Nonflammable and thermally stable glass fiber/polyacrylate (GFP) separator for lithium-ion batteries with enhanced safety and lifespan
Source abstract
Abstract
Abstract The thermal stability and electrolyte wettability of commercial polyolefin separators cannot support the safety and electrochemical performance of lithium-ion batteries (LIBs) under some limiting conditions. In this work, polyacrylate is dispersed into glass fibers by immersion, and then, a glass fiber/polyacrylate (GFP) separator is obtained after the rolling and drying process. Compared with the polyolefin (PE) separator, the GFP separator shows enhanced thermal stability, electrolyte wettability, ionic conductivity, and liquid absorption ability. There is almost no shrinkage of the GFP when it is annealed at 350 °C for 30 min. According to nail penetration, overcharge, and adiabatic rate calorimeter measurements using LiNi0.5Co0.2Mn0.3O2/graphite pouch cells with a nominal limited capacity of 2000 mAh, the GFP separator can effectively inhibit exothermic reactions in the batteries when the internal temperature is out of control. In addition, the adhesive property of polyacrylate can also strengthen the cell structure and inhibit expansion and deformation during cycling. The cells with the GFP separator also show enhanced capacity retention of 91% after 600 cycles at 1C. Thus, combined with its advantages in terms of price, preparation, electrochemical performance, and safety, the GFP separator exhibits promising prospects in the application of commercial LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
2. Lithium-ion batteries. A look into the future10.1039/c1ee01388b ↗
3. Reviving rechargeable lithium metal batteries: enabling next-generation high-energy and high-power cells10.1039/C2EE02911A ↗
4. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
5. Characterization and performance evaluation of lithium-ion battery separators10.1038/s41560-018-0295-9 ↗
6. A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries10.1016/j.memsci.2016.06.035 ↗
7. A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine-ceramic composite modification of polyolefin membranes10.1039/C6EE01219A ↗
8. Enhanced wettability and thermal stability of nano -SiO2/poly(vinylalcohol)-coated polypropylene composite separators for lithium-ion batteries10.1016/j.partic.2017.10.001 ↗
9. High performance separator coated with amino-functionalized SiO2 particles for safety enhanced lithium-ion batteries10.1016/j.memsci.2017.04.042 ↗
10. Polypropylene/hydrophobic-silica-aerogel-composite separator induced enhanced safety and low polarization for lithium-ion batteries10.1016/j.jpowsour.2017.11.086 ↗
11. TiO2 ceramic-grafted polyethylene separators for enhanced thermostability and electrochemical performance of lithium-ion batteries10.1016/j.memsci.2015.12.059 ↗
12. A heatproof separator for lithium-ion battery based on nylon 66 nanofibers10.1007/s11581-016-1698-x ↗
13. A nano-silica modified polyimide nanofiber separator with enhanced thermal and wetting properties for high safety lithium-ion batteries10.1016/j.memsci.2017.05.023 ↗
14. A paper-supported inorganic composite separator for high-safety lithium-ion batteries10.1016/j.memsci.2018.02.040 ↗
15. A quasi-solid composite separator with high ductility for safe and high-performance lithium-ion batteries10.1016/j.jpowsour.2019.01.005 ↗
16. Aqueous processing of paper separators by filtration dewatering: towards Li-ion paper batteries
17. Effect of OctaphenylPolyhedral oligomeric silsesquioxane on the electrospun Poly-m-phenylene isophthalamid separators for lithium-ion batteries with high safety and excellent electrochemical performance10.1016/j.cej.2018.09.010 ↗
18. Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries
19. Novel configuration of heat-resistant gel polymer electrolyte with electrospun poly (vinylidene fluoride-co-hexafluoropropylene) and polym-phenyleneisophthalamide composite separator for high-safety lithium-ion battery10.1016/j.matlet.2018.10.067 ↗
20. Single-paper flexible Li-ion battery cells through a paper-making process based on nano-fibrillated cellulose10.1039/c3ta01532g ↗
21. Thermally stable and green cellulose-based composites strengthened by styrene-co-acrylate latex for lithium-ion battery separators10.1016/j.carbpol.2018.11.025 ↗
22. Rice paper as a separator membrane in lithium-ion batteries10.1016/j.jpowsour.2011.12.028 ↗
23. Hybrid silica membranes with a polymer nanofiber skeleton and their application as lithium-ion battery separators10.1016/j.compscitech.2017.03.022 ↗
24. Synergism of surface group transfer and in-situ growth of silica-aerogel induced high-performance modified polyacrylonitrile separator for lithium/sodium-ion batteries10.1016/j.memsci.2019.02.002 ↗
25. Al2O3/PVDF-HFP-CMV/PE separator prepared using aqueous slurry and post-hot-pressing method for polymer lithium-ion batteries with enhances safety10.1016/j.electacta.2016.07.016 ↗
26. A four-layers hamburger-structure PVDF-HFP/Al2O3/PE/PVDF-HFP composite separator for pouch lithium-ion batteries with enhanced safety and reliability
27. A pore-controllable polyamine (PAI) layer-coated polyolefin (PE) separator for pouch lithium-ion batteries with enhanced safety10.1007/s10008-019-04488-y ↗
28. A heat-resistant poly(oxyphenylene benzimidazole)/ethyl cellulose blended polymer membrane for highly safe lithium-ion batteries10.1021/acsami.9b17374 ↗
29. Glass fiber fabric mat as the separator for lithium-ion battery with high safety performance10.1007/s11581-015-1540-x ↗
30. Flexible, heat-resistant, and flame-retardant glass fiber nonwoven/glass platelet composite separator for lithium-ion batteries10.3390/en11040999 ↗
31. Enhanced cycling stability of Li-O2 batteries by using a polyurethane/SiO2/glass fiber nanocomposite separator
32. Nanocomposite polymer membrane derived from nano TiO2-PMMA and glass fiber nonwoven: high thermal endurance and cycle stability in lithium ion battery applications10.1039/C5TA02781K ↗
33. Combining polymeric membranes with inorganic woven fabric: towards the continuous and affordable fabrication of a multifunctional separator for lithium-ion battery10.1016/j.memsci.2019.117364 ↗