journal article·2020-03

Degradation studies of ceria-based solid oxide fuel cells at intermediate temperature under various load conditions

You-Dong Kim, Jayoon Yang, John-In Lee, Muhammad Saqib, Ji-Seop Shin, Kwangho Park, Minkyeong Jo, Sun-Ju Song, Jun-Young Park

Publisher page

Abstract

Abstract Despite several disadvantages with the electronic conduction of ceria, researchers report the high performance of ceria-based solid oxide fuel cells (SOFCs) at intermediate temperatures with advanced cathode materials. However, it appears the long-term stability of ceria-based SOFCs in the anode-supported cell configuration have still not been proved experimentally at practical operating conditions. In particular, the chemical expansion of ceria electrolytes can cause potentially irreversible failure of SOFCs under large P O 2 gradients. Hence, we investigate the degradation behavior of NiO-Nd0.1Ce0.9O2-δ anode-supported cells with Nd0.1Ce0.9O2-δ electrolyte in dynamic electrical modes, load trip (0.7–0 A cm−2), load cycle (0.2–0.12 A cm−2), and constant load operation (0.2 A cm−2), at 650 °C. We identify the specific degradation phenomenon of ceria-based cells by analyzing the electrochemical characteristics in post-mortem investigations after durability testing under various electrical load conditions. Additionally, we suggest a possible operation strategy to mitigate the performance degradation of cells under various electrical stresses through understanding of the main degradation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Recent anode advances in solid oxide fuel cells10.1016/j.jpowsour.2007.06.086 ↗
3. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
4. Long-term testing of SOFC stacks at forschungszentrum julich10.1002/fuce.201200151 ↗
5. Pre-reforming of propane for low-temperature SOFCs10.1016/j.ssi.2003.12.004 ↗
6. Low-temperature SOFCs using biomass-produced gases as fuels10.1007/s10800-004-2053-x ↗
7. Determination of surface exchange coefficients of LSM, LSCF, YSZ, GDC constituent materials in composite SOFC cathodes10.1149/1.3555122 ↗
8. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
9. Strategies for lowering solid oxide fuel cells operating temperature10.3390/en20401130 ↗
10. Materials for lower temperature solid oxide fuel cells10.1023/A:1004881825710 ↗
11. Redox cycling of Ni-based solid oxide fuel cell anodes: a review10.1002/fuce.200600028 ↗
12. Functionally graded bismuth oxide/zirconia bilayer electrolytes for high-performance intermediate-temperature solid oxide fuel cells (IT-SOFCs)10.1021/acsami.6b16660 ↗
13. An efficient electron-blocking interlayer induced by metal ion diffusion for SOFC based on Y-doped ceria electrolyte10.1021/acsami.7b18924 ↗
14. Fabrication characteristics of SOFC single cell with thin LSGM electrolyte via tape-casting and co-sintering10.1016/j.jiec.2016.07.041 ↗
15. Transport properties of solid oxide electrolyte ceramics: a brief review10.1016/j.ssi.2004.06.015 ↗
16. Structural and defect studies in solid oxide electrolytes10.1016/0167-2738(92)90107-Z ↗
17. Physicochemical properties of rare earth doped ceria Ce0.9Ln0.1O1.95 (Ln = Nd, Sm, Gd) as an electrolyte material for IT-SOFC/SOEC10.1016/j.solidstatesciences.2013.03.020 ↗
18. Novel intermediate temperature ceramic fuel cells with doped ceria-based composite electrolytes10.1016/S0167-2738(02)00114-5 ↗
19. Stable ceria-based electrolytes for intermediate temperature-solid oxide fuel cells via hafnium oxide blocking layer10.1016/j.jallcom.2018.11.069 ↗
20. High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells10.1016/j.elecom.2009.05.041 ↗
21. A collaborative study of sintering and composite effects for a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ IT-SOFC cathode10.1039/C3RA45296D ↗
22. Understanding chemical expansion in non-stoichiometric oxides: ceria and zirconia case studies10.1002/adfm.201102648 ↗
23. Chemical expansion of solid oxide fuel cell materials: a brief overview10.1007/s10409-013-0045-y ↗
24. Chemically-induced stresses in gadolinium-doped ceria solid oxide fuel cell electrolytes10.1016/S0167-2738(96)00588-7 ↗
25. The effect of oxygen vacancy concentration on the elastic modulus of fluorite-structured oxides10.1016/j.ssi.2006.11.003 ↗
26. Degradation analysis of anode-supported intermediate temperature-solid oxide fuel cells under various failure modes10.1016/j.jpowsour.2014.11.077 ↗
27. Robust NdBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode material and its degradation prevention operating logic for intermediate temperature-solid oxide fuel cells10.1016/j.jpowsour.2016.09.080 ↗
28. Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic10.1149/2.1391809jes ↗
29. Dependence of open-circuit potential and power density on electrolyte thickness in solid oxide fuel cells with mixed conducting electrolytes10.1016/j.jpowsour.2010.10.034 ↗
30. Experimental and theoretical investigation of degradation mechanisms by particle coarsening in SOFC electrodes10.1002/fuce.200800192 ↗
31. Fast performance degradation of SOFC caused by cathode delamination in long-term testing10.1016/j.ijhydene.2010.05.005 ↗
32. Degradation mechanisms of La-Sr-Co-Fe-O3 SOFC cathodes10.1149/1.2266160 ↗
33. In situ study of electrochemical activation and surface segregation of the SOFC electrode material La0.75Sr0.25Cr0.5Mn0.5O3+/-δ10.1039/C1CP21743G ↗
34. LSM-YSZ interactions and anode delamination in solid oxide electrolysis cells10.1016/j.ijhydene.2012.08.104 ↗
35. Detailed characterization of anode-supported SOFCs by impedance spectroscopy10.1149/1.2433311 ↗
36. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
37. Use of a distribution function of relaxation times (DFRT) in impedance analysis of SOFC electrodes10.1016/j.ssi.2017.11.021 ↗
38. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
39. Degradation of anode supported cell (ASC) performance by Cr-poisoning10.1016/j.jpowsour.2010.10.033 ↗
40. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
41. Crystal structure, thermal expansion and electrical conductivity of perovskite oxides BaxSr1-xCo0.8Fe0.2O3-δ (0.3 <= x <= 0.7)10.1016/j.jeurceramsoc.2005.06.047 ↗
42. Structural, electrical, and electrochemical characteristics of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=Pr, Sm, Gd) as cathode materials in intermediate-temperature solid oxide fuel cells10.1002/ente.201600618 ↗
43. Effect of GDC interlayer on the degradation of solid oxide fuel cell cathode during accelerated current load cycling10.1016/j.ijhydene.2014.07.022 ↗
44. Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations10.1016/j.energy.2016.11.084 ↗
45. Defect equilibria and chemical expansion in non-stoichiometric undoped and gadolinium-doped cerium oxide10.1016/j.electacta.2008.09.026 ↗
46. Surface and bulk oxygen non-stoichiometry and bulk chemical expansion in gadolinium-doped cerium oxide10.1016/j.actamat.2009.04.017 ↗
47. The elastic modulus of pure and doped ceria10.1016/j.scriptamat.2010.09.021 ↗