exhibits exceptional stability, and has been experimentally proven to have high cycle stability when zinc and copper are used as anodes for iodide-ion battery. When the zinc foil is used as the negative electrode, the specific capacity is 83 mA h gcb−1 at charge current density of 1 A g−1, and the specific capacity does not attenuated after 10000 cycles. Under the same conditions, when the copper foil is used as negative electrode, the average specific capacity is 92 mA h gcb−1, and the specific capacity is 50 mA h gcb−1 after about 4000 cycles. After X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) characterization tests, it is verified that the iodide-ion is intercalated in the carbon material instead of the redox reaction during the charging and discharging process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Building aqueous K-ion batteries for energy storage10.1038/s41560-019-0388-0 ↗
3. TiO2-Coated interlayer-expanded MoSe2/Phosphorus doped carbon nanospheres for ultrafast and ultralong cycling sodium storage
4. Water-activated VOPO4 for magnesium ion batteries10.1021/acs.nanolett.8b02854 ↗
5. Suppressed activation energy for interfacial charge transfer of a prussian blue analog thin film electrode with hydrated ions (Li+, Na+, and Mg2+)10.1021/jp311616s ↗
6. Polyaniline-intercalated manganese dioxide nanolayers as a high-performance cathode material for an aqueous zinc-ion battery10.1038/s41467-018-04949-4 ↗
7. An electrolytic Zn-MnO2 battery for high-voltage and scalable energy storage10.1002/anie.201904174 ↗
8. Reversible aqueous zinc/manganese oxide energy storage from conversion reactions10.1038/nenergy.2016.39 ↗
9. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
10. 3D graphitic foams derived from chloroaluminate anion intercalation for ultrafast aluminum-ion battery10.1002/adma.201602958 ↗
11. Room-temperature cycling of metal fluoride electrodes: liquid electrolytes for high-energy fluoride ion cells10.1126/science.aat7070 ↗
12. Nanostructured fluorite-type fluorides as electrolytes for fluoride ion batteries10.1021/jp3117825 ↗
13. Batteries based on fluoride shuttle10.1039/c1jm13535j ↗
14. Solid electrolytes for fluoride ion batteries: ionic conductivity in polycrystalline tysonite-type fluorides10.1021/am4052188 ↗
15. An aluminum chlorine rechargeable cell employing a room-temperature molten-salt electrolyte10.1149/1.2095685 ↗
16. Flow batteries: current status and trends10.1021/cr500720t ↗
17. High-performance rechargeable lithium-iodine batteries using triiodide/iodide redox couples in an aqueous cathode10.1038/ncomms2907 ↗
18. A rechargeable non-aqueous Mg-Br-2 battery10.1016/j.nanoen.2016.09.003 ↗
19. High power rechargeable magnesium/iodine battery chemistry10.1038/ncomms14083 ↗
20. Rechargeable aluminum/iodine battery redox chemistry in ionic liquid electrolyte10.1021/acsenergylett.7b00160 ↗
21. An iodine quantum dots based rechargeable sodium-iodine battery10.1002/aenm.201601885 ↗
22. A long cycle life, self-healing zinc-iodine flow battery with high power density10.1002/anie.201803122 ↗
23. Ultrathin hierarchical porous carbon nanosheets for high-performance supercapacitors and redox electrolyte energy storage10.1002/adma.201705789 ↗
24. A rechargeable iodine-carbon battery that exploits ion intercalation and iodine redox chemistry10.1038/s41467-017-00649-7 ↗
25. The electro-deposition/dissolution of CuSO4 aqueous electrolyte investigated by in situ soft X-ray absorption spectroscopy10.1021/acs.jpcb.7b06728 ↗
26. Impedance behavior of a sulfuric acid cupric sulfate/copper cathode interface10.1149/1.2100677 ↗
27. Extremely safe, high-rate and ultralong-life zinc-ion hybrid supercapacitors10.1016/j.ensm.2018.01.003 ↗
28. A novel zinc-ion hybrid supercapacitor for long-life and low-cost energy storage applications10.1016/j.ensm.2017.12.022 ↗
29. A capacity recoverable zinc-ion micro-supercapacitor10.1039/C8EE02567C ↗
30. Electrochemical polymerization of polyaniline doped with Cu2+ as the electrode material for electrochemical supercapacitors
31. Carbon dot stabilized copper sulphide nanoparticles decorated graphene oxide hydrogel for high performance asymmetric supercapacitor10.1016/j.carbon.2017.06.076 ↗
32. Hierarchically structured MnO2/graphene/carbon fiber and porous graphene hydrogel wrapped copper wire for fiber-based flexible all-solid-state asymmetric supercapacitors10.1039/C5TA02331A ↗
33. Iodine modified carbon nitride semiconductors as visible light photocatalysts for hydrogen evolution10.1002/adma.201303611 ↗
34. Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction
35. One-step preparation of iodine-doped graphitic carbon nitride nanosheets as efficient photocatalysts for visible light water splitting10.1039/C4TA06093H ↗
36. The influence of activated carbon surface chemical composition on the adsorption of acetaminophen (paracetamol) in vitro Part II. TG, FTIR, and XPS analysis of carbons and the temperature dependence of adsorption kinetics at the neutral pH10.1016/S0927-7757(00)00594-X ↗
37. Construction of conjugated carbon nitride nanoarchitectures in solution at low temperatures for photoredox catalysis10.1002/anie.201206534 ↗
38. Preparation and characterization of PAN-based ultra-fine activated carbon fiber adsorbent10.1007/s10934-010-9388-y ↗
39. Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites10.1016/j.compscitech.2008.02.003 ↗
40. Characterization by IR spectroscopy of an hybrid sol-gel material used for photonic devices fabrication10.1016/j.jnoncrysol.2007.07.091 ↗
41. Oxidation of black carbon by biotic and abiotic processes10.1016/j.orggeochem.2006.06.022 ↗