journal article·2016-01Open access

High-performance solid oxide fuel cells based on a thin La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte membrane supported by a nickel-based anode of unique architecture

Haibin Sun, Yu Chen, Fanglin Chen, Yujun Zhang, Meilin Liu

Abstract

Abstract Solid oxide fuel cells (SOFCs) based on a thin La0.8Sr0.2Ga0.8Mg0.2O3−δ (LSGM) electrolyte membrane supported by a nickel-based anode often suffers from undesirable reaction/diffusion between the Ni anode and the LSGM during high-temperature co-firing. In this study, a high performance intermediate-temperature SOFC is fabricated by depositing thin LSGM electrolyte membranes on a LSGM backbone of unique architecture coated with nano-sized Ni and Gd0.1Ce0.9O2−δ (GDC) particles via a combination of freeze-drying tape-casting, slurry drop-coating, and solution infiltration. The thickness of the dense LSGM electrolyte membranes is ∼30 μm while the undesirable reaction/diffusion between Ni and LSGM are effectively hindered because of the relatively low firing temperature, as confirmed by XRD analysis. Single cells show peak power densities of 1.61 W cm−2 at 700 °C and 0.52 W cm−2 at 600 °C using 3 vol% humidified H2 as fuel and ambient air as oxidant. The cell performance is very stable for 115 h at a constant current density of 0.303 A cm−2 at 600 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
2. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
3. Rational SOFC material design: new advances and tools10.1016/S1369-7021(11)70279-6 ↗
4. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2−xYbxO3−δ10.1126/science.1174811 ↗
5. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
6. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells10.1038/ncomms1359 ↗
7. Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500° C10.1016/S0167-2738(99)00319-7 ↗
8. Generation of charge carriers and an H/D isotope effect in proton-conducting doped barium cerate ceramics10.1039/jm9910100441 ↗
9. Doped LaGaO3 perovskite type oxide as a new oxide ionic conductor10.1021/ja00088a016 ↗
10. Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells10.1039/C5TA01203A ↗
11. Electrical properties of ceria-based oxides and their application to solid oxide fuel cells10.1016/0167-2738(92)90102-U ↗
12. Synthesis of strontium and barium cerate and their reaction with carbon dioxide10.1016/0167-2738(93)90338-4 ↗
13. Stability of BaCeO3-based proton conductors in water-containing atmospheres10.1149/1.1391888 ↗
14. Oxygen surface exchange and diffusion in the new perovskite oxide ion conductor LaGaO310.1021/ja964128l ↗
15. A high-performance anode-supported SOFC with LDC-LSGM bilayer electrolytes10.1149/1.1667016 ↗
16. Co-firing of anode-supported SOFCs with thin La0.9Sr0.1Ga0.8Mg0.2O3−δ electrolytes10.1149/1.2191132 ↗
17. High performance anode-supported intermediate temperature solid oxide fuel cells (IT-SOFCs) with La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte films prepared by electrophoretic deposition10.1016/j.elecom.2009.06.029 ↗
18. Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process10.1016/j.jpowsour.2012.03.109 ↗
19. Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network10.1016/j.nanoen.2014.05.010 ↗
20. Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film10.1021/am5003662 ↗
21. High performance low temperature solid oxide fuel cells with novel electrode architecture10.1039/c2ra21921b ↗
22. Direct-methane solid oxide fuel cells with hierarchically porous Ni-based anode deposited with nanocatalyst layer10.1016/j.nanoen.2014.08.016 ↗
23. High-performance, ceria-based solid oxide fuel cells fabricated at low temperatures10.1016/j.jpowsour.2013.04.130 ↗
24. Preparation of Ni-Fe bimetallic porous anode support for solid oxide fuel cells using LaGaO3 based electrolyte film with high power density10.1016/j.jpowsour.2010.04.068 ↗
25. A reduced temperature solid oxide fuel cell with nanostructured anodes10.1039/c1ee01982a ↗
26. Performance enhancement of Ni-YSZ electrode by impregnation of Mo0.1Ce0.9O2+δ10.1016/j.jpowsour.2012.01.019 ↗