Investigation on the temperature uniformity and efficiency of cold start-up for proton exchange membrane fuel cell stack based on catalytic hydrogen/oxygen method
Source abstract
Abstract
Abstract The catalytic hydrogen/oxygen reaction method is one of the primary ways to realize the rapid cold start of proton exchange membrane fuel cell (PEMFC). In this study, the start-up capacity of the catalytic hydrogen/oxygen reaction method is systematically investigated. A tremendous nonuniformity of temperature distribution is found under the condition of one-way mixture gas supply. A reverse feeding unit (RFU) is invented to realize a double-way gas supply to solve this problem. With the aid of RFU, the temperature uniformity during cold start is greatly improved. When the flow rate is 30 L min−1 and air fraction is 24%, the average and the lowest temperature take 55 s and 79 s respectively to rise from −32 °C to 0 °C, and the maximum temperature variance is 12.6. However, the lowest temperature of stack only arrives at −11.8 °C in 79 s when one-way mixture gas is supplied, and the temperature variance evidently increase to 21.4. After the preheating period, the output performance using RFU is 6.01% higher than the one-way gas supply method when the loading current is 250 mA cm−2. The temperature uniformity and power output is improved remarkably by the RFU.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
2. Materials, technological status, and fundamentals of PEM fuel cells - a review10.1016/j.mattod.2019.06.005 ↗
3. A comprehensive review of solutions and strategies for cold start of automotive proton exchange membrane fuel cells10.1109/ACCESS.2016.2597058 ↗
4. Temperature distribution on the MEA surface of a PEMFC with serpentine channel flow bed10.1016/j.jpowsour.2005.08.012 ↗
5. Rapid cold start of proton exchange membrane fuel cells by the printed circuit board technology10.1016/j.ijhydene.2014.09.065 ↗
6. Degradation effects in polymer electrolyte membrane fuel cell stacks by sub-zero operation—an in situ and ex situ analysis10.1016/j.jpowsour.2008.03.074 ↗
7. Investigation of freeze/thaw durability in polymer electrolyte fuel cells10.1016/j.ijhydene.2010.04.079 ↗
8. Three-dimensional multiphase modeling of cold start processes in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.072 ↗
9. Wheat · 2004
10. Lin · 2009
11. Wheat W S, Meltser M A, Masten D A. Fuel Cell Energy Management System for Cold Environments: U.S. Patent 6,727,013.
12. Abe · 2004
13. Passive thermal management for PEM fuel cell stack under cold weather condition using phase change materials (PCM)10.1016/j.applthermaleng.2013.04.064 ↗
14. Hydrogen catalytic combustion over a Pt/Ce0.6Zr0.4O2/MgAl2O4 mesoporous coating monolithic catalyst10.1016/j.ijhydene.2012.05.073 ↗
15. Cold-start method for proton-exchange membrane fuel cells based on locally heating the cathode10.1016/j.apenergy.2019.113716 ↗
16. Proton exchange membrane fuel cell subzero start-up with hydrogen catalytic reaction assistance10.1016/j.jpowsour.2019.02.092 ↗
17. Effects of reverse voltage and subzero startup on the membrane electrode assembly of a PEMFC10.1016/j.jpowsour.2006.11.070 ↗
18. Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell10.1016/j.jpowsour.2009.12.016 ↗
19. A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding10.1016/j.jpowsour.2003.11.081 ↗
20. Low temperature durability and consistency analysis of proton exchange membrane fuel cell stack based on comprehensive characterizations10.1016/j.apenergy.2020.114626 ↗
21. Temperature effects in polymer electrolyte membrane fuel cells10.1002/celc.202000588 ↗
22. Experimental study on different preheating methods for the cold-start of PEMFC stacks10.1016/j.energy.2018.08.003 ↗
23. Measurements of thermal properties of carbon/epoxy and glass/epoxy using modulated temperature differential scanning calorimetry10.1177/0021998304038647 ↗