Effect of contaminant mixtures in air on proton exchange membrane fuel cell performance
Source abstract
Abstract
Abstract The effects of single, binary and ternary contaminant mixtures containing propene (C3H6), acetonitrile (CH3CN), and bromomethane (CH3Br) on proton exchange membrane fuel cells have been studied. Changes in polarization curves, electrochemical impedance spectroscopy spectra, electrochemical catalyst surface areas by cyclic voltammetry, and hydrogen crossover through the membrane by chronoamperometry are used to define the extent of recovery and irrecoverable losses after the contamination period and to understand the contaminant interactions. CH3CN in the contaminant mixture mitigates the decrease in oxygen reduction reaction kinetics and the increase in oxygen and water mass transport resistance, while C3H6 speeds up the above situations. The hydrolysis of CH3CN results in the formation of ammonium ions, which exchange with membrane protons, leading to an increase in the membrane resistance. CH3Br increases the decomposition of the Nafion® ionomer. Bromide accumulation on the catalyst surface leads to large catalyst area losses for the mixtures containing CH3Br. Competitive adsorption on Pt active sites exists between CH3CN and CH3Br. However, there is noncompetitive adsorption between C3H6 and CH3Br or CH3CN.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
2. PEMFC contamination model: competitive adsorption followed by an electrochemical reaction10.1149/1.3043419 ↗
3. PEMFC contamination model: competitive adsorption demonstrated with NO210.1149/1.2833301 ↗
4. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
5. Diagnosis of contamination introduced by ammonia at the cathode in a polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2012.05.125 ↗
6. The effects of battlefield contaminants on PEMFC performance10.1016/S0378-7753(99)00341-9 ↗
7. Polymer electrolyte membrane fuel cell contamination: testing and diagnosis of toluene-induced cathode degradation10.1016/j.jpowsour.2008.07.006 ↗
8. PEM fuel cell contamination: effects of operating conditions on toluene-induced cathode degradation10.1149/1.3040212 ↗
9. Effect of selected airborne contaminants on PEMFC performance10.1149/2.057403jes ↗
10. Quantitative ranking criteria for PEMFC contaminants10.1016/j.ijhydene.2012.01.029 ↗
11. PEMFC cathode catalyst contamination evaluation with a RRDE-propene and naphthalene10.1016/j.electacta.2014.06.147 ↗
12. PEMFC cathode catalyst contamination evaluation with a RRDE-acetonitrile10.1016/j.electacta.2014.04.149 ↗
13. The ionic conductivity and catalyst activity effects of acetonitrile on proton exchange membrane fuel cells10.1016/j.elecom.2016.02.024 ↗
14. Study of the acetonitrile poisoning of platinum cathodes on proton exchange membrane fuel cell spatial performance using a segmented cell system10.1016/j.jpowsour.2015.06.013 ↗
15. Bromomethane contamination in the cathode of proton exchange membrane fuel cells10.1016/j.electacta.2016.06.157 ↗
16. Effect of acetonitrile contamination on long-term degradation of proton exchange membrane fuel cells10.1149/2.0221806jes ↗
17. Effects of propylene, methyl methacrylate and isopropanol poisoning on spatial performance of a proton exchange membrane fuel cell10.1016/j.jpowsour.2017.12.038 ↗
18. The impact of operating conditions on the performance effects of selected airborne PEMFC contaminants
19. The effect of H2S and CO mixtures on PEMFC performance10.1016/j.ijhydene.2007.06.029 ↗
20. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
21. The effect of nitrogen oxides in air on the performance of proton exchange membrane fuel cell10.1016/j.electacta.2005.11.018 ↗
22. Influence of air contaminants on planar, self-breathing hydrogen PEM fuel cells in an outdoor environment10.1016/j.jpowsour.2013.08.064 ↗
23. Propene oxidation and hydrogenation on a porous platinum electrode in acidic solution10.1021/jp021726f ↗
24. The bromine electrode. Part I: adsorption phenomena at polycrystalline platinum electrodes10.1023/B:JACH.0000042666.25746.e6 ↗
25. The oxidation of bromide on platinum electrodes in aqueous, acidic solutions: electrochemical and in situ spectroscopic studies10.1149/2.082406jes ↗
26. Characterization of adsorbates by transient measurements in scanning electrochemical microscopy10.1016/j.electacta.2014.02.002 ↗
27. Voltammetric study of the reduction of molecular oxygen on bright platinum in perchloric acid solution10.1016/0013-4686(64)80050-5 ↗
28. Electro-oxidation and electroreduction of acetonitrile in aqueous acid solution: a DEMS study10.1016/0022-0728(93)80487-3 ↗
29. PEMFC contamination model: neutral species sorption by ionomer
30. Analysis of the SO2 contamination effect on the oxygen reduction reaction in PEMFCs by electrochemical impedance spectroscopy10.1149/2.067205jes ↗
31. Characterization of high-surface-area electrocatalysts using a rotating disk electrode configuration10.1149/1.1838642 ↗
32. Relationships between water management, contamination and lifetime degradation in PEFC
33. Oxygen and hydrogen permeation properties and water uptake of Nafion® 117 membrane and recast film for PEM fuel cell10.1023/A:1018469520562 ↗
34. Unprecedented effect of impurity cations on the oxygen reduction kinetics at platinum electrodes covered with perfluorinated ionomer10.1021/la990625e ↗
35. Oxygen reduction kinetics at platinum electrodes covered with perfluorinated ionomer in the presence of impurity cations Fe3+, Ni2+ and Cu2+10.1039/b002566f ↗
36. Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review10.1039/C7SE00038C ↗
37. Oxygen reduction reaction on Pt (111): effects of bromide10.1016/S0022-0728(99)00020-0 ↗
38. The effect of airborne contaminants on fuel cell performance and durability
39. Relationships between PEMFC cathode kinetic losses and contaminants' dipole moment and adsorption energy on Pt10.1149/2.1061603jes ↗
40. Adsorption of acetonitrile on platinum and its effects on oxygen reduction reaction in acidic aqueous solutions—combined theoretical and experimental study10.1007/s12678-016-0301-6 ↗
41. Particle size effects for oxygen reduction on highly dispersed platinum in acid electrolytes10.1149/1.2086566 ↗
42. Surface characterization of platinum electrodes10.1039/B709809J ↗