journal article·2022-03

Modulating superlattice structure and cyclic stability of Ce2Ni7-type LaY2Ni10.5-based alloys by Mn, Al, and Zr substitutions

Shiqian Zhao, Hui Wang, Lichun Yang, Jiangwen Liu, Liuzhang Ouyang, Min Zhu

Publisher page

Abstract

It is a great challenge to achieve high capacity and long cyclic life for hydrogen storage electrode alloys in Ni-MH batteries, especially for superlattice alloys. This work investigates three series of single-phase LaY 2Ni 10.5-based alloys to tune the Ce 2Ni 7 -type superlattice structure and electrochemical hydrogen storage properties by Mn, Al, and Zr substitutions. The Mn, Al substitutions for Ni could reduce the volume difference between [A 2B 4] and [AB 5] subunits, thus greatly improving the cyclic performance. The maximum discharge capacity for the LaY 2Ni 9.7Mn 0.5Al 0.3 alloy is 384.1 mAh g −1, and the capacity retention S 200 is as high as 76.1%. However, the partial replacement of Y with Zr dramatically reduces the discharge capacity and cyclic stability, although the subunit volume difference is even zero in the LaY 1.75Zr 0.25Ni 9.7Mn 0.5Al 0.3 alloy. Detailed structural analysis shows that LaY 1.75Zr 0.25Ni 9.7Mn 0.5Al 0.3 alloy exhibits greater a-axis expansion (Δ a/ a = 4.52%) and cell volume change (Δ c/ c = 15.46%) during charging than the Mn, Al-substituted alloys. The unusual expansion at the basal plane of [A 2B 4] and [AB 5 ] subunits should be responsible for a considerable lattice strain (1.42%) and poor cyclic performance in the Zr-substituted alloys. This work provides new insights into the design of high capacity and long-life superlattice electrode alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Building better batteries: researchers must find a sustainable way of providing the power our modern lifestyles demand10.1038/451652a ↗
2. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
3. Functional materials for rechargeable batteries10.1002/adma.201003587 ↗
4. Advanced hydrogen storage alloys for Ni/MH rechargeable batteries10.1039/C0JM01921F ↗
5. Progress of hydrogen storage alloys for Ni-MH rechargeable power batteries in electric vehicles: a review10.1016/j.matchemphys.2017.07.002 ↗
6. Waste plastic triboelectric nanogenerators using recycled plastic bags for power generation10.1021/acsami.0c16489 ↗
7. Integrated energy storage system based on triboelectric nanogenerator in electronic devices10.1007/s11705-020-1956-3 ↗
8. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
9. Development of the cyclic life model of Ni-MH power batteries for hybrid electric vehicles based on real-world operating conditions10.1016/j.est.2020.101999 ↗
10. Comparison of comprehensive properties of Ni-MH (nickel-metal hydride) and Li-ion (lithium-ion) batteries in terms of energy efficiency10.1016/j.energy.2014.04.038 ↗
11. Influence of Sm doping on thermodynamics and electrochemical performance of AB5+z alloys in low-temperature and high-power Ni-metal hydride batteries10.1016/j.jpowsour.2021.229725 ↗
12. The current status of hydrogen storage alloy development for electrochemical applications10.3390/ma6104574 ↗
13. Phase structures and electrochemical properties of La–Mg–Ni-based hydrogen storage alloys with superlattice structure10.1016/j.ijhydene.2016.08.149 ↗
14. Rare earth–Mg–Ni-based hydrogen storage alloys as negative electrode materials for Ni/MH batteries10.1016/j.jallcom.2010.08.157 ↗
15. Development of high-capacity nickel-metal hydride batteries using superlattice hydrogen-absorbing alloys10.1016/j.jpowsour.2005.05.054 ↗
16. Cobalt-free nickel–metal hydride battery for industrial applications10.1016/j.jallcom.2013.01.092 ↗
17. Hydrogen Production via hydrolysis and alcoholysis of light metal-based materials: a Review10.1007/s40820-021-00657-9 ↗
18. Synergy between metallic components of MoNi alloy for catalyzing highly efficient hydrogen storage of MgH210.1007/s12274-020-2808-7 ↗
19. Highly active multivalent multielement catalysts derived from hierarchical porous TiNb2O7 nanospheres for the reversible hydrogen storage of MgH210.1007/s12274-020-3058-4 ↗
20. Degradation mechanism of the La-Mg-Ni-based metal hydride electrode La0.7Mg0.3Ni3.4Mn0.110.1149/1.1904943 ↗
21. New ternary intermetallic compounds belonging to the R–Y–Ni (R = La, Ce) system as negative electrodes for Ni-MH batteries10.1016/S0925-8388(01)01486-4 ↗
22. The microstructure and electrochemical properties of Mn-doped La–Y–Ni-based metal-hydride electrode materials10.1016/j.electacta.2018.11.015 ↗
23. H. Yan, W. Xiong, L. Wang, B. Li, J. Li, Rare Earth Based Hydrogen Storage Alloy and Application Thereof, United States Patent, (2020) US10566614.
24. Investigations on AB3-, A2B7- and A5B19-type La–Y–Ni system hydrogen storage alloys10.1016/j.ijhydene.2016.09.049 ↗
