Selective doping to relax glassified grain boundaries substantially enhances the ionic conductivity of LiTi2(PO4)3 glass-ceramic electrolytes
Source abstract
Abstract
Abstract Glass-ceramic electrolytes are promising for all-solid-state batteries, yet their enhanced ionic conductivity is not well understood. We investigate structural difference between ceramic and glass-ceramic Li1.3Al0.3Ti1.7(PO4)3 tuned by boron, which is found to enhance conductivities of glass-ceramics by one order of magnitude, yet reduces that of ceramics. Raman and Magic Angle Spinning Nuclear Magnetic Resonance spectra indicate boron are primarily contained in glass phase, while electron energy-loss spectroscopy and high-resolution transmission electron microscopy reveal inhomogeneous distribution of boron and glassified grain boundaries. This substantially reduces interfacial resistance at grain boundaries with little effect on bulk resistance, which is further supported by spatial and spectroscopic electrochemical strain microscopy. The grain boundary resistance of ceramics, on the other hand, is increased by boron. We thus establish that lower interfacial resistance at glassified grain boundaries is responsible for higher conductivity in glass-ceramics, while boron can relax their grain boundaries even further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Solid-state electrolyte anchored with a carboxylated azo compound for all-solid-state lithium batteries10.1002/anie.201804068 ↗
2. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
3. Mechanisms and properties of ion-transport in inorganic solid electrolytes10.1016/j.ensm.2017.08.015 ↗
4. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
5. Chemistry design towards a stable sulfide-based superionic conductor Li4Cu8Ge3S12
6. Accessing the bottleneck in all-solid state batteries, lithium-ion transport over the solid-electrolyte-electrode interface10.1038/s41467-017-01187-y ↗
7. New horizons for inorganic solid state ion conductors10.1039/C8EE01053F ↗
8. Non-equilibrium microstructure of Li1.4Al0.4Ti1.6(PO4)3 superionic conductor by spark plasma sintering for enhanced ionic conductivity10.1016/j.nanoen.2018.06.050 ↗
9. Composite electrolyte for all-solid-state lithium batteries: low-temperature fabrication and conductivity enhancement
10. Fast Li+ ion conduction in Li2O‐Al2O3‐TiO2‐SiO2‐P2O5 glass‐ceramics10.1111/j.1151-2916.1997.tb03070.x ↗
11. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
12. Lithium ion conductive glass ceramics in the system Li1.4Al0.4(Ge1-xTix)1.6(PO4)3 (x=0-1.0)10.1016/j.ssi.2004.05.009 ↗
13. Influence of B2O3 addition on the ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 glass ceramics10.1016/j.jpowsour.2013.04.137 ↗
14. Lithium ion‐conducting glass–ceramics of Li1.5Al0.5Ge1.5(PO4)3–xLi2O (x=0.0–0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
15. Interfacial engineering of solid electrolytes10.1016/j.jmat.2015.03.002 ↗
16. Fast interfacial ionic conduction in nanostructured glass ceramics10.1103/PhysRevLett.98.225901 ↗
17. Spark plasma sintering of LiTi2(PO4)3-based solid electrolytes10.1111/j.1551-2916.2005.00246.x ↗
18. An explanation of the microcrack formation in Li1.3Al0.3Ti1.7(PO4)3 ceramics10.1016/j.jeurceramsoc.2016.02.042 ↗
19. XPS and ionic conductivity studies on Li2O-Al2O3-(TiO2 or GeO2)-P2O5 glass-ceramics10.1016/S0167-2738(00)00500-2 ↗
20. Effect of heat treatment time on microstructure and electrical conductivity in LATP glass ceramics10.1063/1.4872744 ↗
21. Ac conductivity and transport studies in phosphate glasses with NASICON-type chemistry10.1016/0167-2738(95)00175-6 ↗
22. Separating bulk from grain boundary Li ion conductivity in the sol–gel prepared solid electrolyte Li1.5Al0.5Ti1.5(PO4)310.1039/C5TA06379E ↗
23. Atomic-scale origin of the large grain-boundary resistance in perovskite Li-Ion-Conducting solid electrolytes10.1039/c4ee00382a ↗
24. Stabilization of nanoscale quasi-liquid interfacial films in inorganic materials: a review and critical assessment10.1080/10408430701364388 ↗
25. Enhancement of the Li conductivity in LiF by introducing glass/crystal interfaces10.1002/adfm.201101798 ↗
26. Structure/property correlations in ion-conducting mixed-network former glasses: solid-state NMR studies of the system Na2O−B2O3−P2O510.1021/cm0628092 ↗
27. Thermal, structural and electrical study of boron-incorporated LATP glasses and glass-ceramics10.1016/j.ssi.2019.02.022 ↗
28. The effects of crystallization parameters on the ionic conductivity of a lithium aluminum germanium phosphate glass–ceramic10.1016/j.jpowsour.2009.11.037 ↗
29. Dependence of ionic conductivity on composition of fast ionic conductors Li1+xTi2-xAlx(PO4)3 , 0 ≤ x ≤ 0.7. A parallel NMR and electric impedance study10.1021/cm010528i ↗
30. Crystallization kinetics of superionic conductive Al (B, La)- incorporated LiTi2(PO4)3 glass-ceramics10.1111/jace.12094 ↗
31. A high-energy X-ray diffraction, 31P and 11B solid-state NMR study of the structure of aged sodium borophosphate glasses10.1016/j.matchemphys.2008.04.045 ↗
32. Influence of chromium content on the optical and electrical properties of Li1+xCrxTi2−x(PO4)310.1016/j.ssi.2013.04.001 ↗
33. Glass formation in the Na2O-TiO2-P2O5 system10.1006/jssc.1993.1051 ↗
34. Lithium La0.57Li0.33TiO3 perovskite and Li1.3Al0.3Ti1.7(PO4)3 Li-NASICON supported thick films electrolytes prepared by tape casting method10.1149/2.0881608jes ↗
35. Raman microspectrometry applied to the study of electrode materials for lithium batteries
36. Resolving fine electromechanical structure of collagen fibrils via sequential excitation piezoresponse force microscopy10.1088/1361-6528/ab0340 ↗
37. Mapping intrinsic electromechanical responses at the nanoscale via sequential excitation scanning probe microscopy empowered by deep data10.1093/nsr/nwy096 ↗
38. Strain-based scanning probe microscopies for functional materials, biological structures, and electrochemical systems10.1016/j.jmat.2015.03.001 ↗
39. High resolution quantitative piezoresponse force microscopy of BiFeO3 nanofibers with dramatically enhanced sensitivity10.1039/C1NR11099C ↗
40. Delineating local electromigration for nanoscale probing of lithium ion intercalation and extraction by electrochemical strain microscopy
41. Real space mapping of Li-ion transport in amorphous Si anodes with nanometer resolution10.1021/nl101439x ↗
42. Li transport in fresh and aged LiMn2O4 cathodes via electrochemical strain microscopy10.1063/1.4927816 ↗
43. Temperature-dependent lithium-ion diffusion and activation energy of Li1.2Co0.13Ni0.13Mn0.54O2 thin-film cathode at nanoscale by using electrochemical strain microscopy10.1021/acsami.6b16321 ↗
44. Imaging space charge regions in Sm-doped ceria using electrochemical strain microscopy
45. Dual-frequency resonance-tracking atomic force microscopy10.1088/0957-4484/18/47/475504 ↗