journal article·2014-06

Electrodeposition and isothermal aging of Co and Mn layers on stainless steel for interconnectors: Initial stages of spinel phase formation

R. Pinto, M.J. Carmezim, M.F. Montemor

Publisher page

Abstract

Abstract Electrodeposited Co and Mn spinel phase oxides for application as coatings for metallic interconnectors in Solid Oxide Fuel Cells were prepared. The study aims at understanding the initial stages of transformation of the metallic layers into the spinel phase. Co and Mn metallic layers were sequentially deposited over AISI 430 stainless steel substrate from acidic sulfate solutions and annealed in oxidizing and inert atmospheres between 600 °C and 800 °C. The coatings obtained showed a thickness above 20 μm. After 1 h of isothermal aging the coatings were composed of layers of un-reacted metallic elements and Mn based oxides. The spinel phase was studied by XRD and revealed Mn based tetragonal structure Mn 3 O 4 with Co in solid solution and a non-determined Co/Mn ratio. According to EDS measurements this ratio should vary with depth. Full conversion was not obtained at these time frames with the presence other Mn oxides (MnO and Mn 2 O 3 ). In inert atmosphere, the allotropic Mn transformation from α to β phase was detected. No outward diffusion of Cr was detected, due to the short exposure times.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Steele · Solid State Ionics · 2000 · 129 · 9510.1016/S0167-2738(99)00319-7 ↗
2. Goodenough · Annu. Rev. Mater. Res. · 2003 · 33 · 9110.1146/annurev.matsci.33.022802.091651 ↗
3. Singh · Ionics · 2007 · 13 · 42910.1007/s11581-007-0123-x ↗
4. Fergus · Mater. Sci. Eng. A · 2005 · 397 · 27110.1016/j.msea.2005.02.047 ↗
5. 2003 · 119
6. Anderson · 2003 · 177
7. Shaigan · J. Power Sources · 2010 · 195 · 152910.1016/j.jpowsour.2009.09.069 ↗
8. Petric · J. Am. Ceram. Soc. · 2007 · 90 · 151510.1111/j.1551-2916.2007.01522.x ↗
9. Wu · J. Power Sources · 2008 · 177 · 37610.1016/j.jpowsour.2007.11.075 ↗
10. Wu · J. Power Sources · 2009 · 189 · 110610.1016/j.jpowsour.2008.12.079 ↗
11. Shaigan · J. Power Sources · 2008 · 185 · 33110.1016/j.jpowsour.2008.06.065 ↗
12. Bateni · Surf. Coat. Technol. · 2007 · 201 · 467710.1016/j.surfcoat.2006.10.011 ↗
13. Wang · J. Am. Ceram. Soc. · 2011 · 94 · 449010.1111/j.1551-2916.2011.04749.x ↗
14. Magdefrau · J. Power Sources · 2013 · 227 · 31810.1016/j.jpowsour.2012.07.091 ↗
15. Froitzheim · J. Power Sources · 2012 · 220 · 21710.1016/j.jpowsour.2012.06.092 ↗
16. 2000 · 349
17. Wei · Surf. Coat. Technol. · 2007 · 201 · 773910.1016/j.surfcoat.2007.03.007 ↗
18. Radhakrishnamurthy · J. Appl. Electrochem. · 1974 · 4 · 31710.1007/BF00608973 ↗
19. Electrodeposition of Alloys – Principles and Practice
20. Cullity · 1956 · 466
21. Pourbaix · 1974
22. Ishida · Bull. Alloy Phase Diagrams · 1990 · 11 · 12510.1007/BF02841695 ↗
23. Grundy · J. Phase Equilib. · 2003 · 24 · 21
24. Satomi · J. Phys. Soc. Jpn. · 1961 · 16 · 25810.1143/JPSJ.16.258 ↗
25. ASM Handbook