journal article·2022-05Open access

Performance comparison of composite cathode: Mixed ionic and electronic conductor and triple ionic and electronic conductor with BaZr0.1Ce0.7Y0.1Yb0.1O3-δ for highly efficient protonic ceramic fuel cells

Arim Seong, Donghwi Jeong, Minseo Kim, Sihyuk Choi, Guntae Kim

Abstract

Rapid oxygen (O2-) electroreduction rate and high electrochemical activity towards proton (H+) and electron (e(-)) are required properties of cathode for highly efficient protonic ceramic fuel cells (PCFCs). Herein, we investigate the effect of composite cathodes on electrochemical performance under PCFC operating conditions. To introduce protonic properties in cathodes, the proton-conducting oxide (PCO), BaZr0.1Ce0.7Y0.1Yb0.1O3-delta (BZCYYb) is blended with (i) Sm0.5Sr0.5CoO3-delta (SSC) as a mixed ionic and electronic conductor (MIEC) and (ii) PrBa0.5Sr0.5Co1.5Fe0.5O5+delta (PBSCF) as a triple ionic and electronic conductor (TIEC). Interestingly, the peak power density (PPD) ratio of SSC-BZCYYb/SSC shows over 200% enhancement, whereas the PPD ratio of PBSCF-BZCYYb/PBSCF is attained only 95.3% at 500 ?. Such a difference can be attributed to the extended H2O (gas) formation site of SSC-BZCYYb, which reduces the non-charge transfer resistance (R-3) of SSC-BZCYYb as measured by impedance spectra and fitting analysis. On the other hand, the composite effect of PBSCF-BZCYYb is relatively insignificant because of the sufficient proton uptake properties of PBSCF. In sum, the composite strategy is a more effective way to improve the performance of MIEC cathode than TIEC cathode at typical PCFC operating temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Soft but significant power in the Paris agreement10.1038/nclimate3006 ↗
2. Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells10.1038/nmat4166 ↗
3. Chemically stable perovskites as cathode materials for solid oxide fuel cells: La-doped Ba0.5Sr0.5Co0.8Fe0.2O3−δ10.1002/cssc.201301401 ↗
4. Correlation between fast oxygen kinetics and enhanced performance in Fe doped layered perovskite cathodes for solid oxide fuel cells10.1039/C5TA02158H ↗
5. A highly efficient and robust nanofiber cathode for solid oxide fuel cells
6. The effect of A-site and B-site substitution on BaFeO3−δ: an investigation as a cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2015.08.016 ↗
7. From material design to mechanism study: nanoscale Ni exsolution on a highly active A-site deficient anode material for solid oxide fuel cells10.1016/j.nanoen.2016.07.013 ↗
8. Influence of cathode porosity on high-performance protonic ceramic fuel cells with PrBa0.5Sr0.5Co1.5Fe0.5O5-δ cathode10.1149/2.0821813jes ↗
9. Triple-conducting layered perovskites as cathode materials for proton-conducting solid oxide fuel cells10.1002/cssc.201402351 ↗
10. A highly efficient composite cathode for proton-conducting solid oxide fuel cells10.1016/j.jpowsour.2020.227812 ↗
11. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
12. Promotion of oxygen reduction reaction on a double perovskite electrode by a water-induced surface modification10.1039/D0EE03283B ↗
13. Self-assembled triple-conducting nanocomposite as a superior protonic ceramic fuel cell cathode10.1016/j.joule.2019.07.004 ↗
14. Proton conductivity in mixed-conducting BSFZ perovskite from thermogravimetric relaxation10.1039/C4CP00459K ↗
15. Oxides with mixed protonic and electronic conductivity10.1146/annurev-matsci-091819-010219 ↗
16. Production of La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with graded porosity for improving proton-conducting solid oxide fuel cells10.1016/j.ceramint.2019.07.270 ↗
17. Cathodic polarization of strontium-doped lanthanum ferrite in proton-conducting solid oxide fuel cell10.1016/j.ssi.2004.08.008 ↗
18. Triple ionic–electronic conducting oxides for next-generation electrochemical devices10.1038/s41563-020-00854-8 ↗
19. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
20. Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells10.1038/s41560-017-0085-9 ↗
21. Performance comparison of perovskite composite cathodes with BaZr0.1Ce0.7Y0.1Yb0.1O3–δ in anode-supported protonic ceramic fuel cells10.1149/1945-7111/abab26 ↗
22. Sm0.5Sr0.5CoO3–δ–BaCe0.8Sm0.2O3–δ composite cathodes for proton-conducting solid oxide fuel cells10.1016/j.ssi.2007.12.005 ↗
23. High performing BaCe0.8Zr0.1Y0.1O3–δ–Sm0.5Sr0.5CoO3–δ based protonic ceramic fuel cell10.1016/j.jpowsour.2017.06.089 ↗
24. Electrochemical properties of PSFC–BCYb composites as cathodes for proton conducting solid oxide fuel cells10.1002/fuce.201000090 ↗
25. Proton-conducting ceramic fuel cells: Scale up and stack integration10.1016/j.jpowsour.2020.228868 ↗
26. Study of oxygen ion transport in acceptor doped samarium cobalt oxide10.1007/BF02426008 ↗
27. Sm0.5Sr0.5CoO3 cathode material from glycine-nitrate process: formation, characterization, and application in LaGaO3-based solid oxide fuel cells10.1016/j.jallcom.2006.10.147 ↗
28. Hybrid-solid oxide electrolysis cell: a new strategy for efficient hydrogen production10.1016/j.nanoen.2017.11.074 ↗
29. Transport properties and in-situ Raman spectroscopy study of BaCe 0.9Y0.1O3-δ as a function of water partial pressures10.1016/j.ssi.2011.03.020 ↗
30. Mechanisms and rate laws for oxygen exchange on mixed-conducting oxide surfaces10.1016/j.jcat.2006.09.019 ↗
31. Hydration properties and rate determining steps of the oxygen reduction reaction of perovskite-related oxides as H+-SOFC cathodes10.1149/2.101205jes ↗
32. Proton uptake into the protonic cathode material BaCo0.4Fe0.4Zr0.2O3-δ and comparison to protonic electrolyte materials10.1016/j.ssi.2016.09.012 ↗
33. Mixed-conducting perovskites as cathode materials for protonic ceramic fuel cells: understanding the trends in proton uptake10.1002/adfm.201801241 ↗