Wearable glucose/oxygen biofuel cell fabricated using modified aminoferrocene and flavin adenine dinucleotide-dependent glucose dehydrogenase on poly(glycidyl methacrylate)-grafted MgO-templated carbon
Source abstract
Abstract
We have developed a new electrode material for biofuel cells (BFCs) in which a mediator was covalently immobilized on MgO-templated porous carbon (MgOC). Grafted MgOC (GMgOC) was prepared by modifying poly (glycidyl methacrylate) on the MgOC surface by electron beam graft polymerization. Furthermore, aminoferrocene (AmFc) and flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) were immobilized by covalent bonding between the amino group and pendant glycidyl group. The current density estimated by cyclic voltammetry was approximately 21.2 mA cm−2 at 0.49 V in a 1 mol L−1 phosphate buffer containing 100 mmol L−1 glucose. The current value was stable because of the suppression of AmFc elution after 10 h of continuous measurement. A glucose/O2 BFC was fabricated by combining an anode modified with FAD-GDH/poly(GMA)-modified AmFc and a BOD/2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-modified water-repellent cathode and applying 1 mol L−1 PBS containing 300 mmol L−1 glucose (pH 7.0). The BFC showed a high power density of 3.6 mW cm−2. We fabricated a wearable BFC based on hydrogels with ortho hydroquinone groups that can maintain adhesiveness on human skin. The power density of the wearable cell was 0.42 mW cm−2 at 0.38 V in the air, which is sufficient output to power a small electronic device.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Kinetics of redox polymer-mediated enzyme electrodes10.1021/ja0781543 ↗
2. Carbon nanotube–ionic liquid composite gel based high-performance bioanode for glucose/O2 biofuel cells10.1039/C5AY00863H ↗
3. Improved power density of an enzymatic biofuel cell with fibrous supports of high curvature10.1039/C5RA25895B ↗
4. Flexible glucose/oxygen enzymatic biofuel cells based on three-dimensional gold-coated nickel foam10.1007/s10008-018-4099-4 ↗
5. Nanoporous gold-based biofuel cells on contact lenses10.1021/acsami.7b18708 ↗
6. Miniature biofuel cell as a potential power source for glucose-sensing contact lenses10.1021/ac4006793 ↗
7. Stretchable biofuel cells as wearable textile-based self-powered sensors10.1039/C6TA08358G ↗
8. Soft, stretchable, high power density electronic skin-based biofuel cells for scavenging energy from human sweat10.1039/C7EE00865A ↗
9. Based disk-type self-powered glucose biosensor based on screen-printed biofuel cell array10.1149/2.1501912jes ↗
10. High-power lactate/O2 enzymatic biofuel cell based on carbon cloth electrodes modified with MgO-templated carbon10.1016/j.jpowsour.2019.226844 ↗
11. Long tethers binding redox centers to polymer backbones enhance electron transport in enzyme “wiring” hydrogels10.1021/ja029510e ↗
12. A low‐cost biofuel cell with pH‐dependent power output based on porous carbon as matrix10.1002/chem.200500308 ↗
13. A high-power glucose/oxygen biofuel cell operating under quiescent conditions10.1039/B809841G ↗
14. Fabrication and characterization of ferrocenece containing hydrogel for glucose biosensor application10.1016/S1452-3981(23)10990-4 ↗
15. Immobilization of pyrroloquinoline quinone-dependent alcohol dehydrogenase with a polyion complex and redox polymer for a bioanode10.3390/catal7100296 ↗
16. Electrical communication between redox centers of glucose oxidase and electrodes via electrostatically and covalently bound redox polymers10.1021/ja00188a091 ↗
17. Steady-state bioelectrocatalytic current10.5189/revpolarography.52.81 ↗
18. Improvement of a direct electron transfer-type fructose/dioxygen biofuel cell with a substrate-modified biocathode10.1039/c3cp54888k ↗
19. Exceptionally high glucose current on a hierarchically structured porous carbon electrode with “wired” flavin adenine dinucleotide-dependent glucose dehydrogenase10.1021/ja5053736 ↗
20. Nanostructuring carbon supports for optimal electrode performance in biofuel cells and hybrid fuel cells10.1007/s10008-015-2969-6 ↗
21. Stable immobilization of enzyme on pendant glycidyl group-modified mesoporous carbon by graft polymerization of poly(glycidyl methacrylate)10.1246/bcsj.20190212 ↗
22. Layer-by-layer self-assembly of glucose oxidase with a poly (allylamine) ferrocene redox mediator10.1021/la962014h ↗
23. Preparation and characterization of a bioadhesive with poly (vinyl alcohol) crosslinking agent10.1002/app.38115 ↗
24. A reversible wet/dry adhesive inspired by mussels and geckos10.1038/nature05968 ↗
25. A clear coat from a water soluble precursor: a bioinspired paint concept
26. Effects of chain transfer agent on the electron beam-induced graft polymerization of glycidyl methacrylate in emulsion phase10.1007/s00396-017-4088-7 ↗
27. Electron-transfer pathways in amperometric biosensors. Ferrocene-modified enzymes entrapped in conducting-polymer layers10.1016/0956-5663(95)96805-9 ↗
28. High-performance enzymatic biofuel cell based on flexible carbon cloth modified with MgO-templated porous carbon10.1016/j.jpowsour.2019.04.064 ↗
29. High power enzymatic biofuel cell based on naphthoquinone-mediated oxidation of glucose by glucose oxidase in a carbon nanotube 3D matrix10.1039/c3cp50767j ↗
30. Injectable citrate-based mussel-inspired tissue bioadhesives with high wet strength for sutureless wound closure10.1016/j.biomaterials.2012.07.055 ↗
31. The chemistry behind catechol-based adhesion