High-performance polymer electrolyte membrane fuel cells with nanoporous carbon nanotube layer in low humidity condition
Source abstract
Abstract
Carbon nanotubes (CNT) based nanoporous layer contacting the catalyst layer in polymer electrolyte membrane fuel cells (PEMFCs) is investigated. Nanoporous CNT-5, CNT-15, and CNT-40 sheets are prepared via direct spinning method with thicknesses is 5, 15, and 40 μm, respectively. The ethanol-derived CNT-5 possess sparse pore networks, whereas CNT-15 and CNT-40 derived from acetone exhibit fine networks, and CNT-15 and CNT-40 differ only in thickness. The CNTs are employed as either standalone nanoporous layer or as an additional layer with carbon-black microporous layer (MPL). Scanning electron microscopy and sessile drop method are utilized for CNT characterization. Current-voltage polarization curve and electrochemical impedance spectroscopy are recorded for the PEMFC characterization. The best performance is obtained when CNT-15 is adopted as an additional nanoporous layer with MPL in the dry operation. The current densities at a cell voltage of 0.6 V are 0.454 and 0.743 A cm −2 in dry and wet operations, respectively, corresponding to an increase of 28.5% and 57.1%, respectively, compared to carbon-black MPL. Enhancements in water management and reaction kinetics lead to this performance increase. In particular, the enhanced water storage and expulsion are benefits differentiated from employing CNT as the single nanoporous layer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Unveiling water drainage through microporous layer with laser-ablated open furrows in proton exchange membrane fuel cells10.1016/j.jpowsour.2021.229563 ↗
2. Application of porous materials for the flow field in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.229664 ↗
3. Microarchitecture of polyvinylidene fluoride-bound self-standing microporous layer and its implication to water management in fuel cells10.1016/j.jpowsour.2021.230129 ↗
4. Influence of the microporous layer on carbon corrosion in the catalyst layer of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2012.04.086 ↗
5. Electrochemical impedance spectroscopy of catalyst and carbon degradations in proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226922 ↗
6. Design of gradient cathode catalyst layer (CCL) structure for mitigating Pt degradation in proton exchange membrane fuel cells (PEMFCs) using mathematical method
7. Gas diffusion layer modifications and treatments for improving the performance of proton exchange membrane fuel cells and electrolysers: a review10.1016/j.ijhydene.2017.09.132 ↗
8. Effective transport properties for polymer electrolyte membrane fuel cells - with a focus on the gas diffusion layer10.1016/j.pecs.2012.07.002 ↗
9. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
10. A crack-free and super-hydrophobic cathode micro-porous layer for direct methanol fuel cells10.1016/j.apenergy.2014.10.044 ↗
11. Non-isothermal two-phase transport in a polymer electrolyte membrane fuel cell with crack-free microporous layers10.1016/j.ijheatmasstransfer.2016.11.045 ↗
12. Multiwall carbon nanotubes tailored porous carbon fiber paper-based gas diffusion layer performance in polymer electrolyte membrane fuel cell10.1016/j.renene.2019.04.096 ↗
13. Investigation of porous carbon and carbon nanotube layer for proton exchange membrane fuel cells10.1016/j.apenergy.2012.08.045 ↗
14. Benefits of using carbon nanotubes in fuel cells: a review10.1002/er.3600 ↗
15. Carbon nanotube free-standing membrane as gas diffusion layer in hydrogen fuel cells10.1049/mnl:20065030 ↗
16. Enhanced performance of proton exchange membrane fuel cell by introducing nitrogen-doped CNTs in both catalyst layer and gas diffusion layer10.1016/j.electacta.2017.08.160 ↗
17. Carbon nanotubes grown in situ on carbon paper as a microporous layer for proton exchange membrane fuel cells10.1016/j.ijhydene.2015.04.129 ↗
18. An ultra-thin, flexible, low-cost and scalable gas diffusion layer composed of carbon nanotubes for high-performance fuel cells10.1039/C9TA13944C ↗
19. Carbon nanotubes as support for cathode catalyst of a direct methanol fuel cell [3]10.1016/S0008-6223(02)00039-8 ↗
20. Nanoscale morphological investigation into surface coverage of platinum catalysts by ionomers on vertically aligned carbon nanotube fuel cell catalyst layers10.1016/j.jpowsour.2020.227953 ↗
21. Carbon nanotube sheet as a microporous layer for proton exchange membrane fuel cells10.1016/j.energy.2021.120459 ↗
22. Proton exchange membranes for fuel cell operation at low relative humidity and intermediate temperature: an updated review10.1016/j.coelec.2017.10.020 ↗
23. Uncovering Nafion-multiwalled carbon nanotube hybrid membrane for prospective polymer electrolyte membrane fuel cell under low humidity10.1016/j.memsci.2018.05.051 ↗
24. Enhanced proton conductivity of sulfonated polysulfone membranes under low humidity via the incorporation of multifunctional graphene oxide10.1021/acsanm.9b00446 ↗
25. Targeted filling of silica in Nafion by a modified: in situ sol-gel method for enhanced fuel cell performance at elevated temperatures and low humidity10.1039/C9CC01221D ↗