25. Characteristics of A2B7-type La–Y–Ni-based hydrogen storage alloys modified by partially substituting Ni with Mn10.1016/j.ijhydene.2017.01.080 ↗
26. Effect of Al content on the structural and electrochemical properties of A2B7 type La–Y–Ni based hydrogen storage alloy10.1016/j.ijhydene.2020.04.136 ↗
27. Annealing temperature on structural and electrochemical property of Mg-free La–Y–Ni based A2B7-type hydrogen storage alloys
28. A2B7 type La–Y–Ni hydrogen storage alloy with Mn and Al substitution
29. Effect of Y element on cyclic stability of A2B7-type La–Y–Ni-based hydrogen storage alloy10.1016/j.ijhydene.2019.06.081 ↗
30. Structural properties of two deuterides LaY2Ni9D12.8 and CeY2Ni9D7.7 determined by neutron powder diffraction and X-ray absorption spectroscopy10.1016/j.jssc.2004.03.034 ↗
31. Phase transformation and hydrogen storage properties of LaY2Ni10.5 superlattice alloy with single Gd2Co7-type or Ce2Ni7-type structure10.1016/j.jallcom.2021.159254 ↗
32. Effect of Sm on the cyclic stability of La–Y–Ni-based alloys and their comparison with RE–Mg–Ni-based hydrogen storage alloy10.1016/j.ijhydene.2020.11.195 ↗
33. Relevance of hydrogen storage properties of ANi3 intermetallics (A = La, Ce, Y) to the ANi2 subunits in their crystal structures10.1016/j.actamat.2008.07.026 ↗
34. Improvement of reversible H storage capacity by fine tuning of the composition in the pseudo-binary systems A2-xLaxNi7 (A = Gd, Sm, Y, Mg)10.1016/j.jallcom.2020.157008 ↗
35. Subunit volume control mechanism for dehydrogenation performance of AB3-type superlattice intermetallics10.1016/j.jpowsour.2019.04.072 ↗
36. Electrochemical performance and capacity degradation mechanism of single-phase La–Mg–Ni-based hydrogen storage alloys10.1016/j.jpowsour.2015.09.058 ↗
37. A new strategy for enhancing the cyclic stability of superlattice hydrogen storage alloys10.1016/j.cej.2021.129395 ↗
38. Reaction kinetics and X-ray absorption spectroscopy studies of Yttrium-containing metal hydride electrodes10.1149/1.1392518 ↗
39. A start of the renaissance for nickel metal hydride batteries: a hydrogen storage alloy series with an ultra-long cycle life10.1039/C6TA09736G ↗
40. Hydrides of substituted derivatives based on the YNi3 compound10.1007/s11003-007-0058-4 ↗
41. Hydrogen-induced amorphization in LaNi3-xMnx compounds10.1016/S1002-0721(09)60130-7 ↗
42. Investigation of H sorption and corrosion properties of Sm2MnxNi7−x (0 ≤ x < 0.5) intermetallic compounds forming reversible hydrides10.3390/en13133470 ↗
43. Hydrogen storage and electrochemical properties of Pr, Nd and Co-free La13.9Sm24.7Mg1.5Ni58Al1.7Zr0.14Ag0.07 alloy as a nickel-metal hydride battery electrode10.1016/j.jallcom.2017.10.268 ↗
44. The effects of Al substitution on the phase abundance, structure and electrochemical performance of La0.7Mg0.3Ni2.8Co0.5-xAlx (x = 0, 0.1, 0.2) alloys10.1016/j.jpowsour.2015.01.022 ↗
45. Investigation on the structures and electrochemical performances of La0.75-xZrxMg0.25Ni3.2Co0.2Al0.1 (x = 0–0.2) electrode alloys prepared by melt spinning10.1016/j.jallcom.2009.01.090 ↗
46. Phase transformation and cyclic characteristics of a Ce2Ni7-type single-phase La0.78Mg0.22Ni3.45 metal hydride alloy10.1039/C5TA02554K ↗
47. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
48. Rodríguez-Carvajal · 2003
49. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
50. A new method of determining the thermodynamic parameters of metal hydride electrode materials10.1016/S0360-3199(97)00013-X ↗
51. Mn in misch-metal based superlattice metal hydride alloy – Part 1 structural, hydrogen storage and electrochemical properties10.1016/j.jpowsour.2014.10.093 ↗
52. In-situ X-ray diffraction study on LaNi5 and LaNi4.75Al0.25 in the initial activation process10.1016/S0925-8388(00)01033-1 ↗
53. Phase transformation and lattice-strain formation in Ti1.0V1.1Mn0.9 during first absorption and desorption10.2320/matertrans.MA201004 ↗
54. Origin of degradation in the reversible hydrogen storage capacity of V1-xTix alloys from the atomic pair distribution function analysis10.1021/jp408766r ↗
55. Degradation mechanism against hydrogenation cycles in Mg2−xPrxNi4 (x = 0.6 and 1.0)10.1021/jp500855d ↗
56. Snyder · 1999
57. Hydrogen absorption–desorption characteristics of a Gd2Co7-type Sm1.6Mg0.4Ni7 compound10.1039/C6TA02889F ↗
58. Hydrogen storage properties and structure of La1-xMgx(Ni1-yMny)3 intermetallics and their hydrides10.1016/j.jallcom.2006.12.137 ↗
59. In situ XRD study of La2Ni7Hx during hydrogen absorption-desorption10.1021/ic401419n ↗
60. Mg substitution effect on the hydrogenation behaviour, thermodynamic and structural properties of the La2Ni7-H(D)2 system10.1016/j.jssc.2007.12.041 ↗
61. Structural and hydrogen storage properties of Y2Ni7 deuterides studied by neutron powder diffraction10.1021/acs.jpcc.5b03096 ↗