Statistical optimization of process parameters in microbial fuel cell for enhanced power production using Sulphonated Polyhedral Oligomeric Silsesquioxane dispersed Sulphonated Polystyrene Ethylene Butylene Polystyrene nanocomposite membranes
Source abstract
Abstract
Abstract Novel Proton Exchange Membranes (PEMs) comprising Sulphonated Polyhedral Oligomeric Silsesquioxane (SPOSS) incorporated on Sulphonated Polystyrene Ethylene Butylene Polystyrene (SPSEBS) nanocomposites are prepared in different weight percentage of nano fillers (2–8%) by solution casting method. The successful sulphonation of the SPSEBS and SPOSS is confirmed by various characterization techniques. SPSEBS +6% SPOSS membrane exhibit the highest IEC value, water uptake and proton conductivity. Response Surface Methodology (RSM) is used to determine the effect of pH, substrate concentration and variation in anode material with SPSEBS + 6% SPOSS membrane for the performance in a fabricated tubular Microbial Fuel Cell (MFC) of 300 mL volume. The ideal concentration of each parameter is investigated and from the optimized conditions the highest maximum power density of 126 mW/m2 is obtained in STAT 13 at pH 7 with 75% substrate concentration using graphite rod as an electrode material after 3 weeks of operation time. In addition, initial biofilm studies are performed. The results of this study suggest a regression equation for optimizing the process parameters in addition to a new hybrid nanocomposite membrane fabricated for the first time which could be an appropriate PEM for the MFC system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Microbial Fuel Cells and Bioremediation · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell10.1016/j.ijhydene.2014.10.026 ↗
2. Facile synthesis of nitrogen and fluorine co-doped carbon materials as efficient electrocatalysts for oxygen reduction reactions in air-cathode microbial fuel cells10.1039/C4TA06500J ↗
3. Preparation of tungstic acid functionalized titanium oxide nanotubes and its effect on proton exchange membrane fuel cell10.1007/s42452-019-0358-y ↗
4. Comparative study of different fuel cell technologies10.1016/j.rser.2011.09.020 ↗
5. Production of electricity during wastewater treatment using a single chamber microbial fuel cell10.1021/es034923g ↗
6. Microbial fuel cells: from fundamentals to applications. A review10.1016/j.jpowsour.2017.03.109 ↗
7. Carbon felt molecular modification and biofilm augmentation via quorum sensing approach in yeast-based microbial fuel cells10.1016/j.apenergy.2019.01.078 ↗
8. Green technology in wastewater treatment technologies: integration of membrane bioreactor with various wastewater treatment systems10.1016/j.cej.2015.07.060 ↗
9. Investigation of different configurations of microbial fuel cells for the treatment of oilfield produced water10.1016/j.apenergy.2016.10.057 ↗
10. Improved performance of microbial fuel cells using sulfonated polyether ether ketone (SPEEK) TiO2–SO3H nanocomposite membrane10.1039/c3ra44212h ↗
11. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
12. Microbial fuel cells: recent developments in design and materials
13. Development of cation exchange resin-polymer electrolyte membranes for microbial fuel cell application10.1007/s10853-015-9167-x ↗
14. Characterization and performance study of sulfonated poly ether ether ketone/Fe3O4 nanocomposite membrane as electrolyte for microbial fuel cell10.1016/j.cej.2013.12.103 ↗
15. Tubular microbial fuel cells for efficient electricity generation10.1021/es050986i ↗
16. Development of MFC using sulphonated polyether ether ketone (SPEEK) membrane for electricity generation from waste water10.1016/j.biortech.2011.09.021 ↗
17. Nanocomposite SPEEK-based membranes for direct methanol fuel cells at intermediate temperatures10.1016/j.memsci.2015.05.055 ↗
18. A study of influence on nanocomposite membrane of sulfonated TiO2 and sulfonated polystyrene-ethylene-butylene-polystyrene for microbial fuel cell application10.1016/j.energy.2015.05.015 ↗
19. Electroactive microorganisms in bioelectrochemical systems10.1038/s41579-019-0173-x ↗
20. Characterization of bacterial and archaeal communities in air-cathode microbial fuel cells, open circuit and sealed-off reactors10.1007/s00253-013-5025-4 ↗
21. Nanocomposite membranes based on sulfonated polystyrene ethylene butylene polystyrene (SSEBS) and sulfonated SiO2 for microbial fuel cell application10.1016/j.cej.2015.12.095 ↗
22. Yang · 2008
23. Design of a PVDF-MFC force sensor for robot-assisted single cell microinjection10.1109/JSEN.2017.2701835 ↗
