journal article·2021-01Open access

Prediction of compression force evolution over degradation for a lithium-ion battery

Eunji Kwak, Siheon Jeong, Jun-hyeong Kim, Ki-Yong Oh

Abstract

Abstract This study proposes a method to predict the evolution of compression force during the degradation of a lithium-ion battery under packed conditions. The total compression force comprises irreversible and reversible forces. The former is estimated using a multivariate machine learning method, whereas the latter is estimated by combining machine learning and phenomenological modeling. For predicting the irreversible force, impedance-related features are extracted and their correlations with the evolution of the irreversible force are quantitatively analyzed using Grey relational analysis. Subsequently, features with high Grey relational grades are employed as representative health indicators for multivariate inputs of Gaussian process regression. For predicting the reversible force, the force evolution during the charge/discharge period is predicted using a phenomenological force model. The equivalent stiffness used in this model is separately estimated depending on the state of charge (SOC) to account for the inherent characteristics of phase transition and different degradation behaviors. The evolution of equivalent stiffness under high SOC shows nonlinearity but weak evolution characteristics, whereas those under low and medium SOCs show linearity but strong evolution characteristics. Finally, the proposed method is used to enable control and design for two potential applications: estimations of the state of health-dependent SOC and separator compression.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A review of lithium deposition in lithium-ion and lithium metal secondary batteries10.1016/j.jpowsour.2013.12.099 ↗
2. A review on lithium-ion batteries safety issues, existing problems and possible solutions10.1166/mex.2012.1075 ↗
3. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
4. Probability based remaining capacity estimation using data-driven and neural network model10.1016/j.jpowsour.2016.03.054 ↗
5. Residual lifetime prediction for lithium-ion battery based on functional principal component analysis and Bayesian approach10.1016/j.energy.2015.07.022 ↗
6. Particle swarm optimization-based optimal power management of plug-in hybrid electric vehicles considering uncertain driving conditions10.1016/j.energy.2015.12.071 ↗
7. A review of power battery thermal energy management10.1016/j.rser.2011.07.096 ↗
8. Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling10.1016/j.enconman.2016.08.063 ↗
9. Online identification of lithium-ion battery parameters based on an improved equivalent-circuit model and its implementation on battery state-of-power prediction10.1016/j.jpowsour.2015.01.154 ↗
10. The characterization of dynamic behavior of Li-ion battery packs for enhanced design and states identification10.1016/j.enconman.2018.02.022 ↗
11. Phenomenological force and swelling models for rechargeable lithium-ion battery cells10.1016/j.jpowsour.2016.01.103 ↗
12. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
13. A method for joint estimation of state-of-charge and available energy of LiFePO4 batteries10.1016/j.apenergy.2014.08.081 ↗
14. Characterization and modeling of thermal mechanics of lithium-ion battery cells10.1016/j.apenergy.2016.06.069 ↗
15. A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as Li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems10.1016/j.jpowsour.2017.03.042 ↗
16. Thermal conductivity inside prismatic lithium-ion cells with dependencies on temperature and external compression pressure10.1016/j.est.2020.101680 ↗
17. The effect of pressure on thermal conductivity of polymer melts10.1016/j.polymertesting.2005.10.001 ↗
18. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
19. Battery capacity fading estimation using a force-based incremental capacity analysis10.1149/2.0511608jes ↗
20. Effects of cycling ranges on stress and capacity fade in lithium-ion pouch cells10.1149/2.1131610jes ↗
21. Liu · 2017
22. Characterization of the mechanical responses of a LiFePO4 battery under different operating conditions10.1016/j.est.2020.101269 ↗
23. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
24. Characterising lithium-ion battery degradation through the identification and tracking of electrochemical battery model parameters10.3390/batteries2020013 ↗
25. Differential voltage analysis as a tool for analyzing inhomogeneous aging: a case study for LiFePO4/graphite cylindrical cells10.1016/j.jpowsour.2017.09.059 ↗
26. A novel Gaussian process regression model for state-of-health estimation of lithium-ion battery using charging curve10.1016/j.jpowsour.2018.03.015 ↗
27. Steinbuch
28. Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis10.1007/s00170-004-2386-y ↗
29. TEM study of fracturing in spherical and plate-like LiFePO4 particles10.1149/1.2826746 ↗
30. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells10.1016/j.jpowsour.2013.08.056 ↗
31. Failure analysis of pinch-torsion tests as a thermal runaway risk evaluation method of Li-ion cell10.1016/j.jpowsour.2014.04.040 ↗
32. Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse10.1016/j.jpowsour.2015.04.162 ↗
33. A novel phenomenological multi-physics model of Li-ion battery cells10.1016/j.jpowsour.2016.07.019 ↗
34. A multiscale framework with extended Kalman filter for lithium-ion battery SOC and capacity estimation10.1016/j.apenergy.2011.08.002 ↗
35. H. Movahedi, M.A. Figueroa-Santos, J.B. Siegel, A.G. Stefanopoulou, R. Rajamani, Hybrid nonlinear observer for battery state-of-charge estimation using nonmonotonic force measurements, Advanced Control for Applications: Engineering and Industrial Systems e38.
36. Lithium concentration dependent elastic properties of battery electrode materials from first principles calculations10.1149/2.0031411jes ↗