journal article·2019-10Open access

Suitability of physicochemical models for embedded systems regarding a nickel-rich, silicon-graphite lithium-ion battery

J. Sturm, S. Ludwig, J. Zwirner, C. Ramirez-Garcia, B. Heinrich, M.F. Horsche, A. Jossen

Abstract

Abstract Local inhomogeneous electrode utilization in recent lithium-ion batteries tends to increase due to larger sizes and/or higher densification, which poses a challenge for accurate, model-based monitoring. Pseudo-two dimensional (p2D) physicochemical models (PCM) can offer such locality via calculating local potentials and concentrations through the thickness of the electrode stack and are numerically reduced for implementation in a microcontroller in this work. Finite difference method combined with solid-diffusion approximations and orthogonal collocation reformulation are applied to generate three MATLAB- and three microcontroller-suitable C -code p2D-PCMs, which are experimentally validated towards constant current charge/discharge and driving cycle loads on a high-energy NMC-811/SiC-18650 lithium-ion battery. Benchmarking to an equivalent circuit model reveals similar mean cell voltage errors below 20 mV for the driving cycle. Reducing spatial elements reveals errors below 1% for local ( i.e. concentrations/potentials) and global states ( i.e. cell voltage/temperature) and is applied to speed-up the C -code p2D-PCMs in the microcontroller (max. 168 MHz with 192 kB RAM) to calculate at least 37% faster than real-time. Real-time computability is investigated via varying processor frequencies and using hardware acceleration schemes. The memory allocation to solve and store the p2D-PCMs on the microcontroller require 115 kB and 213 kB at a maximum, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (96)