24. Fundamental studies on a new series of SPSEBS-PVA-QPSEBS bipolar membrane: membrane preparation and characterization10.1002/app.38098 ↗
25. Performance of sulfonated polystyrene–ethylene–butylene–polystyrene membrane in microbial fuel cell for bioelectricity production10.1016/j.jpowsour.2012.05.053 ↗
26. Direct synthesis of sulfonated mesoporous silica as inorganic fillers of proton-conducting organic–inorganic composite membranes10.1016/j.memsci.2010.04.024 ↗
27. Nafion®/sulfated zirconia oxide-nanocomposite membrane: the effects of ammonia sulfate on fuel permeability10.1007/s10965-019-1760-2 ↗
28. Synthesis and characterization of Nafion®-MO2 (M=Zr, Si, Ti) nanocomposite membranes for higher temperature PEM fuel cells10.1016/j.electacta.2005.05.016 ↗
29. Adjemian · 2002
30. Nafion–TiO2 composite DMFC membranes: physico-chemical properties of the filler versus electrochemical performance10.1016/j.electacta.2004.07.049 ↗
31. Fabrication and investigation of SiO2 supported sulfated zirconia/Nafion® self-humidifying membrane for proton exchange membrane fuel cell applications10.1016/j.jpowsour.2008.06.019 ↗
32. Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells10.1016/S0376-7388(02)00009-1 ↗
33. Design and properties of functional hybrid organic–inorganic membranes for fuel cells10.1039/c0cs00144a ↗
34. Composite polymer electrolyte containing ionic liquid and functionalized polyhedral oligomeric silsesquioxanes for anhydrous PEM applications10.1021/am900020w ↗
35. Performance optimisation of microbial fuel cell for wastewater treatment and sustainable clean energy generation using response surface methodology10.1016/j.aej.2018.02.012 ↗
36. Optimization of enhanced bioelectrical reactor with electricity from microbial fuel cells for groundwater nitrate removal10.1080/09593330.2015.1096962 ↗
37. A box–behnken design-based model for predicting power performance in microbial fuel cells using wastewater10.1080/00986445.2016.1236336 ↗
38. Towards the optimisation of ceramic-based microbial fuel cells: a three-factor three-level response surface analysis design10.1016/j.bej.2019.01.015 ↗
39. A comparison of membranes and enrichment strategies for microbial fuel cells10.1016/j.biortech.2011.02.003 ↗
40. Power generation using different cation, anion, and ultrafiltration membranes in microbial fuel cells10.1021/es062202m ↗
41. Federation · 2005
42. Preparation and characterization of polyhedral oligomeric silsesquioxane (POSS) using domestic microwave oven10.1016/j.jnoncrysol.2015.08.020 ↗
43. Anode and cathode materials characterization for a microbial fuel cell in half cell configuration10.2166/wst.2011.217 ↗
44. Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation10.1016/j.tca.2005.10.006 ↗
45. Functionalization of graphene oxide by radiation grafting polyhedral oligomeric silsesquioxane with improved thermal stability and hydrophilicity10.1007/s10853-019-04098-z ↗
46. Electric load forecasting by seasonal recurrent SVR (support vector regression) with chaotic artificial bee colony algorithm10.1016/j.energy.2011.07.015 ↗
47. Polyhedral oligomeric silsesquioxane/polyamide bio-nanocomposite membranes: structure-gas transport properties10.1039/C4RA12716A ↗
48. Anion exchange composite membrane based on octa quaternary ammonium Polyhedral Oligomeric Silsesquioxane for alkaline fuel cells10.1016/j.jpowsour.2017.06.053 ↗
49. Sublimation kinetics and diffusion coefficients of TNT, PETN, and RDX in air by thermogravimetry10.1016/j.talanta.2014.02.074 ↗
50. Effect of electrolyte pH on the rate of the anodic and cathodic reactions in an air-cathode microbial fuel cell10.1016/j.bioelechem.2008.07.007 ↗
51. Dynamic evolution of anodic biofilm when maturing under different external resistive loads in microbial fuel cells. Electrochemical perspective10.1016/j.jpowsour.2018.08.031 ↗
52. A bi-porous graphite felt electrode with enhanced surface area and catalytic activity for vanadium redox flow batteries10.1016/j.apenergy.2018.10.033 ↗
53. Microbial fuel cell-a source of renewable energy: a review10.1504/IJRET.2017.086808 ↗
54. Effect of biofilm formation on the performance of microbial fuel cell for the treatment of palm oil mill effluent10.1007/s00449-014-1239-9 ↗
55. Optimal biofilm formation and power generation in a micro-sized microbial fuel cell (MFC)10.1016/j.sna.2012.07.015 ↗
56. Silver-incorporated poly vinylidene fluoride nanofibers for bacterial filtration10.1080/02786826.2018.1554892 ↗
57. Characterization of membrane biofouling and its effect on the performance of microbial fuel cell10.1016/j.ijhydene.2015.09.037 ↗