journal article·2019-09

Thermal behavior of full-scale battery pack based on comprehensive heat-generation model

Kisoo Yoo, Jonghoon Kim

Publisher page

Abstract

Abstract In this study, the heat generation and dissipation terms are classified for both irreversible and reversible heat. The irreversible heat is formulated according to the Joule-heating model with internal resistance in order to circumvent the calculation of electrochemical reactions that require significant computational loads. The internal resistance in the Joule-heating model is determined via electrochemical impedance spectroscopy (EIS). The EIS tests are conducted with state-of-charge (SOC) increments of 5%. To capture rapid changes in the internal resistance, the EIS tests are conducted with smaller intervals in the 0–10% and 90–100% SOC regions. Additionally, an analytical formulation of the resistance is derived from the electrochemical kinetic equations to explain the rapid changes. Analysis reveals that the rapid changes are due to the Li intercalation phenomenon in the electrodes. Thermal analyses are conducted according to the proposed model for Li-ion single cells, and the simulation results exhibits good agreement with the experimental data. Finally, a thermal analysis for a full-scale battery tray comprising 280 cylindrical cells is performed, and the applicability of the proposed model is confirmed by comparing the simulation results with the experimental findings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Lowe · 2010
2. Fabricating high-energy quantum dots in ultra-thin LiFePO 4 nanosheets using a multifunctional high-energy biomolecule—ATP10.1039/C3EE44187C ↗
3. Fabricating high performance lithium-ion batteries using bionanotechnology10.1039/C4NR06815G ↗
4. Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles10.1016/S0378-7753(01)00478-5 ↗
5. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
6. Electrochemical calorimetry10.1149/1.2428687 ↗
7. Heat‐generation rate and general energy balance for insertion battery systems10.1149/1.1837884 ↗
8. Analysis of electrochemical and thermal behavior of Li-ion cells10.1149/1.1526512 ↗
9. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
10. Electrochemical–thermal modeling of automotive Li‐ion batteries and experimental validation using a three‐electrode cell10.1002/er.1652 ↗
11. Electrochemical–thermal analysis of 18650 lithium iron phosphate cell10.1016/j.enconman.2013.05.040 ↗
12. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
13. Thermal modeling of cylindrical lithium ion battery during discharge cycle10.1016/j.enconman.2011.04.013 ↗
14. Three-dimensional thermal modeling of a lithium-ion battery pack10.1016/j.jpowsour.2012.01.081 ↗
15. Thermal modeling of large format lithium-ion cells10.1149/2.042302jes ↗
16. Theoretical modelling methods for thermal management of batteries10.3390/en80910153 ↗
17. Prevent thermal runaway of lithium-ion batteries with minichannel cooling10.1016/j.applthermaleng.2016.08.151 ↗
18. Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling10.1016/j.apenergy.2016.05.122 ↗
19. Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system10.1016/j.apenergy.2017.04.022 ↗
20. Thermal-electrochemical coupled simulations for cell-to-cell imbalances in lithium-iron-phosphate based battery packs10.1016/j.applthermaleng.2017.05.105 ↗
21. Correlating equations for laminar and turbulent free convection from a horizontal cylinder10.1016/0017-9310(75)90222-7 ↗
22. Bejan · 2013
23. Suhas · 1980
24. Modeling of galvanostatic charge and discharge of the lithium polymer insertion cell," (in English)10.1149/1.2221597 ↗
25. Solvent effect of room temperature ionic liquids on electrochemical reactions in lithium-sulfur batteries10.1021/jp400153m ↗
26. Lithium-ion battery electrothermal model, parameter estimation, and simulation environment10.3390/en10030375 ↗
27. A general energy balance for battery systems10.1149/1.2113792 ↗
28. State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge10.1016/j.jpowsour.2008.08.103 ↗
29. Orazem · 2011
30. A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as Li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems10.1016/j.jpowsour.2017.03.042 ↗
31. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
32. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
33. Model-based estimation of reversible heat generation in lithium-ion cells10.1149/2.0281412jes ↗
34. Electrochemical investigations on advanced lithium-ion batteries by three-electrode measurements10.1149/1.1825385 ↗
35. Design optimization of electric vehicle battery cooling plates for thermal performance10.1016/j.jpowsour.2011.06.090 ↗
36. Experimental investigation on EV battery cooling and heating by heat pipes10.1016/j.applthermaleng.2014.09.083 ↗