journal article·2019-09

Modeling of separator failure in lithium-ion pouch cells under compression

Abhishek Sarkar, Pranav Shrotriya, Abhijit Chandra

Publisher page

Abstract

Abstract The failure of the separator membrane by rupture or thermal runaway is the prime cause of concern for the lithium battery system. In this work, we model the mechanical behavior and ionic conductance of the separator membrane under compression and its influence on the lithium cell thermal performance. The separator membrane is modeled as an open-cell foam to correlate the mechanical deformation under compressive loads and ionic conductivity. Predicted correlation between mechanical deformation and ionic conductivity is compared with experimental reports of membrane performance. Next, the validated model is used to simulate the thermal performance of lithium-ion pouch cells. Thermal response is predicted for a number of different pouch cell configurations with graphite (C) as anode; cathode chosen from lithium manganese oxide (LMO), lithium cobalt oxide (LCO) or lithium ferrous phosphate (LFP); and separator membrane chosen from monolayer polypropylene (PP), monolayer polyethylene (PE), trilayer, non-woven or ceramic-coated. The thermal response is used to predict the average cell temperature under an applied compressive load. Design maps that plot the maximum cell temperature over a range of applied load for different rates of charging and cooling conditions are prepared and used to identify the design conditions leading to separator meltdown and thermal runaway.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Flexible and stretchable energy storage: recent advances and future perspectives10.1002/adma.201603436 ↗
3. A review of advanced flexible lithium-ion batteries
4. Thermal model of cylindrical and prismatic lithium-ion cells10.1149/1.1377592 ↗
5. Gas evolution in operating lithium-ion batteries studied in situ by neutron imaging10.1038/srep15627 ↗
6. Flexible electrodes and electrolytes for energy storage10.1016/j.electacta.2015.04.067 ↗
7. A multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell10.1016/j.commatsci.2013.10.002 ↗
8. Mechanical behavior of a battery separator in electrolyte solutions10.1016/j.jpowsour.2011.06.026 ↗
9. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
10. Battery separators10.1021/cr020738u ↗
11. A model for the behavior of battery separators in compression at different strain/charge rates10.1149/2.0111411jes ↗
12. A ‘microscopic’ structural mechanics FE model of a lithium-ion pouch cell for quasi-static load cases10.4271/2013-01-1519 ↗
13. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions10.1016/j.jpowsour.2013.06.134 ↗
14. Review: characterization and modeling of the mechanical properties of lithium-ion batteries10.3390/en10111730 ↗
15. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells10.1016/j.jpowsour.2013.08.056 ↗
16. Modelling of cracks developed in lithium-ion cells under mechanical loading10.1039/C5RA17865G ↗
17. The role of mechanically induced separator creep in lithium-ion battery capacity fade10.1016/j.jpowsour.2011.05.023 ↗
18. Microbuckling instability in elastomeric cellular solids10.1007/BF00414256 ↗
19. The energetics of heterogeneous deformation in open-cell solid foams10.1098/rspa.2000.0707 ↗
20. High strain rate compressive behaviour of aluminium alloy foams10.1016/S0734-743X(99)00153-0 ↗
21. Constitutive modeling of polymeric foam material subjected to dynamic crash loading10.1016/S0734-743X(97)00087-0 ↗
22. Analysis of the high strain compression of open-cell foams10.1016/S0022-5096(97)00027-6 ↗
23. Compressive response of open-cell foams. Part I: morphology and elastic properties10.1016/j.ijsolstr.2004.07.023 ↗
24. A self-charging power unit by integration of a textile triboelectric nanogenerator and a flexible lithium-ion battery for wearable electronics10.1002/adma.201500311 ↗
25. Hierarchical three-dimensional ZnCo2O4nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries
26. Modeling vaporization, gas generation and venting in Li-ion battery cells with a dimethyl carbonate electrolyte10.1149/2.0631709jes ↗
27. A lumped model of venting during thermal runaway in a cylindrical Lithium Cobalt Oxide lithium-ion cell10.1016/j.jpowsour.2015.12.088 ↗
28. Gas-Evolution induced volume fraction changes and their effect on the performance degradation of Li-ion batteries10.1149/1.3458649 ↗
29. In situ analysis of gas generation in lithium-ion batteries with different carbonate-based electrolytes10.1021/acsami.5b08399 ↗
30. Permeability of open-cell foams under compressive strain10.1016/j.ijsolstr.2006.12.025 ↗
31. A general energy balance for battery systems10.1149/1.2113792 ↗
32. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
33. Parametric analysis of electrode materials on thermal performance of lithium-ion battery: a material selection approach10.1149/2.0061809jes ↗
34. MATLAB · 2017
35. Deformation and failure characteristics of four types of lithium-ion battery separators10.1016/j.jpowsour.2016.07.078 ↗
36. Ion transport restriction in mechanically strained separator membranes10.1016/j.jpowsour.2012.10.093 ↗
37. Battery separator characterization and evaluation procedures for NASA's advanced lithium-ion batteries
38. Yen · 2002