Densely quaternized poly(arylene ether)s with distinct phase separation for highly anion-conductive membranes
Source abstract
Abstract
Abstract To develop high performance anion exchange membranes (AEMs), a novel bisphenol monomer bearing eight benzylmethyl groups at the outer edge of the molecule was synthesized, which after condensation polymerization with various amounts of 4,4′-dihydroxydiphenylsulfone and 4,4′-difluorobenzophenone yielded novel poly(arylene ether)s with densely located benzylmethyl groups. These benzylmethyl groups were then converted to quaternary ammonium groups by radical-initiated bromination and quaternization in tandem, leading to the emergence of densely quaternized poly(arylene ether sulfone)s (QA-PAEs) with controlled ion exchange capacities (IECs) ranging from 1.61 to 2.32 mmol g−1. Both small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) studies revealed distinct phase separation in the QA-PAEs. The QA-PAE-40 with an IEC of 2.32 mmol g−1 exhibited a Br− conductivity of 9.2 mS cm−1 and a SO42− conductivity of 14.0 mS cm−1 at room temperature, much higher than those of a control membrane with a similar IEC but without obvious phase separation. Therefore, phase separation of AEMs was validated to be advantageous for the efficient conducting of anions. The experimental results also showed that the QA-PAEs were promising AEM materials, especially for non-alkaline applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Polymeric materials as anion-exchange membranes for alkaline fuel cells10.1016/j.progpolymsci.2011.04.004 ↗
2. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
3. Optimized anion exchange membranes for vanadium redox flow batteries10.1021/am401858r ↗
4. Highly stable pyridinium-functionalized cross-linked anion exchange membranes for all vanadium redox flow batteries10.1016/j.jpowsour.2016.09.065 ↗
5. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
6. Studies on anion exchange membranes having permselectivity for specific anions in electrodialysis—effect of hydrophilicity of anion exchange membranes on permselectivity of anion10.1016/S0376-7388(99)00277-X ↗
7. Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes10.1002/adma.201001164 ↗
8. Tangential and normal conductivities of Nafion® membranes used in polymer electrolyte fuel cells10.1016/j.jpowsour.2004.03.028 ↗
9. Prospects for alkaline anion-exchange-membranes in low temperature fuel cells10.1002/fuce.200400045 ↗
10. Side-chain-type anion exchange membranes bearing pendent imidazolium-functionalized poly(phenylene oxide) for fuel cells10.1016/j.memsci.2016.04.054 ↗
11. Anion exchange membranes based on tetra-quaternized poly(arylene ether ketone)10.1016/j.memsci.2015.09.003 ↗
12. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
13. Nanostructured ion-exchange membranes for fuel cells: recent advances and perspectives10.1002/adma.201501406 ↗
14. Ion exchange membranes: new developments and applications10.1016/j.memsci.2016.09.033 ↗
15. Synthesis and structure–conductivity relationship of polystyrene-block -poly(vinyl benzyl trimethylammonium) for alkaline anion exchange membrane fuel cells10.1002/polb.23170 ↗
16. Anion exchange membranes based on quaternized polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene for direct methanol alkaline fuel cells10.1016/j.memsci.2009.11.051 ↗
17. Anion exchange membranes by bromination of tetramethylbiphenol-based poly(sulfone)s10.1039/C7PY00026J ↗
18. Phosphonium-functionalized polyethylene: a new class of base stable alkaline anion exchange membranes10.1021/ja307466s ↗
19. Self-crosslinking for dimensionally stable and solvent-resistant quaternary phosphonium based hydroxide exchange membranes10.1039/c0cc04335d ↗
