journal article·2021-04Open access

Operando calorimetry informs the origin of rapid rate performance in microwave-prepared TiNb 2 O 7 electrodes

Sun Woong Baek, Kira E. Wyckoff, Danielle M. Butts, Jadon Bienz, Ampol Likitchatchawankun, Molleigh B. Preefer, Matevž Frajnkovič, Bruce S. Dunn, Ram Seshadri, Laurent Pilon

Abstract

The shear-phase compound TiNb 2 O 7 has recently emerged as a safe and high-volumetric density replacement for graphite anodes in lithium ion batteries. An appealing feature of TiNb 2 O 7 is that it retains capacity even at high cycling rates. Here, we demonstrate that phase pure and crystalline TiNb 2 O 7 can be rapidly prepared using a high-temperature microwave synthesis method. Studies of the charging and discharging of this material, including through operando calorimetry, permit key thermodynamic parameters to be revealed. The nature of heat generation is dominated by Joule heating, which sensitively changes as the conductivity of the electrode increases with increasing lithiation. The enthalpy of mixing, obtained from operando calorimetry, is found to be small across the different degrees of lithiation, pointing to the high rate of lithium ion diffusion at the origin of rapid rate performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Electronics for the human body10.1001/jama.2014.17915 ↗
2. Toward flexible batteries10.1126/science.1151831 ↗
3. Ultralight cut-paper-based self-charging power unit for self-powered portable electronic and medical systems10.1021/acsnano.7b00866 ↗
4. Enabling fast charging – vehicle considerations10.1016/j.jpowsour.2017.07.093 ↗
5. Challenges and benefits of post-lithium-ion batteries10.1039/C9NJ05682C ↗
6. Carbon materials for lithium-ion rechargeable batteries10.1016/S0008-6223(98)00290-5 ↗
7. Improved graphite anode for lithium-ion batteries chemically bonded solid electrolyte interface and nanochannel formation10.1149/1.1836372 ↗
8. Challenges for rechargeable li batteries10.1021/cm901452z ↗
9. On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries
10. Nanostructured anode material for high-power battery system in electric vehicles10.1002/adma.201000441 ↗
11. A long-life lithium-ion battery with a highly porous TiNb2O7 anode for large-scale electrical energy storage10.1039/C4EE00508B ↗
12. Graphitic carbon conformal coating of mesoporous TiO2 hollow spheres for high-performance lithium ion battery anodes10.1021/jacs.5b08743 ↗
13. Preparation and electrochemical properties of Ag-modified TiO2 nanotube anode material for lithium–ion battery10.1016/j.elecom.2006.10.008 ↗
14. Facile synthesis of nanocrystalline TiO2 mesoporous microspheres for lithium-ion batteries10.1021/jp1087509 ↗
15. High power lithium-ion hybrid electrochemical capacitors using spinel LiCrTiO4 as insertion electrode10.1039/c2jm32970k ↗
16. Lithium chromium oxide modified spinel LiCrTiO4 with improved electrochemical properties10.1039/c2jm32673f ↗
17. Nitridation-driven conductive Li4Ti5O12 for lithium ion batteries10.1021/ja806104n ↗
18. Porous Li4Ti5O12 coated with N-doped carbon from ionic liquids for Li-ion batteries10.1002/adma.201003294 ↗
19. The preparation and characterization of Li4Ti5O12/carbon nano-tubes for lithium ion battery10.1016/j.electacta.2008.05.031 ↗
20. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: The latest advancements and future perspectives10.1016/j.mser.2015.10.001 ↗
21. New anode framework for rechargeable lithium batteries10.1021/cm200441h ↗
22. High-energy, fast-charging, long-life lithium-ion batteries using tinb2o7 anodes for automotive applications10.1016/j.jpowsour.2018.06.059 ↗
23. Atomic-scale investigation on lithium storage mechanism in TiNb2O710.1039/c0ee00808g ↗
24. Large lithium storage in highly crystalline TiNb2O7 nanoparticles synthesized by a hydrothermal method as anodes for lithium-ion batteries10.1016/j.ssi.2018.02.027 ↗
25. Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors10.1007/s10973-013-3599-9 ↗
26. Probing the thermal effects of voltage hysteresis in anionic redox-based lithium-rich cathodes using isothermal calorimetry10.1038/s41560-019-0410-6 ↗
27. Modeling of lithium-ion batteries10.1016/S0378-7753(03)00282-9 ↗
28. A general energy balance for battery systems10.1149/1.2113792 ↗
29. Lithium difluorophosphate as an additive to improve the low temperature performance of LiNi0.5Co0.2Mn0.3O2/graphite cells10.1016/j.electacta.2016.10.037 ↗
30. Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data10.1016/j.jpowsour.2012.05.012 ↗
31. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation10.1016/j.jpowsour.2010.12.102 ↗
32. Temperature effect and thermal impact in lithium-ion batteries: A review10.1016/j.pnsc.2018.11.002 ↗
33. Characteristics of lithium-ion battery with non-flammable electrolyte10.1016/j.jpowsour.2009.02.010 ↗
34. A measurement method for determination of dc internal resistance of batteries and supercapacitors10.1016/j.elecom.2009.12.004 ↗
35. Thermal modeling of porous insertion electrodes10.1149/1.1531194 ↗
36. Heats of mixing and of entropy in porous insertion electrodes10.1016/S0378-7753(03)00283-0 ↗
37. Protocols for high temperature assisted-microwave preparation of inorganic compounds10.1021/acs.chemmater.9b02594 ↗
38. TOPAS and TOPAS-academic: an optimization program integrating computer algebra and crystallographic objects written in C++10.1107/S1600576718000183 ↗
39. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
40. Effect of entropy change of lithium intercalation in cathodes and anodes on li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
41. Potentiometric measurement of entropy change for lithium batteries10.1039/C6CP08505A ↗
42. Quantifying structure dependent responses in Li-ion cells with excess Li spinel cathodes: matching voltage and entropy profiles through mean field models10.1039/C8CP02989J ↗
43. Isothermal calorimeter for measurements of time-dependent heat generation rate in individual supercapacitor electrodes10.1016/j.jpowsour.2017.11.012 ↗
44. Ionic and electronic conduction in TiNb2O7
45. TiNb2O7 nanoparticles assembled into hierarchical microspheres as high-rate capability and long-cycle-life anode materials for lithium ion batteries10.1039/C4NR04847D ↗
46. Intercalation pseudo-capacitive TiNb2O7@ carbon electrode for high-performance lithium ion hybrid electrochemical supercapacitors with ultrahigh energy density10.1016/j.nanoen.2015.04.011 ↗
47. CoxP compounds: electrochemical conversion/partial recombination reaction and partially disproportionated nanocomposite for Li-ion battery anodes10.1039/C4RA07885C ↗
48. TiNb2O7 hollow nanofiber anode with superior electrochemical performance in rechargeable lithium ion batteries10.1016/j.nanoen.2017.05.057 ↗
49. Lithium intercalation in TiS210.1016/0025-5408(79)90002-3 ↗
50. Cycling-induced changes in the entropy profiles of lithium cobalt oxide electrodes10.1149/2.0071503jes ↗
51. Defects and transport properties in TiNb2O710.1111/jace.12558 ↗
52. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
53. Li+ insertion/extraction properties for TiNb2O7 single particle characterized by a particle-current collector integrated microelectrode10.1149/2.0241903jes ↗
54. Studies on kinetics and diffusion characteristics of lithium ions in TiNb2O7