Effects of interactions between binders and different-sized silicons on dispersion homogeneity of anodes and electrochemistry of lithium-silicon batteries
Source abstract
Abstract
Abstract This study compares the dispersion of submicron-silicon and nano-sized silicon powders and the electrochemistry of the prepared anodes using carboxymethyl cellulose or guar gum as the binder. Carboxymethyl cellulose is found to be a better binder than guar gum for the electrochemistry of the anodes when the electrode active powder is submicron-silicon because carboxymethyl cellulose helps the dispersion of submicron-silicon while guar gum gels submicron-silicon in the electrode slurry. In contrast, guar gum is a better binder than carboxymethyl cellulose for cell performance when the active anode material is nano-sized silicon, which is much more oxidized on its surface. Batteries prepared with nano-sized silicon present a capacity below 1500 mAh g−1 at a current of 420 mA g−1 and poor initial Coulombic efficiency below 85%. For anodes using submicron-silicon as the active material, the constructed cells exhibit a capacity above 2500 mAh g−1 and good initial Coulombic efficiency above 93%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Parasitic reactions in nanosized silicon anodes for lithium-ion batteries10.1021/acs.nanolett.6b04551 ↗
2. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
3. Nanostructured silicon anodes for high-performance lithium-ion batteries10.1002/adfm.201502959 ↗
4. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
5. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
6. Silicon nanowires used as the anode of a lithium-ion battery10.1063/1.4922564 ↗
7. Amorphous silicon anode for lithium-ion rechargeable batteries10.1016/S0378-7753(02)00707-3 ↗
8. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
9. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
10. Failure modes of silicon powder negative electrode in lithium secondary batteries10.1149/1.1792242 ↗
11. Nanoscale silicon as anode for Li-ion batteries: the fundamentals, promises, and challenges10.1016/j.nanoen.2015.08.025 ↗
12. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
13. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes10.1038/nnano.2014.6 ↗
14. Effect of buffer size around nanosilicon anode particles for lithium-ion batteries10.1021/jp2093669 ↗
15. Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
16. Effect of oxide layer thickness to nano–Si anode for Li-ion batteries10.1039/c3ra41006d ↗
17. Wet chemical surface functionalization of oxide-free silicon10.1016/j.progsurf.2012.10.003 ↗
18. Improved initial performance of Si nanoparticles by surface oxide reduction for lithium-ion battery application10.1149/1.3559765 ↗
19. The effects of native oxide surface layer on the electrochemical performance of Si nanoparticle-based electrodes10.1149/2.007112jes ↗
20. Recent advancement of SiOx based anodes for lithium-ion batteries10.1016/j.jpowsour.2017.07.073 ↗
21. Stable cycling of SiO2 nanotubes as high-performance anodes for lithium-ion batteries10.1038/srep04605 ↗
22. Quartz (SiO2): a new energy storage anode material for Li-ion batteries10.1039/c2ee00003b ↗
23. Room temperature oxidation kinetics of Si nanoparticles in air, determined by x-ray photoelectron spectroscopy10.1063/1.1835566 ↗
24. Oxide growth on etched silicon in air at room temperature10.1149/1.2134225 ↗
25. Natural karaya gum as an excellent binder for silicon-based anodes in high-performance lithium-ion batteries10.1039/C6TA09522D ↗
26. Low-cost and sustainable corn starch as a high-performance aqueous binder in silicon anodes via in situ cross-linking10.1016/j.jpowsour.2018.06.045 ↗
27. Carboxymethyl chitosan: a new water soluble binder for Si anode of Li-ion batteries10.1016/j.jpowsour.2013.08.073 ↗
28. A Major Constituent of Brown Algae for use in high-capacity Li-ion batteries10.1126/science.1209150 ↗
29. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
30. Water soluble binder, an electrochemical performance booster for electrode materials with high energy density10.1002/aenm.201701185 ↗
31. Sodium carboxymethyl cellulose10.1149/1.2398725 ↗
32. Dispersion homogeneity and electrochemical performance of Si anodes with the addition of various water-based binders10.1149/2.0991810jes ↗
33. A robust ion-conductive biopolymer as a binder for Si anodes of lithium-ion batteries10.1002/adfm.201500589 ↗
34. Guar gum: structural and electrochemical characterization of natural polymer based binder for silicon-carbon composite rechargeable Li-ion battery anodes10.1016/j.jpowsour.2015.07.102 ↗
35. Galactomannan binding agents for silicon anodes in Li-ion batteries10.1039/C5TA03126E ↗
36. Socrates · 2001
37. Infrared absorption spectrum of silicon dioxide10.1111/j.1151-2916.1965.tb14680.x ↗
38. Shaw · 1996
39. Gelatinization of guar gum and its effects on the dispersion and electrochemistry of lithium-sulfur batteries10.1149/2.0351810jes ↗
40. Starch retrogradation: a comprehensive review10.1111/1541-4337.12143 ↗
41. Kissa · 1999
42. Effects of interactions among BaTiO3, PVA, and B 2O3 on the rheology of aqueous BaTiO3 suspensions10.1111/j.1551-2916.2010.04023.x ↗
43. Investigation of the polyvinyl alcohol stabilization mechanism and adsorption properties on the surface of ternary mixed nanooxide AST 50 (Al2O3–SiO2–TiO2)10.1007/s11051-014-2831-2 ↗
44. EIS study on the formation of solid electrolyte interface in Li-ion battery10.1016/j.electacta.2005.02.137 ↗
45. Original implementation of Electrochemical Impedance Spectroscopy (EIS) in symmetric cells: evaluation of post-mortem protocols applied to characterize electrode materials for Li-ion batteries10.1016/j.jpowsour.2016.01.036 ↗