journal article·2019-09

Development of proton conducting fuel cells using nickel metal support

Sajad Vafaeenezhad, Navjot Kaur Sandhu, Amir Reza Hanifi, Thomas H. Etsell, Partha Sarkar

Publisher page

Abstract

Abstract This research reports the fabrication of a metal supported fuel cell based on the well-known proton conducting electrolyte (PCE) BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ (BZCYYb) material. The impact of the addition of YSZ on the anode microstructure is also described. This solid oxide fuel cell (SOFC) consists of Ni:yttria stabilized zirconia (YSZ) support (with different weight ratios of Ni:YSZ), Ni-BZCYYb anode functional layer (AFL), BZCYYb electrolyte and LSCF-BZCYYb cathode. The results show that addition of only 10 wt% YSZ to the support improves the microstructure of the cell by preventing severe Ni grain growth inside the support, and providing more accessible triple phase boundaries (TPBs) at the contact surface of the support/AFL and better distribution of the fuel gas to the accessible TPBs. As a result of microstructural improvement, polarization resistance of the cells with 10 wt% YSZ decreases compared with the cell having pure Ni metal. The cell containing YSZ in the support shows 67 h of stable operation under potentiostatic SOFC condition without any degradation. The current metal supported tubular fuel cell shows promising electrochemical and microstructural features which has the possibility to replace the conventional (Ni-PCE) or even Ni-YSZ anode supports.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
2. Fuel cell materials and components10.1016/j.actamat.2003.08.004 ↗
3. Advances in solid oxide fuel cells: review of progress through three decades of the international symposia on solid oxide fuel cells10.1149/07801.0063ecst ↗
4. Electrochemical performance of a short tubular solid oxide fuel cell stack at intermediate temperatures10.1016/j.apenergy.2016.08.179 ↗
5. Effect of Ni content on the morphological evolution of Ni-YSZ solid oxide fuel cell electrodes10.1063/1.4942459 ↗
6. Manufacturing and characterization of metal-supported solid oxide fuel cells10.1016/j.jpowsour.2010.08.088 ↗
7. Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production10.1016/0167-2738(81)90113-2 ↗
8. Enhancing sinterability and electrochemical properties of Ba(Zr0.1Ce0.7Y0.2)O3-δ proton conducting electrolyte for solid oxide fuel cells by addition of NiO10.1016/j.ijhydene.2018.05.089 ↗
9. Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides10.1016/S0167-2738(99)00188-5 ↗
10. The kinetics of oxygen transport in 9.5 mol % single crystal yttria stabilised zirconia10.1016/S0167-2738(97)00345-7 ↗
11. Materials for fuel-cell technologies10.1038/35104620 ↗
12. Advances in solid oxide fuel cell technology10.1016/S0167-2738(00)00452-5 ↗
13. Prospect of hydrogen technology using proton-conducting ceramics10.1016/j.ssi.2003.03.001 ↗
14. Solid-state protonic conductors: principles, properties, progress and prospects10.1016/S0167-2738(99)00152-6 ↗
16. Enhanced sintering of yttrium-doped barium zirconate by addition of ZnO10.1111/j.1551-2916.2005.00449.x ↗
17. Cation non-stoichiometry in yttrium-doped barium zirconate: phase behavior, microstructure, and proton conductivity10.1039/c0jm02013c ↗
18. Fabrication and characterization of a tubular ceramic fuel cell based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ proton conducting electrolyte10.1016/j.jpowsour.2016.12.010 ↗
19. Development of a novel proton conducting fuel cell based on a Ni-YSZ support10.1111/jace.15084 ↗
20. A more efficient anode microstructure for SOFCs based on proton conductors10.1016/j.ijhydene.2012.09.027 ↗
21. High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix10.1039/C5TA10670B ↗
22. A novel facile way to synthesize proton-conducting Ba(Ce,Zr,Y)O3 solid solution with improved sinterability and electrical performance10.1016/j.jeurceramsoc.2015.01.012 ↗
23. Y-doped BaCeO3−δ nanopowders as proton-conducting electrolyte materials for ethane fuel cells to co-generate ethylene and electricity10.1016/j.jpowsour.2009.10.069 ↗
