The porous membrane with tunable performance for vanadium flow battery: The effect of charge
Source abstract
Abstract
Abstract Porous membranes with different charge on the surface and internal pore walls are prepared via the solvent-responsive layer-by-layer (SR-LBL) method. The effect of charge on the transport properties of different ions through the membranes is investigated in detail. The charge property of prepared membranes is tuned by assembling different charged polyelectrolytes (PEs) on the pore walls and the surface of the porous membranes. The results show that in a vanadium flow battery (VFB), the PE layers assembled on the surfaces (including pore walls) are capable to construct excellent ion transport channels to increase proton conductivity and to tune the ion selectivity via Donnan exclusion effect. Compared with the porous membrane with negative charges (7 bilayers), a VFB single cell assembled with a positively charged membrane (7.5 bilayers) yields a higher coulombic efficiency (98%). The water and ion transfer behavior exhibits a similar tendency. In the negative half-cell, the amount of V 3+ gradually increases as cycles proceed and the amount of V 2+ stays at a low and stable level. In the positive half-cell, the amount of VO 2+ decreases; while VO 2 + is accumulated. The imbalance of vanadium ions at both sides induces the discharge capacity fade.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Fuel Cells and Related Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Materials science and Materials Chemistry for large scale electrochemical energy storage: from transportation to electrical grid10.1002/adfm.201200690 ↗
2. Recent progress in redox flow battery research and development10.1002/adfm.201200694 ↗
3. Broad temperature adaptability of vanadium redox flow battery—Part 1: electrolyte research10.1016/j.electacta.2015.11.062 ↗
4. Electrochemical energy storage for green grid10.1021/cr100290v ↗
5. Broad temperature adaptability of vanadium redox flow battery—Part 2: cell research10.1016/j.electacta.2016.01.165 ↗
6. Influences of permeation of vanadium ions through PVDF-g-PSSA membranes on performances of vanadium redox flow batteries10.1021/jp054092w ↗
7. Advanced porous membranes with ultra-high selectivity and stability for vanadium flow batteries10.1039/C5EE02896E ↗
8. Ion exchange membranes for vanadium redox flow battery (VRB) applications10.1039/c0ee00770f ↗
9. A H3PO4 preswelling strategy to enhance the proton conductivity of a H2SO4-doped polybenzimidazole membrane for vanadium flow batteries10.1039/C6RA00831C ↗
10. Coordination-driven in situ self-assembly strategy for the preparation of metal-organic framework hybrid membranes10.1002/anie.201403978 ↗
11. Progress in flow battery research and development10.1149/1.3599565 ↗
12. Membrane development for vanadium redox flow batteries10.1002/cssc.201100068 ↗
13. The use of polybenzimidazole membranes in vanadium redox flow batteries leading to increased coulombic efficiency and cycling performance10.1016/j.electacta.2014.11.185 ↗
14. Modeling of ion transport through a porous separator in vanadium redox flow batteries10.1016/j.jpowsour.2016.07.046 ↗
15. A mechanically robust porous single ion conducting electrolyte membrane fabricated via self-assembly10.1016/j.memsci.2016.02.002 ↗
16. Highly stable anion exchange membranes with internal cross-linking networks10.1002/adfm.201500284 ↗
17. Sulfonated poly(tetramethydiphenyl ether ether ketone) membranes for vanadium redox flow battery application10.1016/j.jpowsour.2010.07.028 ↗
18. Degradation mechanism of sulfonated poly(ether ether ketone) (SPEEK) ion exchange membranes under vanadium flow battery medium10.1039/C4CP03329A ↗
19. Nanofiltration (NF) membranes: the next generation separators for all vanadium redox flow batteries (VRBs)?10.1039/c1ee01117k ↗
20. Composite porous membranes with an ultrathin selective layer for vanadium flow batteries10.1039/C3CC49729A ↗
21. Membranes with well-defined ions transport channels fabricated via solvent-responsive layer-by-layer assembly method for vanadium flow battery10.1038/srep04016 ↗
22. A highly ion-selective zeolite flake layer on porous membranes for flow battery applications10.1002/anie.201510849 ↗
23. Advanced charged sponge-like membrane with ultrahigh stability and selectivity for vanadium flow batteries10.1002/adfm.201503390 ↗
24. Advanced charged membranes with highly symmetric spongy structures for vanadium flow battery application10.1039/c3ee24174b ↗
25. Poly(tetrafluoroethylene) reinforced sulfonated poly(ether ether ketone) membranes for vanadium redox flow battery application10.1016/j.jpowsour.2012.02.047 ↗
26. Silica modified nanofiltration membranes with improved selectivity for redox flow battery application10.1039/C1EE02571F ↗
27. Porous poly(benzimidazole) membrane for all vanadium redox flow battery10.1016/j.jpowsour.2016.02.042 ↗
28. Zeta potential of ion-conductive membranes by streaming current measurements10.1021/la105120f ↗
29. Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes10.1002/adma.201001164 ↗
30. Transport phenomena in nanofluidics10.1103/RevModPhys.80.839 ↗
31. Pre-irradiation grafting of styrene and maleic anhydride onto PVDF membrane and subsequent sulfonation for application in vanadium redox batteries10.1016/j.jpowsour.2007.11.089 ↗
32. Nafion/SiO2 hybrid membrane for vanadium redox flow battery10.1016/j.jpowsour.2007.01.069 ↗
33. Nanoporous polysulfone membranes via a degradable block copolymer precursor for redox flow batteries10.1039/C6TA00698A ↗
34. Self-assembled polyelectrolyte multilayer modified Nafion membrane with suppressed vanadium ion crossover for vanadium redox flow batteries10.1039/b718526j ↗
35. Hydrophilic porous poly(sulfone) membranes modified by UV-initiated polymerization for vanadium flow battery application10.1016/j.memsci.2013.12.015 ↗
36. Anion-conductive membranes with ultralow vanadium permeability and excellent performance in vanadium flow batteries10.1002/cssc.201200561 ↗
37. A dication cross-linked composite anion-exchange membrane for all-vanadium flow battery applications10.1002/cssc.201300560 ↗
38. Capacity decay mechanism of microporous separator-based all-vanadium redox flow batteries and its recovery10.1002/cssc.201300706 ↗
39. Capacity decay and remediation of nafion-based all-vanadium redox flow batteries10.1002/cssc.201200730 ↗