Show source-provided references
1. Understanding the limits of rapid charging using instrumented commercial 18650 high-energy li-ion cells10.1016/j.electacta.2018.01.076 ↗
2. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging10.1016/j.jpowsour.2018.11.043 ↗
3. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
4. Modeling of lithium plating and lithium stripping in lithium-ion batteries10.1016/j.jpowsour.2018.12.084 ↗
5. A sei modeling approach distinguishing between capacity and power fade10.1149/2.0321712jes ↗
6. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
7. Modeling and simulation of lithium-ion batteries from a systems engineering perspective10.1149/2.018203jes ↗
8. Review of simplified pseudo-two-dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
9. STMicroelectronics · 2018
10. Approximate solutions for galvanostatic discharge of spherical particles: 1. constant diffusion coefficient10.1149/1.1409397 ↗
11. Efficient macro-micro scale coupled modeling of batteries10.1149/1.2032427 ↗
12. Review of models for predicting the cycling performance of lithium ion batteries10.1016/j.jpowsour.2005.05.070 ↗
13. Toward real-time simulation of physics based lithium-ion battery models10.1149/1.2776128 ↗
14. Mathematical model reformulation for lithium-ion battery simulations: galvanostatic boundary conditions10.1149/1.3065083 ↗
15. Continuum representation for simulating discrete events of battery operation10.1149/1.3258044 ↗
16. State estimation of a reduced electrochemical model of a lithium-ion battery
17. Parameter estimation and capacity fade analysis of lithium-ion batteries using reformulated models10.1149/1.3609926 ↗
18. Simplification and order reduction of lithium-ion battery model based on porous-electrode theory10.1016/j.jpowsour.2011.09.034 ↗
19. Electrochemical model based observer design for a lithium-ion battery10.1109/TCST.2011.2178604 ↗
20. Control-oriented modeling of a lithium-ion battery for fast charging10.3182/20140824-6-ZA-1003.00829 ↗
21. Parameter estimation of an electrochemistry-based lithium-ion battery model10.1016/j.jpowsour.2015.04.154 ↗
22. Micro-macroscopic coupled modeling of batteries and fuel cells: model development10.1149/1.1838820 ↗
23. Micro-macroscopic coupled modeling of batteries and fuel cells10.1149/1.1838821 ↗
24. Thermal-electrochemical coupled modeling of a lithium-ion cell
25. An approximate solution for solid-phase diffusion in a spherical particle in physics-based li-ion cell models10.1016/j.jpowsour.2011.08.096 ↗
26. A linear time-invariant model for solid-phase diffusion in physics-based lithium ion cell models10.1016/j.jpowsour.2012.04.040 ↗
27. Model order reduction for solid-phase diffusion in physics-based lithium ion cell models10.1016/j.jpowsour.2012.07.007 ↗
28. Extension of physics-based single particle model for higher charge–discharge rates10.1016/j.jpowsour.2012.09.084 ↗
29. Reduction of model order based on proper orthogonal cecomposition for lithium-ion battery simulations10.1149/1.3049347 ↗
30. Efficient reformulation of solid-phase diffusion in physics-based lithium-ion battery models10.1149/1.3425622 ↗
31. Coordinate transformation, orthogonal collocation, model reformulation and simulation of electrochemical-thermal behavior of lithium-ion battery stacks10.1149/2.058112jes ↗
32. Optimal control and state estimation of lithium-ion batteries using reformulated models
33. Investigation of projection-based model-reduction techniques for solid-phase diffusion in li-ion batteries
34. Efficient simulation and reformulation of lithium-ion battery models for enabling electric transportation10.1149/2.018408jes ↗
35. Model-based sei layer growth and capacity fade analysis for ev and phev batteries and drive cycles10.1149/2.1161412jes ↗
36. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
37. Efficient conservative numerical schemes for 1d nonlinear spherical diffusion equations with applications in battery modeling10.1149/2.102309jes ↗
38. Efficient conservative reformulation schemes for lithium intercalation10.1149/2.0061506jes ↗
39. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
40. Doyle · 1995
41. Mathematical modeling of lithium batteries
42. Newman · 2014
43. Modeling lithium intercalation of a single spinel particle under potentiodynamic control10.1149/1.1393279 ↗
44. Parameter estimation of single particle model using comsol multiphysics and matlab optimization toolbox
45. Single-particle model for a lithium-ion cell: thermal behavior10.1149/1.3521314 ↗
46. State estimation of lithium-ion cells using a physicochemical model based extended kalman filter10.1016/j.apenergy.2018.04.011 ↗
47. Approximate solutions for galvanostatic discharge of spherical particles i. constant diffusion coefficient10.1149/1.1409397 ↗
48. Towards real-time (milliseconds) parameter estimation of lithium-ion batteries using reformulated physics-based models10.1016/j.jpowsour.2008.04.077 ↗
49. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended kalman filter10.1016/j.jpowsour.2015.07.019 ↗
50. The MathWorks
51. COMSOL Multiphysics · 2017
52. A general energy balance for battery systems10.1149/1.2113792 ↗
53. A comparative study and review of different kalman filters by applying an enhanced validation method10.1016/j.est.2016.10.004 ↗
54. Online state of charge and model parameter co-estimation based on a novel multi-timescale estimator for vanadium redox flow battery10.1016/j.apenergy.2016.03.103 ↗
55. Uncertainties in entropy due to temperature path dependent voltage hysteresis in li-ion cells10.1016/j.jpowsour.2018.05.052 ↗
56. The MathWorks
57. State-of-charge estimation based on microcontroller-implemented sigma-point kalman filter in a modular cell balancing system for lithium-ion battery packs
58. Li · 05082016
59. Jorge V Barreras, Federico Ferrari, David A Howey, Development of Diagnosis Algorithms for Li-Ion Batteries, Implementation in a Microcontroller and Testing in an Hardware-In-The-Loop Simulator, University of Oxforddoi:10.13140/RG.2.2.26819.09768.
60. (1960) - contributions to the theory of optimal control
61. A new approach to linear filtering and prediction problems10.1115/1.3662552 ↗
62. New results in linear filtering and prediction theory10.1115/1.3658902 ↗
63. The MathWorks
64. Simulation of temperature rise in li-ion cells at very high currents10.1016/j.jpowsour.2014.08.033 ↗
65. Simulation of li-ion cells by dualfoil model under constant-resistance load10.1149/05848.0071ecst ↗
66. The matlab ode suite10.1137/S1064827594276424 ↗
67. Solving index-1 daes in matlab and simulink10.1137/S003614459933425X ↗
68. The MathWorks
69. The MathWorks
70. Numerical differentiation formulas for stiff systems of ordinary differential equations
71. Amestoy · 2017
72. The MathWorks
73. ARM
74. STMicroelectronics · 2018
75. The MathWorks
76. The MathWorks
77. IEEE, Ieee Standard for Floating-point Arithmetic. doi:10.1109/IEEESTD.2008.4610935.10.1109/IEEESTD.2008.4610935 ↗
78. Neher · 2018
79. Numerical solution of coupled, ordinary differential equations10.1021/i160027a025 ↗
80. On the stability of gauss-Jordan elimination with pivoting10.1145/360569.360653 ↗
81. Curtis · 1979 · 1
82. Arens · 2010
83. A physics-based distributed-parameter equivalent circuit model for lithium-ion batteries10.1016/j.electacta.2018.12.167 ↗
84. Online model identification and state-of-charge estimate for lithium-ion battery with a recursive total least squares-based observer10.1109/TIE.2017.2736480 ↗
85. Z. Chu, X. Feng, L. Lu, J. Li, X. Han, M. Ouyang, Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model, Appl. Energy. doi:10.1016/j.apenergy.2017.03.111.10.1016/j.apenergy.2017.03.111 ↗
86. The artemis european driving cycles for measuring car pollutant emissions10.1016/j.scitotenv.2004.04.070 ↗
87. Valoen_transport properties of lipf6-based li-ion battery electrolytes10.1149/1.1872737 ↗
88. Carbon black vs. black carbon and other airborne materials containing elemental carbon: physical and chemical distinctions10.1016/j.envpol.2013.06.009 ↗
89. Optimization of acetylene black conductive additive and pvdf composition for high-power rechargeable lithium-ion cells10.1149/1.2792293 ↗
90. Theoretical limits of energy density in silicon-carbon composite anode based lithium ion batteries10.1038/srep27449 ↗
91. Oxygen release and its effect on the cycling stability of lini x mn y co z o 2 (nmc) cathode materials for li-ion batteries10.1149/2.0021707jes ↗
92. Comparison of the structural and electrochemical properties of layered li[nixcoymnz]o2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
93. Computer simulations of a lithium-ion polymer battery and implications for higher capacity next-generation battery designs10.1149/1.1569478 ↗
94. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
95. Calculation of different physical constants in heterogenous substances10.1002/andp.19354160705 ↗
96. S. Arrhenius, About the reaction rate during acid induced inversion of sucrose, Z. Phys. Chem. 4 (1). doi:10.1515/zpch-1889-0116.10.1515/zpch-1889-0116 ↗