26. Non-destructive fabrication of Nafion/silica composite membrane via swelling-filling modification strategy for high temperature and low humidity PEM fuel cell10.1016/j.renene.2020.02.056 ↗
27. Amine functionalized carbon nanotube (ACNT) filled in sulfonated poly(ether ether ketone) membrane: effects of ACNT in improving polymer electrolyte fuel cell performance under reduced relative humidity10.1016/j.compositesb.2020.107890 ↗
28. High proton conductivity dual modified ionic crosslink membrane for fuel cell application at low humidity condition with molecular dynamics simulations10.1016/j.renene.2020.06.026 ↗
29. Patterned mesoporous TiO2 microplates embedded in Nafion® membrane for high temperature/low relative humidity polymer electrolyte membrane fuel cell operation10.1016/j.renene.2021.08.062 ↗
30. Enhanced low-humidity performance in a proton exchange membrane fuel cell by developing a novel hydrophilic gas diffusion layer10.1016/j.ijhydene.2019.10.160 ↗
31. Investigation of the effect of carbon-covering layer on catalyst layer in polymer electrolyte membrane fuel cell in low relative humidity condition
32. Hydrophilic-hydrophobic dual catalyst layers for proton exchange membrane fuel cells under low humidity10.1016/j.elecom.2018.11.003 ↗
33. Effects of surfactant on carbon nanotube assembly synthesized by direct spinning10.1016/j.ces.2013.09.008 ↗
34. R N · 2018
35. Cathode starvation as an accelerated conditioning procedure for perfluorosulfonic acid ionomer fuel cells
36. Activation mechanisms in the catalyst coated membrane of PEM fuel cells10.1016/j.pecs.2021.100924 ↗
37. Carbon nanotube wires for high-temperature performance10.1016/j.carbon.2013.07.067 ↗
38. Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment10.1016/j.cplett.2004.09.024 ↗
39. Microstructure effects on effective gas diffusion coefficient of nanoporous materials
40. Defect density in multiwalled carbon nanotubes influences ovalbumin adsorption and promotes macrophage activation and CD4+ T-cell proliferation10.2147/IJN.S111029 ↗
41. Study on dispersion and characterization of functionalized mwcnts prepared by wet oxidation
42. Superior performance nanocomposites from uniformly dispersed octadecylamine functionalized multi-walled carbon nanotubes
43. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2008.06.006 ↗
44. Experimental measurement of stress and strain in nafion membrane during hydration cycles10.1149/2.065202jes ↗
45. Asymptotic analysis for the inlet relative humidity effects on the performance of proton exchange membrane fuel cell10.1016/j.apenergy.2017.11.008 ↗
46. Effects of humidity and temperature on a proton exchange membrane fuel cell (PEMFC) stack10.1016/j.jiec.2008.01.007 ↗
47. High proton conductivity dual modified ionic crosslink membrane for fuel cell application at low humidity condition with molecular dynamics simulations10.1016/j.renene.2020.06.026 ↗
48. Proton exchange membranes for fuel cell operation at low relative humidity and intermediate temperature: an updated review10.1016/j.coelec.2017.10.020 ↗
49. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
50. Optimizing the mass-transfer efficiency of a microporous layer for high-performance proton exchange membrane fuel cells10.1021/acs.jpcc.1c03626 ↗
51. Main cell components, material properties, and processes
52. Study of the electrochemical behaviour of a 300 W PEM fuel cell stack by Electrochemical Impedance Spectroscopy
53. O'Hayre · 2016
54. Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC10.1016/j.ijhydene.2011.04.038 ↗
55. Effects of pore size gradient in the substrate of a gas diffusion layer on the performance of a proton exchange membrane fuel cell10.1016/j.apenergy.2015.03.072 ↗
56. Selection of representative volume elements for pore-scale analysis of transport in fuel cell materials10.1016/j.jpowsour.2011.09.035 ↗
57. Microstructural pore analysis of the catalyst layer in a polymer electrolyte membrane fuel cell: a combination of resin pore-filling and FIB/SEM10.1016/j.ijhydene.2015.09.080 ↗
58. Direct three-dimensional reconstruction of a nanoporous catalyst layer for a polymer electrolyte fuel cell10.1016/j.jpowsour.2010.09.044 ↗
59. Direct spinning of CNT fibres: past, present and future scale up10.1016/j.carbon.2019.05.024 ↗
60. An approach to modeling two-phase transport in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2007.09.029 ↗
61. Effect of capillary pressure on liquid water removal in the cathode gas diffusion layer of a polymer electrolyte fuel cell10.1016/j.jpowsour.2008.03.056 ↗
62. Water flow in the gas diffusion layer of PEM fuel cells10.1016/j.memsci.2005.03.049 ↗
63. Resistance separation of polymer electrolyte membrane fuel cell by polarization curve and electrochemical impedance spectroscopy
64. Effect of SO[sub 2] on the performance of the cathode of a PEM fuel cell at 0.5–0.7 V10.1149/1.3236650 ↗
65. Microporous layer for water morphology control in PEMFC10.1016/j.ijheatmasstransfer.2009.01.002 ↗
66. Effect of anode and cathode reletive humidity variance and pressure gradient on single cell PEMFC performance10.1109/ECCE.2018.8558474 ↗