journal article·2008-03

Electrical properties of Al-doped oxyapatites at intermediate temperature

Sami Chefi, Adel Madani, Hedi Boussetta, Claude Roux, Abdelkader Hammou

Journal of Power Sources· Volume 177· Issue 2
Publisher page

Abstract

Abstract In order to obtain acceptable performances in SOFC, relatively high operating temperatures (∼850–1000 °C) are required. That is mainly due to the low ionic conductivity of YSZ electrolyte. These temperature conditions are at the origin of the cell degradation, which justify the search for alternative electrolytes presenting the same performances but at lower temperature (∼800 °C). It is in this context that the oxyapatites of general formula La 10− x Si 6− y Al y O 27−3 x /2− y /2 ( x = 0, 0.67; y = 0.25, 0.50, 0.75) are studied in this work. The solid solutions are prepared by sintering the oxide powders at 1600 °C. All samples have shown a hexagonal structure with an increase in the cell parameters with the aluminium content. Electrical properties are determined by impedance spectroscopy between 169 and 790 °C. The results are treated by separating the bulk and grain boundary conductivities between 169 and 500 °C and in the form of total (bulk + grain boundary) conductivity between 500 and 790 °C. The respective influences of the activation energy and the pre-exponential factor on conductivity are analyzed. Activation energies are about 0.65 eV suggesting an interstitial mechanism. No variation of conductivity is observed with the oxygen partial pressure. Finally, La 10 Si 5.5 Al 0.5 O 26.75 shows conductivity higher than that of YSZ at intermediate temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Kharton · Solid State Ionics · 2004 · 174 · 13510.1016/j.ssi.2004.06.015 ↗
2. Badwal · Mater. Forum · 1997 · 21 · 187
3. Kharton · Electrochim. Acta. · 2003 · 48 · 181710.1016/S0013-4686(03)00247-0 ↗
4. Nakayama · J. Eur. Ceram. Soc. · 1998 · 18 · 141310.1016/S0955-2219(98)00032-6 ↗
5. Sansom · Solid State Ionics · 2004 · 167 · 2310.1016/j.ssi.2003.12.015 ↗
6. Shaula · J. Solid State Chem. · 2005 · 178 · 205010.1016/j.jssc.2005.04.018 ↗
7. Sansom · Solid State Ionics · 2001 · 139 · 20510.1016/S0167-2738(00)00835-3 ↗
8. Abram · J. Mater. Chem. · 2001 · 11 · 197810.1039/b104006p ↗
9. Slater · Solid State Phenom. · 2003 · 195 · 90
10. Yoshioka · Solid State Ionics · 2005 · 176 · 239510.1016/j.ssi.2005.06.026 ↗
11. A. Vincent, Thesis 2006, Tours University, France.
12. Derek, J Zview, I. Scribner Associates Editor, 2005.
13. Deportes · 1994
14. Maier · J. Eur. Ceram. Soc. · 2004 · 24 · 125110.1016/S0955-2219(03)00507-7 ↗
15. Carter · 1968 · 125
16. Madani · Sens. Actuators B · 2005 · 109 · 10710.1016/j.snb.2005.03.005 ↗
17. Kharton · Electrochim. Acta. · 2001 · 46 · 287910.1016/S0013-4686(01)00505-9 ↗
18. Chu · J. Solid State Chem. · 1978 · 23 · 29710.1016/0022-4596(78)90078-6 ↗
19. Bauerle · J. Phys. Chem. Solids · 1969 · 30 · 265710.1016/0022-3697(69)90039-0 ↗
20. Tien · J. Appl. Phys. · 1964 · 35 · 12210.1063/1.1713017 ↗
21. Alcock · 1968 · 109
22. Najib · Dalton Trans. · 2004 · 19 · 310610.1039/b401273a ↗
23. Reina · Solid State Ionics · 2006 · 177 · 130710.1016/j.ssi.2006.05.034 ↗
24. Tao · Mater. Res. Bull. · 2001 · 36 · 124510.1016/S0025-5408(01)00625-0 ↗
25. Tolchard · J. Mater. Chem. · 2003 · 13 · 195610.1039/b302748c ↗
26. Kharton · J. Electrochem. Soc. · 2004 · 151 · 123610.1149/1.1768948 ↗
27. Nakayama · Solid State Ionics · 2004 · 170 · 21910.1016/j.ssi.2004.02.023 ↗
28. Islam · Chem. Commun. · 2003 · 148610.1039/b301179h ↗
29. Takeda · Sens Actuators B · 2006 · 115 · 45510.1016/j.snb.2005.10.009 ↗
30. Lucazeau · J. Raman Spectrosc. · 2007 · 38 · 2110.1002/jrs.1569 ↗