journal article·2021-02

A stable zinc-based secondary battery realized by anion-exchange membrane as the separator

Yingming Wang, Hanqing Peng, Meixue Hu, Lin Zhuang, Juntao Lu, Li Xiao

Publisher page

Abstract

Abstract Zinc anode is promising for various aqueous batteries due to its low cost and high theoretical specific capacity. However, poor cycling stability caused by dendritic growth seriously hampered its widespread application. Herein, we demonstrate that by using an anion-exchange membrane, quaternary ammonia poly (N-methyl-piperidine-co-p-terphenyl) (QAPPT), as the separator, the damage from short circuits can be completely prevented. More details reveal that when approaching the QAPPT membrane, Zn dendrites perform a bending growth rather than pierce through it, which helps achieve a superior cycling stability without any short. The bending growth can be ascribed to a variation of electrolyte concentration at the electrode/membrane interface where Zn electrodeposited at a very low rate in the direction perpendicular to the membrane. By using QAPPT membrane, an ultra-stable Ni–Zn full cell is then realized. This finding may pave a facile way to solve the problems associated with dendrites for diverse alkaline Zn-based batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Reddy · 2011
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. The current state of aqueous Zn-based rechargeable batteries10.1021/acsenergylett.0c00502 ↗
4. Fibrous zinc anodes for high power batteries10.1016/j.jpowsour.2006.09.034 ↗
5. Highly reversible zinc metal anode for aqueous batteries10.1038/s41563-018-0063-z ↗
6. Development of A Rechargeable zinc-air battery10.1149/1.3507924 ↗
7. Mineral commodity summaries 2015: U.S
8. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
9. Dendrite growth in the recharging process of zinc-air batteries10.1039/C5TA06366C ↗
10. Zinc dendrites inhibition for zinc-based battery10.1002/cssc.201801657 ↗
11. The secondary alkaline zinc electrode10.1149/1.2085653 ↗
12. A calcium hydroxide interlayer as A selective separator for rechargeable alkaline Zn/MnO2 batteries10.1016/j.elecom.2017.06.020 ↗
13. Controlling the shape change and dendritic growth in Zn negative electrodes for application in Zn/Ni batteries10.1016/j.jpowsour.2017.03.069 ↗
14. Effects of bismuth ion and tetrabutylammonium bromide on the dendritic growth of zinc in alkaline zincate solutions10.1016/S0378-7753(01)00789-3 ↗
15. Lead ion and tetrabutylammonium bromide as inhibitors of the growth of spongy zinc in single flow zinc/nickel batteries10.1016/j.electacta.2011.10.042 ↗
16. Suppressing dendrite growth during zinc electrodeposition by PEG-200 additive10.1149/2.040311jes ↗
17. Bismuth oxide as an excellent anode additive for inhibiting dendrite formation in zinc-air secondary batteries10.1016/j.apsusc.2018.06.079 ↗
18. The effect of several electrode and electrolyte additives on the corrosion and polarization behavior of the alkaline zinc electrode10.1149/1.2407303 ↗
19. Avoiding short circuits from zinc metal dendrites in anode by backside-plating configuration10.1038/ncomms11801 ↗
20. Rechargeable nickel-3D zinc batteries: an energy-dense, safer alternative to lithium-ion10.1126/science.aak9991 ↗
21. Wiring zinc in three dimensions Re-writes battery performance-dendrite-free cycling10.1039/C3EE43754J ↗
22. Retaining the 3D framework of zinc sponge anodes upon deep discharge in Zn-air cells10.1021/am505266c ↗
23. Effect of ionomer films on secondary alkaline zinc electrodes10.1016/S0378-7753(98)00010-X ↗
24. Suppression of dendrite formation of zinc electrodes by the modification of anion-exchange ionomer10.5796/electrochemistry.80.725 ↗
25. Towards zinc-oxygen batteries with enhanced cycling stability: the benefit of anion-exchange ionomer for zinc sponge anodes10.1016/j.jpowsour.2018.05.079 ↗
26. Design strategy for zinc anodes with enhanced utilization and retention: electrodeposited zinc oxide on carbon mesh protected by ionomeric layers
27. Homogeneous coating with an anion-exchange ionomer improves the cycling stability of secondary batteries with zinc anode10.1021/acsami.7b18623 ↗
28. A flexible solid-state electrolyte for wide-scale integration of rechargeable zinc-air batteries10.1039/C5EE03404C ↗
