Ultrahigh sulfur loading in ZnS1- /rGO through in situ oxidation-refilling route for high-performance Li S batteries
Source abstract
Abstract
Abstract Sulfides are one of the most fascinating cathodic candidates for lithium-sulfur batteries (LSBs). However, low sulfur contents, dissolution of lithium polysulfides (LiPSs) into the electrolyte and slow conversion kinetics are key challenges for commercialization of sulfided-based LSBs. Herein, massive active sites are fabricated by creating sulfur vacancies on zinc sulfide (ZnS) dispersed on reduced graphene oxide (rGO) (ZnS1-x/rGO) and subsequent in situ oxidation-refilling loading strategy, which allows for 90 wt% sulfur contents. X-ray photoelectron spectroscopy (XPS), electrocatalytical experiments and density functional theory (DFT) confirm that sulfur vacancies act as efficient adsorption and catalytic conversion sites for LiPSs. The S ZnS1-x/rGO cathode exhibits 1168 mAh g−1 capacity and ∼100% Coulombic efficiency with a capacity decay rate of 0.02% per cycle only at 0.5C after 500 cycles, one of the best performance reported up to date. Remarkably, high performances are retained even at 4.5 mg cm−2 areal sulfur loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Metal sulfide hollow nanostructures for electrochemical energy storage10.1002/aenm.201501333 ↗
2. A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries10.1039/C5MH00246J ↗
3. Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries10.1073/pnas.1615837114 ↗
4. Transition metal dichalcogenide atomic layers for lithium polysulfides electrocatalysis10.1021/jacs.6b08681 ↗
5. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts10.1021/acs.nanolett.5b04166 ↗
6. Electrocatalysis of polysulfide conversion by sulfur-deficient MoS2 nanoflakes for lithium–sulfur batteries10.1039/C7EE01047H ↗
7. Elemental sulfur and molybdenum disulfide composites for Li-S batteries with long cycle life and high-rate capability10.1021/acsami.6b03200 ↗
8. Pyrite FeS2 as an efficient adsorbent of lithium polysulphide for improved lithium–sulphur batteries10.1039/C6TA01214K ↗
9. Catalytic effects in lithium-sulfur batteries: promoted sulfur transformation and reduced shuttle effect
10. Electrocatalytic polysulfide traps for controlling redox shuttle process of Li-S batteries10.1021/jacs.5b04472 ↗
11. A novel synergistic composite with multi-functional effects for high-performance Li–S batteries10.1039/C6EE00104A ↗
12. Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst10.1038/srep33154 ↗
13. Heterogeneous catalysis for lithium–sulfur batteries: enhanced rate performance by promoting polysulfide fragmentations10.1021/acsenergylett.6b00603 ↗
14. 3D hierarchical nitrogen-doped carbon nanoflower derived from chitosan for efficient electrocatalytic oxygen reduction and high performance lithium–sulfur batteries10.1039/C7TA04728B ↗
15. Electrocatalytic activity of lithium polysulfides adsorbed into porous TiO2 coated MWCNTs hybrid structure for lithium-sulfur batteries10.1038/srep40679 ↗
16. Phosphorene as a polysulfide immobilizer and catalyst in high-performance lithium-sulfur batteries
17. Understanding heterogeneous electrocatalysis of lithium polysulfide redox on Pt and WS2 Surfaces10.1021/acs.jpcc.7b01514 ↗
18. Facilitating the redox reaction of polysulfides by an electrocatalytic layer-modified separator for lithium-sulfur batteries10.1039/C7TA02245J ↗
19. Electrocatalysis on separator modified by molybdenum trioxide nanobelts for lithium–sulfur batteries10.1002/admi.201800243 ↗
20. Elastic sandwich-type rGO-VS2/S composites with high tap density: structural and chemical cooperativity enabling lithium-sulfur batteries with high energy density
21. Low cost metal carbide nanocrystals as binding and electrocatalytic sites for High performance Li-S batteries10.1021/acs.nanolett.7b04505 ↗
22. A highly efficient polysulfide mediator for lithium–sulfur batteries10.1038/ncomms6682 ↗
23. Oxygen-deficient titanium dioxide nanosheets as more effective polysulfide reservoirs for lithium-sulfur batteries10.1002/chem.201701580 ↗
24. Exfoliated 2D lepidocrocite titanium oxide nanosheets for high sulfur content cathodes with highly stable Li–S battery performance10.1021/acsenergylett.7b01202 ↗
25. A composite material of uniformly dispersed sulfur on reduced graphene oxide: aqueous one-pot synthesis, characterization and excellent performance as the cathode in rechargeable lithium-sulfur batteries10.1007/s12274-012-0257-7 ↗
26. Review on high-loading and high-energy lithium-sulfur batteries
27. Synthesis and characterization of ZnS with controlled amount of S vacancies for photocatalytic H2 production under visible light10.1038/srep08544 ↗
28. In situ kinetic study of zinc sulfide activation using a quartz crystal microbalance with dissipation (QCM-D)10.1016/j.jcis.2011.10.048 ↗
29. Strong sulfur binding with conducting Magneli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries10.1021/nl502331f ↗
30. Understanding the anchoring effect of two-dimensional layered materials for lithium-sulfur batteries10.1021/acs.nanolett.5b00367 ↗
31. From a historic review to horizons beyond: lithium–sulphur batteries run on the wheels10.1039/C4CC05109B ↗
32. Vanadium dioxide-graphene composite with ultrafast anchoring behavior of polysulfides for lithium-sulfur batteries10.1021/acsami.8b02920 ↗
33. Nanoparticle assembled mesoporous MoO2 microrods derived from metal organic framework and wrapped with graphene as the sulfur host for long-life lithium–sulfur batteries