journal article·2017-03

Improving a free air breathing proton exchange membrane fuel cell through the Maximum Efficiency Point Tracking method

Mauricio Higuita Cano, Mohamed Islam Aniss Mousli, Sousso Kelouwani, Kodjo Agbossou, Mhamed Hammoudi, Yves Dubé

Publisher page

Abstract

Abstract This work investigates the design and validation of a fuel cell management system (FCMS) which can perform when the fuel cell is at water freezing temperature. This FCMS is based on a new tracking technique with intelligent prediction, which combined the Maximum Efficiency Point Tracking with variable perturbation-current step and the fuzzy logic technique (MEPT-FL). Unlike conventional fuel cell control systems, our proposed FCMS considers the cold-weather conditions, the reduction of fuel cell set-point oscillations. In addition, the FCMS is built to respond quickly and effectively to the variations of electric load. A temperature controller stage is designed in conjunction with the MEPT-FL in order to operate the FC at low-temperature values whilst tracking at the same time the maximum efficiency point. The simulation results have as well experimental validation suggest that propose approach is effective and can achieve an average efficiency improvement up to 8%. The MEPT-FL is validated using a Proton Exchange Membrane Fuel Cell (PEMFC) of 500 W.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Control of proton exchange membrane fuel cell system breathing based on maximum net power control strategy10.1016/j.jpowsour.2013.04.067 ↗
2. PEM fuel cell heat recovery for preheating inlet air in standalone solar-hydrogen systems for telecommunication applications: an exergy analysis10.1016/j.ijhydene.2015.12.108 ↗
3. Performance evaluation of a polymer electrolyte membrane fuel cell system for powering portable freezer10.1016/j.apenergy.2012.12.056 ↗
4. Maximum power point tracking control method for proton exchange membrane fuel cell10.1049/iet-rpg.2015.0205 ↗
5. Energy management strategy for a fuel cell hybrid vehicle based on maximum efficiency and maximum power identification10.1049/iet-est.2015.0023 ↗
6. Modeling and operation optimization of a proton exchange membrane fuel cell system for maximum efficiency10.1016/j.enconman.2016.01.045 ↗
7. Dynamic optimization under uncertainty of the synthesis/design and opera- tion/control of a proton exchange membrane fuel cell system10.1016/j.jpowsour.2011.11.014 ↗
8. Optimization-based energy management strategy for a fuel cell/battery hybrid power system10.1016/j.apenergy.2015.10.176 ↗
9. Simultaneous optimization of net power and enhancement of PEM fuel cell lifespan using extremum seeking and sliding mode control techniques10.1109/TEC.2016.2514738 ↗
10. Efficient energy control strategies for a standalone renewable/fuel cell hybrid power source10.1016/j.enconman.2014.11.002 ↗
11. Controlling of proton ex- change membrane fuel cell by model predictive controller based on AN- FIS model10.1002/fuce.201600001 ↗
12. Optimiza- tion of a PEM fuel cell operating conditions: obtaining the maximum performance polarization curve10.1016/j.ijhydene.2016.03.136 ↗
13. Control of PEM fuel cell power system using sliding mode and super-twisting algorithms
14. Proton exchange membrane fuel cell purge and fan control using a microcontroller
15. Temperature control for a polymer electrolyte membrane fuel cell by using fuzzy rule10.1109/TEC.2015.2511155 ↗
16. Dynamic performance of a high-temperature PEM (proton exchange membrane) fuel cell modelling and fuzzy control of purging process10.1016/j.energy.2015.12.019 ↗
17. An adaptive fuzzy logic controller (AFLC) for PEMFC fuel cell10.1016/j.ijhydene.2015.05.189 ↗
18. General review and classification of different MPPT techniques10.1016/j.rser.2016.09.132 ↗
19. Study of the MPP tracking algorithms: focusing the numerical method techniques10.1016/j.rser.2016.04.039 ↗
20. On- line identification of semi-empirical model parameters for PEMFCs10.1016/j.ijhydene.2014.10.045 ↗
21. Technologies · 2009
22. Free air breath- ing proton exchange membrane fuel cell: thermal behavior characterization near freezing temperature10.1016/j.jpowsour.2013.07.074 ↗
23. Optimization of a PEM fuel cell system based on empirical data and a generalized electrochemical semi- empirical model10.1016/j.jpowsour.2006.05.056 ↗
24. Larminie · 2003
25. Incropera · 2011
26. Holman · 1990
27. Hilsenrath · 1960 · 1955
28. Experimental evaluation of PEM fuel cell systems efficiency
29. Performance of a stand- alone renewable energy system based on energy storage as hydrogen10.1109/TEC.2004.827719 ↗
30. Adaptive maxi- mum power point tracking control of fuel cell power plants10.1016/j.jpowsour.2007.10.080 ↗
31. Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems10.1016/j.solmat.2005.10.023 ↗
32. Maximum power point tracking of solar photovoltaic system using modified perturbation and observation method10.1016/j.rser.2015.04.072 ↗
33. Maximum Efficiency Point Tracking for hydrogen fuel cells
34. Maximum Efficiency Point Tracking (MEPT) method and digital dead time control implementation, Power Electronics
35. MPPT controller for an interleaved boost dcdc converter used in fuel cell electric vehicles10.1016/j.ijhydene.2014.03.185 ↗