29. Laminated cross-linked nanocellulose/graphene oxide electrolyte for flexible rechargeable zinc-air batteries10.1002/aenm.201600476 ↗
30. An interface bridged organic‐inorganic layer suppressing dendrite and side reactions for ultra‐long life aqueous Zn metal anodes
31. Anion-exchange membranes in electrochemical energy system10.1039/C4EE01303D ↗
32. Alkaline polymer electrolyte fuel cells stably working at 80 °C10.1016/j.jpowsour.2018.04.047 ↗
33. Radiation-grafted anion-exchange membranes: the switch from low- to high-density polythylene leads to remarkably enhanced fuel cell performance10.1039/C9EE00331B ↗
34. Poly(bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability10.1038/s41467-019-10292-z ↗
35. Poly(arylene piperidinium) hydroxide ion exchange membranes: synthesis, alkaline stability, and conductivity10.1002/adfm.201702758 ↗
36. Mechanical characterization of LiPON films using nanoindentation10.1016/j.tsf.2011.07.068 ↗
37. Ionomer-liquid electrolyte hybrid ionic conductor for high cycling stability of lithium metal electrodes10.1038/srep14458 ↗
38. Electrode edge effects and the failure mechanism of lithium-metal batteries10.1002/cssc.201801445 ↗
39. High-performance flexible asymmetric supercapacitors based on 3D porous graphene/MnO2 nanorod and graphene/Ag hybrid thin-film electrodes10.1039/C2TC00235C ↗
40. CoNi2S4 nanosheet arrays supported on nickel foam with ultrahigh capacitance for aqueous asymmetric supercapacitor applications10.1021/am5053784 ↗
41. Effects of separator on the electrochemical performance of electrical double-layer capacitor and hybrid battery-supercapacitor10.3866/PKU.WHXB201401131 ↗
42. Battery separators10.1021/cr020738u ↗
43. Evaluation of A Ceramic separator for use in rechargeable alkaline Zn/MnO2 batteries10.1016/j.jpowsour.2018.05.072 ↗
44. Soret coefficient and thermal diffusion constant of aqueous solutions of sugars10.1016/0040-6031(71)80019-9 ↗
45. Improved discharge capacity of zinc particles by applying bismuth-doped silica coating for zinc-based batteries10.3390/batteries5010032 ↗
46. Metal-air batteries with high energy density: Li-air versus Zn-air10.1002/aenm.201000010 ↗
47. Suppressing dendritic lithium formation using porous media in lithium metal-based batteries10.1021/acs.nanolett.8b00183 ↗
48. Electrochemical synthesis of dendritic zinc films composed of systematically varying motif crystals10.1021/la0611864 ↗
49. Hydroxide solvation and transport in anion exchange membranes10.1021/jacs.5b11951 ↗
50. Carbonate and biscarbonate ion transport in alkaline anion exchange membranes10.1149/2.037309jes ↗
51. Geometry and hydration structure of Pt(II) square planar complexes [Pt(H2O)4]2+ and [PtCl4]2− as studied by X-ray absorption spectroscopies and quantum-mechanical computations10.1021/jp010326+ ↗
52. Square-planar PtII versus octahedral PtIV halido complexes: 195Pt NMR explained by a simple empirical approach10.1002/ejic.201600573 ↗
53. Mechanism of the formation of zinc dendrites10.1149/1.2411297 ↗
54. Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries10.1038/nmat3602 ↗
55. Ionic-liquid nanoparticle hybrid electrolytes: applications in lithium metal batteries10.1002/anie.201307137 ↗
56. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
57. Dendritic electrocrystallisation and mechanism of powder formation in the potentiostatic electrodeposition of metals10.1007/BF00610985 ↗
58. Dendritic growth mechanisms in lithium/polymer cells10.1016/S0378-7753(98)00242-0 ↗
59. In situ concentration cartography in the neighborhood of dendrites growing in lithium/polymer-electrolyte/lithium cells10.1149/1.1392649 ↗
60. Coupling of drift, diffusion, and electroconvection, in the vicinity of growing electrodeposits10.1103/PhysRevE.48.1279 ↗
61. Bard · 1980
62. Directing lateral growth of lithium dendrites in micro-compartmented anode arrays for safe lithium metal10.1038/s41467-018-02888-8 ↗
63. Nickel-based rechargeable batteries10.1016/S0378-7753(01)00890-4 ↗
64. An ultrastable and high‐performance flexible fiber‐shaped Ni–Zn battery based on a Ni–NiO heterostructured nanosheet cathode10.1002/adma.201702698 ↗
65. One-pot hydrothermal synthesis of porous α-Ni(OH)2/C composites and its application in Ni/Zn alkaline rechargeable battery10.1149/2.0721805jes ↗
66. Comparison of the nature of magnetism in α-Ni(OH)2 and β-Ni(OH)210.1063/1.3358015 ↗