Enhanced mass transport and water management of polymer electrolyte fuel cells via 3-D printed architectures
Source abstract
Abstract
Abstract H2–O2 polymer electrolyte fuel cells (PEFCs) represent one of the most promising next generation renewable energy conversion technologies. Two of the remaining unsolved key issues relate to inefficient mass transport and water management when working at high current densities. These problems arise from the structure of the existing flow fields and gas diffusion layers (GDLs), as well as the counter propagating flow directions of gas reactants and liquid products. To address these issues, we propose a novel design of an integrated flow field-gas diffusion layer (i-FF-GDL) generated by 3D printing of TiH2 followed by high temperature decomposition. In this new i-FF-GDL design, a porous Ti “bone” structure is used to drive water transport through capillary action, while regularly printed gaps transport gases. Benefiting from the separate gas and liquid flow channels, APEFCs using our i-FF-GDL design exhibit up to a 15% increase in peak power density (PPD) under H2-air (CO2 free) and H2–O2 conditions, when compared to traditional APEFCs. Operando electrochemical impedance spectroscopy (EIS) reveals that the enhanced performance arises largely from an increase in the mass transport. This work provides new insights and strategies for achieving high efficiency mass transport for fuel cells, water electrolyzers and related technologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Mench · 2008
2. A historical perspective of fuel cell technology in the 20th century10.1149/1.1488651 ↗
3. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
4. Pt–Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?10.1039/C4EE02564D ↗
5. Alkaline polymer electrolyte fuel cells stably working at 80 °C10.1016/j.jpowsour.2018.04.047 ↗
6. Composite poly(norbornene) anion conducting membranes for achieving Durability,Water management and high power (3.4 W/cm2) in hydrogen/oxygen alkaline fuel cells10.1149/2.1301910jes ↗
7. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
8. Development of Compact and high-performance fuel cell stack10.4271/2015-01-1175 ↗
9. Importance of balancing membrane and electrode water in anion exchange membrane fuel cells
10. Anion exchange membrane fuel cells: current status and remaining challenges10.1016/j.jpowsour.2017.08.010 ↗
11. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
12. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes ↗
13. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
14. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
15. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
16. Steady state and transient simulation of anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.012 ↗
17. Durability challenges of anion exchange membrane fuel cells10.1039/D0EE01133A ↗
18. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
19. A review of polymer electrolyte membrane fuel cells: technology, applications and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
20. A review of the gas diffusion layer in proton exchange membrane fuel cells: durability and degradation10.1016/j.apenergy.2015.06.068 ↗
21. A review of gas diffusion layer in PEM fuel cells: materials and designs10.1016/j.ijhydene.2011.12.148 ↗
22. Polymer electrolyte membrane fuel cell (PEMFC) flow field plate: design, materials and characterisation10.1002/fuce.201000033 ↗
23. Effect of carbon fiber paper made from carbon felt with different yard weights on the performance of low temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2008.01.094 ↗
24. Analysis of water transport in anisotropic gas diffusion layers for improved flooding performance of PEFC10.1149/2.1051910jes ↗
25. Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance10.1016/j.electacta.2004.07.017 ↗
26. Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells10.1016/j.electacta.2006.11.012 ↗
27. Performance of a metallic gas diffusion layer for PEM fuel cells10.1016/j.jpowsour.2007.10.055 ↗
28. Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell10.1016/j.jpowsour.2007.11.080 ↗
29. Laser perforated fuel cell diffusion media. Part I: related changes in performance and water content10.1016/j.jpowsour.2011.01.014 ↗
30. Effect of perforation structure of cathode GDL on liquid water removal in PEFC10.1149/05801.1047ecst ↗
31. Improvement of oxygen diffusion characteristic in gas diffusion layer with planar-distributed wettability for polymer electrolyte fuel cell10.1016/j.jpowsour.2014.05.151 ↗
32. L. Y. Sung, K. L. Hsueh, Y. Y. Yan, S. M. He, S. C. Yen, Gas Diffusion Layer, Manufacturing Apparatus and Manufacturing Method Thereof, US 2008/0166542 A1, July 10, 2008.
33. P. Wilde , R. B. Schweiss, Gas Diffusion Layer, US 8372557 B2, February 12, 2013.
34. D. R. Mekala, D. W. Stewink, M. M. David, J. W. Frisk, Fuel Cell Gas Diffusion Layer, WO 2005/034271 A2, April 14, 2005.
35. Engineered water highways in fuel cells: radiation grafting of gas diffusion layers10.1002/adma.201503557 ↗
36. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell10.1016/j.ijhydene.2012.07.076 ↗
37. A lung-inspired approach to scalable and robust fuel cell design10.1039/C7EE02161E ↗
38. Enhancement of mass transport in fuel cells using three-dimensional graphene foam as flow field10.1016/j.electacta.2018.01.191 ↗
39. A PEM fuel cell with metal foam as flow distributor10.1016/j.enconman.2012.03.018 ↗
40. IV performance improvement of polymer electrolyte fuel cell with porous channel
41. Multi‐phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field10.1002/er.4215 ↗
42. Titanium with controllable pore fractions by thermoreversible gelcasting of TiH210.1016/j.actamat.2008.06.035 ↗
43. Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes10.1126/science.1168375 ↗
44. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
45. Printed origami structures10.1002/adma.200904232 ↗
46. 3D printing of interdigitated Li-ion microbattery architectures10.1002/adma.201301036 ↗
47. Comparison of density measurement techniques for additive manufactured metallic parts10.1108/13552541111156504 ↗
48. Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique-A review10.1016/j.jpowsour.2013.04.011 ↗
49. Alkaline polymer electrolyte fuel cells without anode humidification and H2 emission10.1016/j.jpowsour.2020.228471 ↗
50. Unraveling mysteries of hydrogen electrooxidation in anion exchange membrane fuel cells