journal article·2020-12Open access

New synthesis strategies to improve Co-Free LiNi0.5Mn0.5O2 cathodes: Early transition metal d0 dopants and manganese pyrophosphate coating

Devendrasinh Darbar, Ethan C. Self, Linze Li, Chongmin Wang, Harry M. Meyer, Changwook Lee, Jason R. Croy, Mahalingam Balasubramanian, Nitin Muralidharan, Indranil Bhattacharya, Ilias Belharouak, Jagjit Nanda

Abstract

Abstract In this work, we report solution-based doping and coating strategies to improve the electrochemical performance of the Co-free layered oxide cathode LiNi0.5Mn0.5O2 (NM-50/50). Small amounts of d0 dopants (e.g., Mo6+and Ti4+, 0.5–1 at. %) increase the cathode's specific capacity, cycling stability, and rate capability. For example, a Mo-doped cathode with the nominal composition LiNi0.495Mn0.495Mo0.01O2 exhibits a high reversible capacity of 180 mA h/g at 20 mA/g compared to only 156 mA h/g for undoped NM-50/50. Effects of 1 at.% Mo dopant on the cathode structure were studied using a suite of characterization tools including X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy. These measurements demonstrate that Mo6+ dopant is enriched near the particle surface and improves the electrochemical performance of LiNi0.5Mn0.5O2 by: (i) reducing Li+/Ni2+ cation mixing which facilitates Li+ transport, (ii) mitigating undesirable phase transformations near the cathode surface, and (iii) altering the cathode/electrolyte interfacial chemistry. This work also reports the use of an inorganic Mn2P2O7 coating which enhances the cycling stability of Mo-doped NM-50/50, presumably through formation of a stable cathode electrolyte interphase (CEI) layer. Overall, the synthesis approaches reported herein are quite general and can potentially be expanded to other high voltage Li-ion battery cathodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Layered lithium insertion material of LiNi 1/2 Mn 1/2 O 2 : a possible alternative to LiCoO 2 for advanced lithium-ion batteries10.1246/cl.2001.744 ↗
2. Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗
3. Structural and chemical characterization of layered Li1-XNi 1-YMnyO2-δ (y = 0.25 and 0.5, and 0 ≤ (1 - x) ≤ 1) oxides10.1021/cm034757b ↗
4. Structural change of Li 1− x Ni 0.5 Mn 0.5 O 2 ccathode materials for lithium-ion batteries by synchrotron radiation10.1246/cl.2003.60 ↗
5. Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries10.1246/cl.2001.642 ↗
6. Understanding the role of minor molybdenum doping in LiNi0.5Co0.2Mn0.3O2 electrodes: from structural and surface analyses and theoretical modeling to practical electrochemical cells10.1021/acsami.8b09795 ↗
7. Improving performance of LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium-ion batteries by doping with molybdenum-ions: theoretical and experimental studies10.1021/acsaem.9b00767 ↗
8. Synthesis and electrochemical and structural investigations of oxidatively stable Li2MoO3 and XLi2MoO3·(1 - X)LiMO2 composite cathodes10.1021/acs.chemmater.8b01408 ↗
9. Electronic-structure origin of cation disorder in transition-metal oxides10.1103/PhysRevLett.119.176402 ↗
10. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT
11. Comparative study of LiCoO2, LiNi1 2Co1 2O2 and LiNiO2 for 4 volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗
12. Atomic-scale mechanisms of enhanced electrochemical properties of Mo-doped Co-free layered oxide cathodes for lithium-ion batteries10.1021/acsenergylett.9b01830 ↗
13. Synthesis and characterization of LiNi1/3Mn1/3Co 1/3O2 by wet-chemical method. Electrochim
14. Local cationic environment in lithium nickel–cobalt oxides used as cathode materials for lithium batteries10.1016/S0167-2738(00)00503-8 ↗
15. Structural and electrochemical properties of LiNi[sub 0.5]Mn[sub 0.5]O[sub 2] thin-film electrodes prepared by pulsed laser deposition10.1149/1.3294719 ↗
16. Characterization of diamond films by Raman spectroscopy10.1557/JMR.1989.0385 ↗
17. Deconvolution of Mo 3d X-ray photoemission spectraγ-Mo4O11: agreement with prediction from bond length-bond strength relationships10.1007/BF01730497 ↗
18. ESCA studies of metal-oxygen surfaces using argon and oxygen ion-bombardment10.1016/0368-2048(74)85023-1 ↗
19. X-ray photoelectron spectroscopy of molybdenum compounds. Use of electron spectroscopy for chemical analysis (ESCA) in quantitative analysis10.1021/ac60307a020 ↗
20. Use of X‐ray photoelectron spectroscopy to study bonding in Cr, Mn, Fe, and Co compounds10.1063/1.1678348 ↗
21. XPS study of MnO oxidation10.1016/0368-2048(89)80009-X ↗
22. X-ray photoelectron spectroscopy of manganese—oxygen systems10.1016/0368-2048(75)85010-9 ↗
23. Chemisorption and the initial stage of oxidation on Mn10.1016/0039-6028(81)90533-1 ↗
24. An X-ray photoelectron spectroscopic investigation of the oxidation of manganese10.1080/01418618408233293 ↗
25. XRD and XPS characterization of mixed valence Mn3O4 hausmannite thin films prepared by chemical spray pyrolysis technique10.1016/j.apsusc.2009.11.051 ↗
26. Novel synthesis of layered LiNi 1/2 Mn 1/2 O 2 as cathode material for lithium rechargeable cells10.1016/j.electacta.2003.09.034 ↗
27. Size analysis and identification of particles
28. Structural environments around molybdenum in silicate glasses and melts. I. Influence of composition and oxygen fugacity on the local structure of molybdenum10.2113/gscanmin.44.3.731 ↗
29. Li2MnO3-Based composite cathodes for lithium batteries: a novel synthesis approach and new structures10.1016/j.elecom.2011.06.037 ↗
30. Morphology, structure, and electrochemistry of solution-derived LiMn 0.5−x Cr 2x Ni 0.5−x O 2 for lithium-ion cells10.1149/1.3125702 ↗
31. Quantifying hysteresis and voltage fade in XLi 2 MnO 3 • (1-x)LiMn 0.5 Ni 0.5 O 2 electrodes as a function of Li 2 MnO 3 content10.1149/2.049403jes ↗
32. formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
33. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
34. Electrolyte reactions with the surface of high voltage LiNi 0.5Mn1.5O4 cathodes for lithium-ion batteries10.1149/1.3428515 ↗
35. SEI formation and interfacial stability of a Si electrode in a LiTDI-salt based electrolyte with FEC and VC additives for Li-ion batteries10.1021/acsami.6b02650 ↗
36. How the negative electrode influences interfacial and electrochemical properties of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathodes in Li-ion batteries10.1149/2.0711713jes ↗
37. Fluorinated carbonate-based electrolyte for high-voltage Li(Ni 0.5 Mn 0.3 Co 0.2)O2/graphite lithium-ion battery10.1149/2.0591701jes ↗
38. Influence of temperature on the interface chemistry of LixMn2O4 electrodes10.1021/la011354m ↗
39. 2005
40. The cathode-electrolyte interface in the Li-ion battery
41. MnPO4-Coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics