journal article·2022-03

Comparative investigation of the impact of fast charging at low temperature on commercial Li-ion cells

Alexis Laforgue, Xiao-Zi Yuan, Alison Platt, Shawn Brueckner, Florence Perrin-Sarazin, Mathieu Toupin, Jean-Yves Huot, Asmae Mokrini

Publisher page

Abstract

This study addresses the challenges associated with lithium-ion battery fast charging at a low temperature. A number of commercially available 18650 Li-ion cells were selected and comparatively tested for fast charging at different temperatures. Whereas a majority of the cells were able to fast charge efficiently at 23 °C, their fast charging capabilities decreased significantly at lower temperatures. Interestingly, the five best cells included energy, balanced and power cells. The best cells were repeatedly charged at a 2C rate for 300 cycles, leading to varying performance profiles, strongly depending on the temperature. A post-mortem analysis was carried out for the cells fast charged at −10 °C to investigate the failure modes. Even though several degradation modes were observed, the main cause for performance decay and cell failure was a loss of lithium inventory caused by an abnormal growth of the anode solid electrolyte interphase (SEI). Lithium plating and graphite exfoliation were determined to be the main causes for SEI growth. Finally, a comparative analysis was performed on the battery component choices and manufacturing parameters, which provides guidance towards the manufacturing of cells more capable of sustaining repeated fast charges at ambient and low temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Global EV Outlook · 2021
2. Studies on charging lithium-ion cells at low temperatures10.1149/1.2190029 ↗
3. Enabling fast charging – a battery technology gap assessment10.1016/j.jpowsour.2017.06.055 ↗
4. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
5. Fast charging Li-ion batteries for a new era of electric vehicles10.1016/j.xcrp.2020.100212 ↗
6. Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles10.1016/j.jpowsour.2015.03.178 ↗
7. Lithium plating in a commercial lithium-ion battery – a low temperature aging study10.1016/j.jpowsour.2014.11.065 ↗
8. The effect of charging rate on the graphite electrode of commercial lithium-ion cells: a post-mortem study10.1016/j.jpowsour.2016.10.002 ↗
9. Prezas · 2016
10. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
11. Fast-charging effects on ageing for energy-optimized automotive LiNi1/3Mn1/3Co1/3O2/graphite prismatic lithium-ion cells10.1016/j.jpowsour.2019.02.095 ↗
12. You · 2019
13. Effects of fast charging at low temperature on a high energy li-ion battery10.1149/1945-7111/abc4bc ↗
14. Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction10.1016/j.jpowsour.2014.07.168 ↗
15. Influence of operational condition on lithium plating for commercial lithium-ion batteries – electrochemical experiments and post-mortem analysis10.1016/j.apenergy.2017.08.034 ↗
16. Low-temperature charging of lithium-ion cells Part I: electrochemical modeling and experimental investigation of degradation behavior10.1016/j.jpowsour.2013.12.022 ↗
17. Low-temperature charging of lithium-ion cells Part II: model reduction and application10.1016/j.jpowsour.2013.12.101 ↗
18. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries10.1016/j.jpowsour.2018.09.069 ↗
19. Popp · 2020 · 137/vols. 4–5 · 169
20. Impact of electrode and cell design on fast charging capabilities of cylindrical lithium-ion batteries10.1149/1945-7111/abb40c ↗
21. Comparison of the impact of fast charging on the cycle life of three lithium-ion cells under several parameters of charge protocol and temperatures10.1016/j.apenergy.2020.116344 ↗
22. Temperature dependent ageing mechanisms in lithium-ion batteries – a post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
23. Optimization of charging strategy by prevention of lithium deposition on anodes in high-energy lithium-ion batteries – electrochemical experiments10.1016/j.electacta.2015.08.056 ↗
24. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling10.1016/j.jpowsour.2010.07.071 ↗
25. Studies on LiFePO4 as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
26. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗
27. Modeling of degradation effects considering side reactions for a pouch type Li-ion polymer battery with carbon anode10.1016/j.jpowsour.2014.03.045 ↗
28. Cycle-life characterization of automotive lithium-ion batteries with LiNiO2 cathode10.1149/1.3126385 ↗
29. Separation of predominant processes in electrochemical impedance spectra of lithium-ion batteries with nickel-manganese-cobalt cathodes10.1016/j.jpowsour.2019.03.068 ↗
30. The effect of pore size distribution on the frequency dispersion of porous electrodes10.1016/S0013-4686(99)00436-3 ↗
31. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
32. Current density distribution in cylindrical Li-Ion cells during impedance measurements10.1016/j.jpowsour.2016.02.070 ↗
33. Olofsson · 2014 · 1
34. Electrochemical characterization and post-mortem analysis of aged LiMn2O4eLi(Ni0.5Mn0.3Co0.2)O2/graphite lithium ion batteries. Part I: cycle aging10.1016/j.jpowsour.2013.11.080 ↗
35. A mechanical aging mechanism in lithium-ion batteries10.1149/2.1001410jes ↗