20. RAFT polymerization and thermal behavior of trimethyl -phosphonium polystyrenes for anion exchange membranes10.1039/C0PY00293C ↗
21. Synthesis and properties of anion conductive ionomers containing fluorenyl groups for alkaline fuel cell applications10.1039/C0PY00238K ↗
22. Details concerning the chloromethylation of soluble high-molecular-weight polystyrene using dimethoxymethane, thionyl chloride, and a Lewis acid: a full analysis10.1021/ma00021a025 ↗
23. Transport properties of hydroxide and proton conducting membranes10.1021/cm703263n ↗
24. Fundamental studies of a new series of anion exchange membranes: membrane preparation and characterization10.1016/S0376-7388(01)00434-3 ↗
25. Anionic membrane and ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for alkaline membrane fuel cells10.1016/j.jpowsour.2011.06.015 ↗
26. Side-chain-type anion exchange membranes bearing pendent imidazolium-functionalized poly(phenylene oxide) for fuel cells10.1016/j.memsci.2016.04.054 ↗
27. Synthesis of multi-block poly(arylene ether sulfone) copolymer membrane with pendant quaternary ammonium groups for alkaline fuel cell10.1016/j.jpowsour.2011.01.081 ↗
28. A novel methodology to synthesize highly conductive anion exchange membranes10.1038/srep13417 ↗
29. Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells10.1021/ja204166e ↗
30. Transport properties of vanadium ions in cation exchange membranes: determination of diffusion coefficients using a dialysis cell10.1016/S0376-7388(97)00308-6 ↗
31. Chemical and mechanical degradation of sulfonated poly(sulfone) membranes in vanadium redox flow batteries10.1007/s10800-011-0313-0 ↗
32. Locally and densely sulfonated poly(ether sulfone)s as proton exchange membrane10.1021/ma802637w ↗
33. Novel polyaromatic ionomers with large hydrophilic domain and long hydrophobic chain targeting at highly proton conductive and stable membranes10.1039/c1jm10950b ↗
34. Comparison of alkaline stability of benzyltrimethylammonium, benzylmethylimidazolium and benzyldimethylimidazolium functionalized poly(arylene ether ketone) anion exchange membranes10.1016/j.ijhydene.2015.12.123 ↗
35. Hydroxide-conducting polymer electrolyte membranes from aromatic ABA triblock copolymers10.1039/c3py01673k ↗
36. Phosphonium-containing ABA triblock copolymers: controlled free radical polymerization of phosphonium ionic liquids10.1021/ma200829h ↗
37. Ion clustering in quaternary ammonium functionalized benzylmethyl containing poly(arylene ether ketone)s10.1021/ma401620m ↗
38. Influence of 2,2,6,6-tetramethyl biphenol based anion-exchange membranes on the diffusion dialysis of hydrochloride acid10.1002/app.45333 ↗
39. Aromatic polymers incorporating bis-n-spirocyclic quaternary ammonium moieties for anion-exchange membranes10.1021/acsmacrolett.5b00690 ↗
40. Anion-conducting polysulfone membranes containing hexaimidazolium functionalized biphenyl units10.1016/j.memsci.2016.07.051 ↗
41. Anion-conducting polysulfone membranes containing hexaimidazolium functionalized biphenyl units10.1039/C4PY01588F ↗
42. Poly(phenylene oxide) copolymer anion exchange membranes10.1002/polb.23245 ↗
43. Multication side chain anion exchange membranes10.1021/acs.macromol.5b02671 ↗
44. Effect of fluorene groups on the properties of multiblock poly(arylene ether sulfone)s-based anion-exchange membranes10.1021/am5017599 ↗
45. Synthesis of midblock-quaternized triblock copolystyrenes as highly conductive and alkaline-stable anion-exchange membranes10.1039/C6PY02213H ↗
46. V5+ degradation of sulfonated Radel membranes for vanadium redox flow batteries10.1039/c3cp52035h ↗
47. Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery10.1016/j.memsci.2008.08.025 ↗
48. Synthesis and characterization of novel sulfonated poly(arylene thioether) ionomers for vanadium redox flow battery applications10.1039/B917117G ↗