journal article·2021-01

Poly(ethylene-co-vinyl acetate)/polyimide/poly(ethylene-co-vinyl acetate) tri-layer porous separator with high conductivity and tailored thermal shutdown function for application in sodium-ion batteries

Sohee Kim, Mi-Sook Kwon, Jae Hee Han, Jinok Yuk, Jang Yong Lee, Kyu Tae Lee, Tae-Ho Kim

Publisher page

Abstract

Abstract A poly (ethylene-co-vinyl acetate) (EVA)/polyimide (PI)/EVA (PIE) tri-layer separator with thermal stability and a shutdown function is fabricated for use in sodium-ion battery (SIB) applications. Porous EVA layers are coated on both sides of an electrospun-PI, acting as a supporting layer, through a dip-coating process accompanying a thermally induced phase separation in which polyethylene-block-poly (ethylene glycol) is used as a polymeric pore generator to obtain an open porous morphology. Excellent thermal stability of the PIE tri-layer separator is demonstrated, with two simultaneous incompatible thermal behaviors, i.e., a negligible thermal shrinkage of up to 200 °C, and a rapid thermal shutdown at approximately 100 °C. In addition, the PIE tri-layer separator shows a higher ionic conductivity and larger electrolyte uptake of the sodium liquid electrolyte than a commercial olefin separator, leading to better cycling performance when assembled into SIB coin cells. All these outstanding properties of PIE tri-layer separator demonstrate that its promise as a candidate separator for use in SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
2. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
3. In situ welding: superb strength, good wettability and fire resistance tri-layer separator with shutdown function for high-safety lithium ion battery10.1016/j.memsci.2019.117509 ↗
4. Microporous ceramic coated separators with superior wettability for enhancing the electrochemical performance of sodium-ion batteries10.1016/j.jpowsour.2017.11.083 ↗
5. Sodium-ion batteries10.1002/adfm.201200691 ↗
6. A phosphorene-graphene hybrid material as a high-capacity anode for sodium-ion batteries10.1038/nnano.2015.194 ↗
7. A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries10.1039/C4EE03192J ↗
8. Electroactive poly(vinylidene fluoride) fluoride separator for sodium ion battery with high coulombic efficiency10.1016/j.ssi.2016.05.020 ↗
9. Shutdown-functionalized nonwoven separator with improved thermal and electrochemical properties for lithium-ion batteries10.1016/j.jpowsour.2015.11.106 ↗
10. Nanoporous polymer scaffold-embedded nonwoven composite separator membranes for high-rate lithium-ion batteries10.1039/C4RA07994A ↗
11. A review on the separators of liquid electrolyte Li-ion batteries10.1016/j.jpowsour.2006.10.065 ↗
12. Battery separators10.1021/cr020738u ↗
13. Prawn shell derived chitin nanofiber membranes as advanced sustainable separators for Li/Na-ion batteries10.1021/acs.nanolett.7b01875 ↗
14. Characterization of microporous separators for lithium-ion batteries10.1016/S0378-7753(98)00168-2 ↗
15. Tailored metal oxide thin film on polyethylene separators for sodium-ion batteries10.1149/2.1031709jes ↗
16. Separator technologies for lithium-ion batteries10.1007/s10008-010-1264-9 ↗
17. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator10.1021/am302290n ↗
18. Novel porous separator based on PVdF and PE non-woven matrix for rechargeable lithium batteries10.1016/j.jpowsour.2004.06.055 ↗
19. Electrochemical effect of coating layer on the separator based on PVdF and PE non-woven matrix10.1016/j.jpowsour.2005.03.047 ↗
20. Functional separator consisted of polyimide nonwoven fabrics and polyethylene coating layer for lithium-ion batteries10.1016/j.jpowsour.2015.08.008 ↗
21. Overcharge failure investigation of lithium-ion batteries10.1016/j.electacta.2015.07.147 ↗
22. Ceramic but flexible: new ceramic membrane foils for fuel cells and batteries10.1016/S0011-9164(02)00465-4 ↗
