journal article·2019-03Open access

Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells

A.G. Sabato, A. Rost, J. Schilm, M. Kusnezoff, M. Salvo, A. Chrysanthou, F. Smeacetto

Abstract

Abstract A new alkali-containing diopside based glass-ceramic sealant for solid oxide cells was synthesized, characterized and tested. The composition was designed to match the coefficient of thermal expansion (CTE) of Crofer22APU interconnect. The sealant has a glass transition temperature of 600 °C, a crystallization peak temperature of 850 °C and a maximum shrinkage temperature of 700 °C, thus suggesting effective densification prior to crystallization. The CTE of the glass-ceramic is 11.5 10−6 K−1, a value which is compatible with the CTE for Crofer22APU stainless steel. Crofer22APU/glass-ceramic/Crofer22APU joined samples were tested in simulated real-life operating conditions at 800 °C in dual atmosphere under an applied voltage, monitoring the electrical resistivity. The effect of two different applied voltages (0.7 V and 1.3 V) was evaluated. A voltage of 1.3 V led to a rapid decrease in the electrical resistivity during the test; such a drop was due to the formation of Cr2O3 “bridges” that connected the two Crofer22APU plates separated by the sealant. There was no decrease in the resistivity when a voltage of 0.7 V was applied. Instead, resistivity value remained stable at around 105 Ω cm for the 100 h test duration. The degradation mechanisms, due to both the alkali content and the applied voltage, are investigated and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Application of solid oxide fuel cell technology for power generation - a review10.1016/j.rser.2012.11.031 ↗
2. Fuel cell technology for domestic built environment applications: state of-the-art review10.1016/j.rser.2014.10.080 ↗
3. Solid oxide fuel cell technology - features and applications10.1016/j.ssi.2004.07.042 ↗
4. An overview of fuel cell technology: fundamentals and applications10.1016/j.rser.2014.01.012 ↗
5. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
6. Singhal · 2003
7. Solid oxide fuel cells: technology status10.1111/j.1744-7402.2004.tb00149.x ↗
8. Nguyen · 2016
9. Current developments in reversible solid oxide fuel cells10.1016/j.rser.2016.03.005 ↗
10. A review on cell/stack designs for high performance solid oxide fuel cells10.1016/j.rser.2015.12.034 ↗
11. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
12. Glass-based seals for solid oxide fuel and electrolyzer cells - a review10.1016/j.mser.2009.12.002 ↗
13. Seal glass for solid oxide fuel cells10.1016/j.jpowsour.2010.06.003 ↗
14. Aluminosilicate-based sealants for SOFCs and other electrochemical applications - a brief review10.1016/j.jpowsour.2013.05.099 ↗
15. Characteristics of glass sealants for intermediate-temperature solid oxide fuel cell applications
16. Electrical stability of a novel sealing glass with (Mn,Co)-spinel coated Crofer22APU in a simulated SOFC dual environment10.1016/j.jpowsour.2010.03.052 ↗
17. Electrical behavior of aluminosilicate glass-ceramic sealants and their interaction with metallic solid oxide fuel cell interconnects10.1016/j.jpowsour.2009.08.007 ↗
18. Behaviour of various glass-ceramic sealants with ferritic steels under simulated SOFC stack conditions10.1016/j.jpowsour.2005.02.015 ↗
19. Diopside-Ba disilicate glass-ceramic sealants for SOFCs: enhanced adhesion and thermal stability by Sr for Ca substitution10.1016/j.ijhydene.2012.12.074 ↗
20. Novel glass-ceramic composition as sealant for SOFCs10.1111/jace.13219 ↗
21. Diopside - Mg orthosilicate and diopside - Ba disilicate glass-ceramics for sealing applications in SOFC: sintering and chemical interactions studies10.1016/j.ijhydene.2012.05.130 ↗
22. Glass-ceramic sealant for solid oxide fuel cells application: characterization and performance in dual atmosphere10.1016/j.jpowsour.2016.08.010 ↗
23. Fei · 1995 · 29
24. Varshneya · 2006
25. Performance and testing of glass-ceramic sealant used to join anode-supported-electrolyte to Crofer22APU in planar solid oxide fuel cells10.1016/j.jpowsour.2009.01.042 ↗
26. Influence of electrical load on the stability of glass sealings10.1149/1.3205685 ↗
27. Chemical stability of glass seal interfaces in intermediate temperature solid oxide fuel cells10.1361/10599490419298 ↗
28. Salvo · 2013
29. Glass composite seals for SOFC application10.1016/j.jeurceramsoc.2006.05.046 ↗
30. Chemical stability of ferritic alloy interconnect for SOFCs10.1149/1.2735919 ↗
31. New viscous sealing glasses for electrochemical cells
32. Effect of glass sealant materials on microstructure and performance of Sr-doped LaMnO3 cathodes10.1023/A:1010950722533 ↗
33. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: the effect of protective alumina coating on electrical stability in dual environment10.1016/j.ijhydene.2012.08.084 ↗
34. Compliant alkali silicate sealing glass for solid oxide fuel cell applications : thermal cycle stability and chemical compatibility10.1016/j.jpowsour.2010.11.020 ↗
35. Compliant alkali silicate sealing glass for solid oxide fuel cell applications : the effect of protective YSZ coating on electrical stability in dual environment10.1016/j.jpowsour.2011.11.017 ↗
36. Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs
37. Glass – ceramic seal to join Crofer 22 APU alloy to YSZ ceramic in planar SOFCs10.1016/j.jeurceramsoc.2007.05.006 ↗
38. Characterization and performance of glass – ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs10.1016/j.jeurceramsoc.2008.03.035 ↗
39. New glass and glass – ceramic sealants for planar solid oxide fuel cells10.1016/j.jeurceramsoc.2009.09.033 ↗
40. J.G. Larsen, P.H. Larsen, C. Bagger, High Temperature Sealing Material,United States Patent, US 6,828,263 B2,2004.
41. J.G. Larse, C. Olsen, M.D. Jensen, Solid Oxide Fuel Cell Stack Having a Glass Sealing Material, United States Patent, US 8,163,436 B2, 2012.
42. W. Surdoval, E. Lara-Curzio, J. Stevenson, J. Muth, B.L. Armstrong, A. Shyam, M.L. Trejo, Y. Wang, Y.S. Chou, T. Shultz, Engineered Glass Seal for Solid-Oxide Fuel Cells, United States Patent, US2015/0030963 A1, 2015.
43. Microstructural evolution in two alkali multicomponent silicate glasses as a result of long-term exposure to solid oxide fuel cell environments10.1007/s10853-013-7384-8 ↗
44. Interface stability between bare, Mn–Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant10.1016/j.ijhydene.2017.11.150 ↗
45. Degradation of sealing glasses under electrical load
46. Development and testing of sealing glasses for SOFCs based on CFY-interconnects
47. Performance of a glass-ceramic sealant in a SOFC short stack10.1016/j.ijhydene.2012.07.025 ↗
48. Holland · 2002
49. VDM-Metals · 2010
50. Interactions between SOFC interconnect coating materials and chromia10.1111/j.1551-2916.2011.04749.x ↗
51. Metallic interconnects for solid oxide fuel cell: effect of water vapour on oxidation resistance of differently coated alloys10.1016/j.jpowsour.2008.11.041 ↗
52. Chromium vaporization from high-temperature alloys10.1149/1.2434690 ↗
53. Theoretical and experimental investigation of the thermochemistry of CrO2(OH)2(g)10.1021/jp0647380 ↗
54. Potassium-assisted chromium transport in solid oxide fuel cells10.1149/1.2781117 ↗