Electrode-supported thin α-alumina separators for lithium-ion batteries
Source abstract
Abstract
Abstract Lithium ion batteries with an inorganic separator offer improved safety and enhanced reliability. The free-standing inorganic separators recently studied for lithium ion batteries are brittle and expensive. To address these issues, this paper reports the synthesis of a new and stable electrode-supported separator using a low-cost ceramic powder. Thin and porous α-Al 2 O 3 separator films of thicknesses down to 40 μm were coated on Li 4 Ti 5 O 12 (LTO) electrode by blade-coating a slurry of α-Al 2 O 3 , water and a small amount of polyvinyl alcohol (PVA). The performance of the LTO/Li cells with coated α-Al 2 O 3 separator improves with decreasing PVA content. Cells with coated α-Al 2 O 3 separator containing 0.4wt% PVA exhibit similar discharge capacity but better rate capability than those with commercial polypropylene (PP) or thick sintered α-Al 2 O 3 separator. The coated α-Al 2 O 3 separator does not react with LTO even after many charge/discharge cycles. Fabrication of the electrode-supported α-Al 2 O 3 separator is scalable and cost-effective, offering high potential for practical application in industrial lithium ion battery manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Pistoia · 2014
2. Fletcher · 2011
3. Rechargeable lithium batteries and beyond: progress, challenges, and future directions10.1557/mrs.2014.62 ↗
4. Electrochemical energy storage for green grid10.1021/cr100290v ↗
5. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
6. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
7. Challenges facing lithium batteries and electrical double-layer capacitors10.1002/anie.201201429 ↗
8. Jow · 2014
9. Next-generation lithium-ion batteries: the promise of near-term advancements10.1557/mrs.2014.84 ↗
10. Lithium batteries and cathode materials10.1021/cr020731c ↗
11. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
12. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
13. Battery separators10.1021/cr020738u ↗
14. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
15. A review on the separators of liquid electrolyte Li-ion batteries10.1016/j.jpowsour.2006.10.065 ↗
16. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
17. Lithium ion battery separators: development and performance characterization of a composite membrane10.1016/j.memsci.2012.09.027 ↗
18. Poly(vinylidene fluoride)/SiO2 composite membranes prepared by electrospinning and their excellent properties for nonwoven separators for lithium-ion batteries10.1016/j.jpowsour.2013.11.079 ↗
19. Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery10.1038/srep03935 ↗
20. Preparation of a trilayer separator and its application to lithium-ion batteries10.1016/j.jpowsour.2010.07.016 ↗
21. Synthesis of an Al2O3-coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries10.1016/j.jpowsour.2013.10.056 ↗
22. The functional separator coated with core–shell structured silica–poly(methyl methacrylate) sub-microspheres for lithium-ion batteries10.1016/j.memsci.2014.09.047 ↗
23. An inorganic membrane as a separator for lithium-ion battery10.1016/j.jpowsour.2011.06.055 ↗
24. Porous SiO2 as a separator to improve the electrochemical performance of spinel LiMn2O4 cathode10.1016/j.memsci.2013.08.028 ↗
25. Performance of through-hole anodic aluminum oxide membrane as a separator for lithium-ion battery10.1016/j.memsci.2014.03.005 ↗
26. Pure inorganic separator for lithium ion batteries10.1021/am507145h ↗
27. A non-destructive technique for measuring ceramic porosity using liquid nitrogen10.1016/j.jas.2004.03.020 ↗
28. Three-dimensional modeling of electrochemical performance and heat generation of lithium-ion batteries in tabbed planar configurations10.1149/1.3591799 ↗
29. ASTM International, Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels, D823−95 (Reapproved 2012), 100 Barr Harbo Dr., West Conshohocken, PA.
30. Polypropylene-supported and nano-Al2O3 doped poly(ethylene oxide)–poly(vinylidene fluoride-hexafluoropropylene)-based gel electrolyte for lithium ion batteries10.1016/j.jpowsour.2010.10.062 ↗