24. Fabrication of NiO-Y:BaZrO3 composite anode for thin film-protonic ceramic fuel cells using tape-casting
25. Preparation of Nd-doped BaCeO3 proton-conducting ceramic and its electrical properties in different atmospheres10.1016/S0955-2219(97)00136-2 ↗
26. Sintering studies on 20 mol% yttrium-doped barium cerate10.1111/j.1551-2916.2010.04303.x ↗
27. Stability and conductivity study of the BaCe0.9−xZrxY0.1O2.95 systems10.1016/j.ssi.2006.12.007 ↗
28. Narottam · 2015
29. Effect of Ni diffusion into BaZr0.1Ce0.7Y0.1Yb0.1O3−δ electrolyte during high temperature co-sintering in anode-supported solid oxide fuel cells10.1016/j.ceramint.2017.11.081 ↗
30. Exploring the role of NiO as a sintering aid in BaZr0.1Ce0.7Y0.2O3-δ electrolyte for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2018.07.087 ↗
31. Protonic conduction in Zr-substituted BaCeO310.1016/S0167-2738(00)00777-3 ↗
32. Chemical stability and proton conductivity of doped BaCeO3–BaZrO3 solid solutions10.1016/S0167-2738(99)00196-4 ↗
33. Local environment of Barium, Cerium and Yttrium in BaCe1−xYxO3−δ ceramic protonic conductors10.1016/j.ssi.2007.01.015 ↗
34. Proton conductivity measurements in yttrium barium cerate by impedance spectroscopy10.1111/j.1151-2916.2002.tb00507.x ↗
35. Effect of Ni concentration on phase stability, microstructure and electrical properties of BaCe0.8Y0.2O3-δ - Ni cermet SOFC anode and its application in proton conducting ITSOFC10.1016/j.electacta.2013.12.061 ↗
36. High performance of anode supported BaZr0.1Ce0.7Y0.2O3−δ(BZCY) electrolyte cell for IT-SOFC10.1016/j.ijhydene.2011.07.087 ↗
37. Zirconium doping effect on the performance of proton-conducting BaZryCe0.8−yY0.2O3−δ (0.0≤y≤0.8) for fuel cell applications10.1016/j.jpowsour.2009.03.044 ↗
38. Towards high power density metal supported solid oxide fuel cell for mobile applications10.1149/2.0741802jes ↗
39. Progress in metal-supported solid oxide fuel cells: a review10.1016/j.jpowsour.2010.02.035 ↗
40. Development of high power density metal-supported solid oxide fuel cells10.1002/ente.201700242 ↗
41. Development of Bi-layer metal substrate architectures for suspension plasma sprayed solid oxide fuel cells10.1002/fuce.201700187 ↗
42. Dynamic-temperature operation of metal-supported solid oxide fuel cells10.1016/j.jpowsour.2018.05.094 ↗
43. Ceramic diffusion barrier layers for metal supported SOFCs
44. Electrically conductive diffusion barrier layers for metal-supported SOFC10.1016/j.ssi.2008.03.002 ↗
45. Recent developments in metal-supported solid oxide fuel cells
46. Fabrication and characterization of micro tubular SOFCs for operation in the intermediate temperature10.1016/j.jpowsour.2006.01.037 ↗
47. Progress in microtubular solid oxide fuel cells10.1111/j.1744-7402.2008.02350.x ↗
48. Review of the micro-tubular solid oxide fuel cell Part I. Stack design issues and research activities10.1016/j.jpowsour.2009.02.085 ↗
49. Microtubular solid oxide fuel cells with lanthanum strontium manganite infiltrated cathodes10.1016/j.ijhydene.2015.01.060 ↗
50. Thermo-mechanical stability of multi-scale-architectured thin-film-based solid oxide fuel cells assessed by thermal cycling tests10.1016/j.jpowsour.2013.10.101 ↗
51. A review of anode materials development in solid oxide fuel cells10.1023/B:JMSC.0000034135.52164.6b ↗
52. Microstructure and electrical conductivity of Ni-YSZ cermets for SOFC
53. The influence of pore and Ni morphology on the electrical conductivity of porous Ni/YSZ composite anodes for use in solid oxide fuel cell applications10.1016/j.ssi.2009.02.030 ↗
54. In situ reduction and oxidation of nickel from solid oxide fuel cells in a transmission electron microscope
55. Redox study of anode-supported solid oxide fuel cell10.1016/j.jpowsour.2008.12.118 ↗
56. Process and materials improvements on Ni/Cu-YSZ composites towards nanostructured SOFC anodes: a review
57. Ni-YSZ cermet anode fabricated from NiO-YSZ composite powder for high-performance and durability of solid oxide fuel cells10.1016/j.ssi.2007.06.014 ↗
58. Preparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cells10.1016/j.jpowsour.2003.11.023 ↗
59. Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte10.1016/j.apenergy.2018.10.043 ↗