The whole process, bubble dynamic analysis in two-phase transport of the passive miniature direct methanol fuel cells
Source abstract
Abstract
Abstract In this paper, the force controlling bubble formation is calculated in anode reaction region by establishing a two-phase dynamic model. The whole dynamic process of bubble generation, growth, merging and detachment in porous media and microchannels are analyzed in depth. The effects of methanol concentration and discharge current on the bubble in the pores of the diffusion layer are analyzed, and the cross-section effect and hydrophobic effect of the flow channel are simulated. Besides, through visual experiments, a further understanding of cell performance, anode bubble growth characteristics and the behavior of bubbles are established to verify the simulation. Simulation and experimental results both show that the size and number of anode CO2 bubbles are highly correlated with cell operating conditions. More and smaller bubbles are easily generated when the anode reaction is more intense.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Direct methanol fuel cell system reliability analysis10.1016/j.ijhydene.2017.03.144 ↗
2. Passive direct methanol fuel cells for portable electronic devices10.1016/j.apenergy.2010.11.012 ↗
3. Polarization distribution and theoretical fitting of direct methanol fuel cell10.1016/j.ijhydene.2016.05.116 ↗
4. Application of response surface methodology to optimize and investigate the effects of operating conditions on the performance of DMFC10.1016/j.energy.2010.11.034 ↗
5. Three-dimensional proton exchange membrane fuel cell model: comparison of double channel and open pore cellular foam flow plates10.1016/j.energy.2016.02.010 ↗
6. The effect of cell orientations and environmental conditions on the performance of a passive DMFC single cell10.1007/s11581-013-0889-y ↗
7. Overview on the developments of vapor-feed direct methanol fuel cells10.1016/j.ijhydene.2014.02.002 ↗
8. Advances in stationary and portable fuel cell applications10.1016/j.ijhydene.2016.02.057 ↗
9. μPIV measurements of two-phase flows of an operated direct methanol fuel cell10.1007/s00348-013-1513-7 ↗
10. Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell10.1016/j.energy.2010.02.044 ↗
11. Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels10.1016/j.energy.2011.10.023 ↗
12. Experimental studying of the effect of active area on the performance of passive direct methanol fuel cell10.1007/s11581-015-1479-y ↗
13. Effect of diffusion layer compression on passive DMFC performance10.1016/j.electacta.2014.10.080 ↗
14. Two-dimensional two-phase mass transport model for methanol and water crossover in air-breathing direct methanol fuel cells10.1016/j.jpowsour.2009.03.008 ↗
15. Conceptual design and statistical overview on the design of a passive DMFC single cell10.1016/j.ijhydene.2014.01.117 ↗
16. Developments in fuel cell technologies in the transport sector10.1016/j.ijhydene.2016.03.164 ↗
17. Pressure drop behavior in the anode flow field of liquid feed direct methanol fuel cells10.1016/j.jpowsour.2004.09.036 ↗
18. Magnetic coupled passive direct methanol fuel cell: promoted CO2 removal and enhanced catalyst utilization10.1016/j.fuel.2014.08.066 ↗
19. Effects of anode flow field design on CO2 bubble behavior in μDMFC10.3390/s90503314 ↗
20. Visualization study on the dynamics of CO2 bubbles in anode channels and performance of a DMFC10.1016/j.jpowsour.2007.06.257 ↗
21. The effect of wetting properties on bubble dynamics and fuel distribution in the flow field of direct methanol fuel cells10.1016/j.jpowsour.2011.05.070 ↗
22. Novel method for investigation of two-phase flow in liquid feed direct methanol fuel cells using an aqueous H2O2 solution10.1016/S0378-7753(03)00824-3 ↗
23. Enhance performance of micro direct methanol fuel cell by in situ CO2 removal using novel anode flow field with superhydrophobic degassing channels10.1016/j.jpowsour.2017.03.099 ↗
24. Effect of stainless steel meshes on the performance of passive micro direct methanol fuel cells10.1016/j.ijhydene.2016.05.059 ↗
25. Influence of wetting conditions on bubble formation at orifice in an inviscid liquid. Transformation of bubble shape and size10.1016/S0927-7757(02)00592-7 ↗
26. Experimental Study of bubble growth and departure at the tip of capillary tubes with various wettabilities in a stagnant liquid10.1007/s10948-010-0723-y ↗
27. Bubble formation on a submerged micronozzle10.1016/j.jcis.2009.08.005 ↗
28. Bubbly flow mapping in the anode channel of a direct methanol fuel cell via PIV investigation10.1016/j.apenergy.2016.01.042 ↗
29. A distributed gas breather for micro direct methanol fuel cell
30. Numerical simulations of two-phase flow in an anode gas channel of a proton exchange membrane fuel cell10.1016/j.energy.2015.01.071 ↗
31. Theoretical analysis of CO2 bubble formation in anode flow field of μDMFC10.4028/www.scientific.net/AMM.635-637.346 ↗
32. A two-dimensional model for CO2/fuel multiphase flow on the anode side of a DMFC10.1115/1.4005384 ↗
33. Bubble behaviors in direct methanol fuel cell anode with parallel design10.1016/j.ijhydene.2017.06.149 ↗
34. Modeling of coupled multiphase transport in direct methanol fuel cell diffusion layers10.1149/1.3603974 ↗
35. Microfluidic analysis of CO2 bubble dynamics using thermal lattice-Boltzmann method10.1007/s10404-007-0232-x ↗
36. Direct methanol fuel cell bubble transport simulations via thermal lattice Boltzmann and volume of fluid methods10.1016/j.jpowsour.2009.10.025 ↗