36. Effect of center pin in free fall test for a cylindrical li-ion cell10.3795/KSME-A.2015.39.6.639 ↗
37. Design strategies for high power vs. high energy lithium ion cells10.3390/batteries5040064 ↗
38. Lithium ion battery anode aging mechanisms10.3390/ma6041310 ↗
39. Nonlinear aging characteristics of lithium-ion cells under different operational conditions10.1016/j.est.2015.05.003 ↗
40. Uneven film formation across depth of porous graphite electrodes in cycled commercial li-ion batteries10.1021/jp509665e ↗
41. Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions10.1016/j.jpowsour.2016.01.033 ↗
42. Review—SEI: past, present and future10.1149/2.1441707jes ↗
43. The formation and stability of the solid electrolyte interface on the graphite anode10.1016/j.jpowsour.2014.06.024 ↗
44. The correlation between the surface chemistry and the performance of li-carbon intercalation anodes for rechargeable "rocking-chair" type batteries10.1149/1.2054777 ↗
45. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells10.1016/j.jpowsour.2015.11.044 ↗
46. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
47. Effects of electrolyte composition on lithium plating in lithium-ion cells10.1149/1.3544439 ↗
48. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
49. How observable is lithium plating? Differential voltage analysis to identify and quantify lithium plating following fast charging of cold lithium-ion batteries10.1149/2.0821904jes ↗
50. Li plating as unwanted side reaction in commercial Li-ion cells – a review10.1016/j.jpowsour.2018.02.063 ↗
51. Review—recent advances and remaining challenges for lithium ion battery cathodes. I. Nickel-rich, LiNixCoyMnzO210.1149/2.0351701jes ↗
52. Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries10.1016/j.nanoen.2018.09.051 ↗
53. Identifying the origins of microstructural defects such as cracking within Ni-rich NMC811 cathode particles for lithium-ion batteries10.1002/aenm.202002655 ↗
54. Unveiling capacity degradation mechanism of li-ion battery in fast-charging process10.1002/celc.201902050 ↗
55. Degradation mechanism of Ni-enriched NCA cathode for lithium batteries: are microcracks really critical?10.1021/acsenergylett.9b00733 ↗
56. Cathode electrolyte interphase formation and electrolyte oxidation mechanism for Ni-rich cathode materials10.1021/acs.jpcc.0c02198 ↗
57. Formation and modification of cathode electrolyte interphase: a mini review10.1016/j.elecom.2020.106870 ↗
58. Cathode-electrolyte interphase in lithium batteries revealed by cryogenic electron microscopy
59. Impact of low temperature and charge profile on the aging of lithium-ion battery: non-invasive and post-mortem analysis10.1016/j.ijheatmasstransfer.2021.121024 ↗
60. Requirements for enabling extreme fast charging of high energy density li-ion cells while avoiding lithium plating10.1149/2.0451908jes ↗
61. Fast charging of li-ion cells: Part IV. Temperature effects and “safe lines” to avoid lithium plating10.1149/1945-7111/abb70d ↗
62. Key factors for the cycling stability of graphite intercalation electrodes for lithium-ion batteries10.1016/S0378-7753(99)00195-0 ↗
63. Highly conductive bridges between graphite spheres to improve the cycle performance of a graphite anode in lithium-ion batteries10.1016/j.jpowsour.2007.09.103 ↗
64. Effect of carbon nanotubes on the anode performance of natural graphite for lithium ion batteries10.1016/j.jpcs.2009.12.010 ↗
65. Electrochemical intercalation of lithium into graphite10.1149/1.2056228 ↗
66. A systematic study of kinetics in mesocarbon microbeads anodes in presence of nano-conductive additives10.1016/j.electacta.2018.12.006 ↗
67. Understanding composition and morphology of solid-electrolyte interphase in mesocarbon microbeads electrodes with nano-conducting additives10.1016/j.electacta.2020.136015 ↗
68. Stabilizing capacity retention of li-ion battery in fast-charge by reducing particle size of graphite
69. Enhanced fast charging and reduced lithium-plating by laser-structured anodes for lithium-ion batteries10.1149/2.1241915jes ↗
70. Efficient fast-charging of lithium-ion batteries enabled by laser-patterned three-dimensional graphite anode architectures10.1016/j.jpowsour.2020.228475 ↗
71. Methods for the production of electrodes and electrodes made using such a method
72. Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries10.1038/nenergy.2016.97 ↗
73. Butyronitrile-based electrolytes for fast charging of lithium-ion batteries10.3390/en12152869 ↗
74. Wide-temperature electrolytes for lithium-ion batteries10.1021/acsami.7b04099 ↗
75. Enabling fast charging of high energy density Li-ion cells with high lithium ion transport electrolytes10.1016/j.elecom.2019.04.013 ↗
76. Effects of solvent formulations in electrolytes on fast charging of Li-ion cells10.1016/j.electacta.2020.136453 ↗
77. The effect of electrolyte additives upon lithium plating during low temperature charging of graphite-LiNiCoAlO2 lithium-ion three electrode cells10.1149/1945-7111/ab6bc2 ↗
78. Advanced electrolytes for fast-charging high-voltage lithium-ion batteries in wide-temperature range10.1002/aenm.202000368 ↗
79. Electrolyte design for fast-charging li-ion batteries10.1016/j.trechm.2020.01.011 ↗
80. Enabling 6C fast charging of li-ion batteries with graphite/hard carbon hybrid anodes10.1002/aenm.202003336 ↗