journal article·2022-02

Mechanistic modeling of Li plating in lithium-ion batteries

Jiani Li, Binghe Liu, Suli Li, Dianyang Hu, Lubing Wang, Jun Xu

Publisher page

Abstract

Li plating is considered as the major cause for the capacity degradation, resistance increase, and early short circuit of the cell. Due to the highly nonlinear and interdisciplinary nature, quantitative modeling of the Li plating process at the cell level is not available. Herein, we established a physics-based detailed model to describe the Li plating behaviors in a pouch cell level. The distribution of the current density and over-potential accurately predict the higher possibility of Li plating in the inner anode layers than the out layers. We discover that the larger thickness of the anode is more prone to have Li plating due to the liquid phase potential. The conductivity of electrolyte and diffusivity of Li-ion in cathode increase the Li plating risk while higher diffusivity of Li-ion in anode leads to a reduced risk. Battery charging mode also has a nontrivial influence on the Li plating probability. More importantly, the tab positions play a dominant role in the Li plating risk. Results unlock the fundamental working mechanism of Li plating in various design parameters and working scenarios, as well as provide a detailed modeling framework for the guidance of the next-generation long-cycle battery designs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
2. Li plating as unwanted side reaction in commercial Li-ion cells – a review10.1016/j.jpowsour.2018.02.063 ↗
3. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
4. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review
5. Thermodynamic understanding of Li-dendrite formation10.1016/j.joule.2020.06.016 ↗
6. Coupled crack propagation and dendrite growth in solid electrolyte of all-solid-state battery10.1016/j.nanoen.2021.106057 ↗
7. Experimental and numerical methods to investigate the overcharge caused lithium plating for lithium ion battery
8. Generalized separator failure criteria for internal short circuit of lithium-ion battery10.1016/j.jpowsour.2020.228360 ↗
9. Modeling overcharge at graphite electrodes: plating and dissolution of lithium
10. Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2+LiyMn2O4 composite cathode10.1016/j.jpowsour.2015.01.051 ↗
11. Optimization of charging strategy by prevention of lithium deposition on anodes in high-energy lithium-ion batteries – electrochemical experiments10.1016/j.electacta.2015.08.056 ↗
12. A coupled electrochemical-thermal-mechanical degradation modelling approach for lifetime assessment of lithium-ion batteries10.1016/j.electacta.2019.134928 ↗
13. The development of optimal charging protocols for lithium-ion batteries to reduce lithium plating10.1016/j.est.2021.102573 ↗
14. Fingerprinting redox heterogeneity in electrodes during extreme fast charging10.1149/1945-7111/ab8fd7 ↗
15. Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
16. Investigation of the temperature dependence of lithium plating onset conditions in commercial Li-ion batteries10.1016/j.energy.2019.01.017 ↗
17. Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures10.1016/j.jpowsour.2019.02.001 ↗
18. Influence of local lithium metal deposition in 3D microstructures on local and global behavior of Lithium-ion batteries10.1016/j.electacta.2016.01.220 ↗
19. Mathematical modeling of the lithium deposition overcharge reaction in lithium‐ion batteries using carbon‐based negative electrodes10.1149/1.1392512 ↗
20. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
21. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
22. Investigating lithium plating in lithium-ion batteries at low temperatures using electrochemical model with NMR assisted parameterization10.1149/2.0461706jes ↗
23. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
24. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells10.1016/j.jpowsour.2018.05.073 ↗
25. Modeling of lithium plating and lithium stripping in lithium-ion batteries10.1016/j.jpowsour.2018.12.084 ↗
26. Understanding of Li‐plating on graphite electrode: detection, quantification and mechanism revelation
27. Interplay of lithium intercalation and plating on a single graphite particle10.1016/j.joule.2020.12.020 ↗
28. In situ observation and mathematical modeling of lithium distribution within graphite10.1149/2.0061711jes ↗
29. Direct in situ measurements of Li transport in Li-ion battery negative electrodes10.1016/j.cplett.2009.12.033 ↗
30. In-situ scanning electron microscopy observations of Li plating and stripping reactions at the lithium phosphorus oxynitride glass electrolyte/Cu interface10.1016/j.jpowsour.2012.10.026 ↗
31. Deciphering the effect of electrical conductivity of hosts on lithium deposition in composite lithium metal anodes10.1002/aenm.202101654 ↗
32. Multimodal physics-based aging model for life prediction of Li-ion batteries10.1149/1.3043429 ↗
33. Understanding undesirable anode lithium plating issues in lithium-ion batteries10.1039/C6RA19482F ↗