23. Electrochemical performances of polyacrylonitrile nanofiber-based nonwoven separator for lithium-ion battery10.1149/1.2730727 ↗
24. Wet-laid non-woven fabric for separator of lithium-ion battery10.1016/j.jpowsour.2008.09.078 ↗
25. Nonwoven support material for improved separators in Li-polymer batteries10.1016/j.jpowsour.2006.04.142 ↗
26. Development and evaluation of a prototype non-woven fabric filter for purification of malaria-infected blood10.1186/1475-2875-10-251 ↗
27. Effects of fiber diameter distribution of nonwoven fabrics on its properties
28. Single-ion conducting electrolyte based on electrospun nanofibers for high-performance lithium batteries10.1002/aenm.201803422 ↗
29. A facile non-solvent induced phase separation process for preparation of highly porous polybenzimidazole separator for lithium metal battery application10.1038/s41598-019-55865-6 ↗
30. Effectively suppressing lithium dendrite growth via an es-LiSPCE single-ion conducting nano fiber membrane10.1039/C9TA12783F ↗
31. Toward a detoxification fabric against nerve gas agents: guanidine-functionalized poly[2-(3-butenyl)-2-oxazoline]/Nylon-6,6 nanofibers10.1039/C7RA01278K ↗
32. Highly porous single-ion conductive composite polymer electrolyte for high performance Li-ion batteries10.1016/j.jpowsour.2018.07.007 ↗
33. Particle size-dependent, tunable porous structure of a SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated poly(ethylene terephthalate) nonwoven composite separator for a lithium-ion battery10.1039/c1jm12246k ↗
34. Membranes in lithium ion batteries10.3390/membranes2030367 ↗
35. Potential application of microporous structured poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separators to high-voltage and high-power lithium-ion batteries10.1016/j.electacta.2011.03.040 ↗
36. Material review of Li ion battery separators10.1063/1.4878480 ↗
37. Composite nonwoven separator for lithium-ion battery: development and characterization10.1016/j.jpowsour.2010.01.018 ↗
38. Nanofiber-based hydrocolloid from colloid electrospinning toward next generation wound dressing10.1002/mame.201600002 ↗
39. Zirconium hydroxide-coated nanofiber mats for nerve agent decontamination10.1002/asia.201601729 ↗
40. Microporous PVDF membranes via thermally induced phase separation (TIPS) and stretching methods10.1016/j.memsci.2016.02.050 ↗
41. Thermally-induced phase separation (TIPS) and electrospinning methods for emerging membrane applications: a review10.1002/aic.15076 ↗
42. Ultrastrong and heat-resistant poly(ether ether ketone) separator for dendrite-proof and heat-resistant lithium-ion batteries10.1021/acsaem.9b00568 ↗
43. Effects of separator breakdown on abuse response of 18650 Li-ion cells10.1016/j.jpowsour.2007.06.163 ↗
44. P2 orthorhombic Na0.7[Mn1–xLix]O2+y as cathode materials for Na-ion batteries10.1021/acsami.7b00058 ↗
45. Formation of porous poly(ethylene-co-vinyl alcohol) membrane via thermally induced phase separation10.1002/1097-4628(20010328)79:13<2449::AID-APP1052>3.0.CO;2-U ↗
46. Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties10.1007/s10118-010-9022-0 ↗
47. Poly(ethylene chlorotrifluoroethylene) membrane formation via thermally induced phase separation (TIPS)10.1016/j.memsci.2010.06.042 ↗
48. Conductive membranes of EVA filled with carbon black and carbon nanotubes for flexible energy-storage devices10.1039/C2TA00650B ↗
49. Lithium ion battery separators: development and performance characterization of a composite membrane10.1016/j.memsci.2012.09.027 ↗
50. Robust polyetherimide fibrous membrane with crosslinked topographies fabricated via in-situ micro-melting and its application as superior Lithium-ion battery separator with shutdown function10.1016/j.memsci.2017.12.015 ↗
51. Barium titanate-based porous ceramic flexible membrane as a separator for room-temperature sodium-ion battery10.1021/acsami.8b17887 ↗