journal article·2005-01

Effects of interstitial solute atoms on the very low strain-rate deformations for an IF steel and an ultra-low carbon steel

N. Tsuchida, E. Baba, K. Nagai, Y. Tomota

Acta Materialia· Volume 53· Issue 2
Publisher page

Abstract

Abstract In order to investigate the effects of interstitial solute atoms on very low strain-rate deformation of steel by using an interstitial free (IF) steel and an ultra-low carbon (ULC) steel, creep tests and crosshead-arresting tests were conducted at room temperature. The concentrations of solute carbon and solute nitrogen for the ULC steel were 8 and 12 ppm, respectively, and were about 20 times higher than those of the IF steel. The static tensile tests showed that the tensile properties in the two steels were quite similar. However, the room temperature creep test and the crosshead-arresting test showed that their deformation behaviors were significantly different. The very low strain-rate deformation of the ULC steel was associated with the so-called dynamic strain aging, which appeared at a critical strain rate of 5.8 × 10 −8 s −1 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Tsuchida · ISIJ Int · 2000 · 40 · 8410.2355/isijinternational.40.84 ↗
2. Tsuchida · Acta Mater · 2001 · 49 · 302910.1016/S1359-6454(01)00197-5 ↗
3. Tsuchida · ISIJ Int · 2004 · 44 · 20910.2355/isijinternational.44.209 ↗
4. Abe · J Jpn Inst Met · 1981 · 45 · 94210.2320/jinstmet1952.45.9_942 ↗
5. Abe · Scand J Metal · 1984 · 13 · 276
6. Keh · 1968
7. Takeyama · Tetsu to Hagane · 1972 · 58 · 105410.2355/tetsutohagane1955.58.8_1054 ↗
8. Moriya · ISIJ Int · 1997 · 37 · 101610.2355/isijinternational.37.1016 ↗
9. Tomota · Acta Mater · 2003 · 51 · 81910.1016/S1359-6454(02)00473-1 ↗
10. Dijkstra · Trans. AIME · 1949 · 185 · 252
11. ASTM E139-70. ASTM E150-64
12. Testing plan and testing procedures for nrim creep data sheets project. NRIM Material Strength Data Sheet. Technical Document No. 10 NRIM; 1996
13. Tendo · Tetsu to Hagane · 1993 · 79 · 9810.2355/tetsutohagane1955.79.1_98 ↗