journal article·2018-08

The influence of sputter conditions on the properties of LiPON and its interfaces

Yaser Hamedi Jouybari, Frank Berkemeier, Andreas Schäfer, Guido Schmitz

Publisher page

Abstract

Abstract The solid-state electrolyte LiPON is synthesized using reactive magnetron sputtering. The correlation between plasma conditions and chemical composition of the layers is studied by X-ray photo electron spectroscopy, accompanied by electrochemical measurements of the ionic conductivity of the films. It is found that the plasma conditions in the vicinity of the substrate affect the lithium and nitrogen contents in a reciprocal manner. The target sputter-age and an additional bias potential to the substrate are identified as important parameters to optimize the performance of the layers. Based on this information, bilayer samples are prepared, consisting of LiPON and a cathode of LiFePO4. Chronopotentiometry at these bilayers reveals the importance of a low interface resistance, and moreover, it identifies an insufficient lithium content at the LiPON/LiFePO4 interface as a reason for high interface resistance. Nitrogen is also essential to increase the conductivity and hence, a lack of nitrogen at the interface is suggested to have the same consequence. It is shown how the interface resistance can be controlled by the preparation conditions to achieve an optimized performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Issue and challenges facing rechargeable thin film lithium batteries10.1016/j.materresbull.2007.08.031 ↗
2. New developments in solid electrolytes for thin-film lithium batteries
3. Electrical properties of amorphous lithium electrolyte thin films
4. Enhancing silicon performance via LiPON coating: a prospective anode for lithium ion batteries10.1016/j.electacta.2016.09.040 ↗
5. Solid-state lithium microbatteries10.1007/BF02390214 ↗
6. Influence of sputtering conditions on ionic conductivity of LiPON thin films10.1016/j.ssi.2005.10.021 ↗
7. Investigation of the local structure of LiPON thin films to better understand the role of nitrogen on their performance10.1016/j.ssi.2011.01.006 ↗
8. Reduction of charge transfer resistance at the lithium phosphorus oxynitride/lithium cobalt oxide interface by thermal treatment10.1016/j.jpowsour.2005.03.073 ↗
9. Investigation of interfacial resistance between LiCoO2 cathode and LiPON electrolyte in the thin film battery10.1016/j.jpowsour.2006.04.042 ↗
10. In situ STEM-EELS observation of nanoscale interfacial phenomena in all-solid-state batteries10.1021/acs.nanolett.6b01119 ↗
11. Wasa · 2004
12. Depla · 2008
13. Lithium diffusion in sputter-deposited lithium iron phosphate thin-films10.1016/j.jpowsour.2013.02.043 ↗
14. Lithium phosphorous oxynitride films synthesized by a plasma-assisted directed vapor deposition approach10.1116/1.2823491 ↗
15. Sputter deposited LiPON thin films from powder target as electrolyte for thin film battery applications10.1016/j.tsf.2011.01.087 ↗
16. XPS measurements and structural aspects of silicate and phosphate glasses10.1016/0022-3093(80)90007-1 ↗
17. Characterization of nitrogen containing phosphate glasses by X-ray photoelectron spectroscopy10.1016/0022-3093(88)90413-9 ↗
18. Particle size dependence of the ionic diffusivity10.1021/nl1023595 ↗
19. Atomic-scale investigation of defects, dopants, and lithium transport in the LiFePO4 olivine-type battery material10.1021/cm050999v ↗
20. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries
21. Electrophoretic deposition of lithium iron phosphate cathode for thin-film10.1016/j.jpowsour.2011.09.108 ↗
22. Hydrothermal synthesis of hierarchical LiFePO4 microspheres for lithium ion battery10.1016/j.jallcom.2012.11.041 ↗
23. Synthesis and characterization of high power LiFePO4/C nano-plate thin films10.1016/j.jpowsour.2012.04.022 ↗
24. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
25. Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries10.1016/0378-7753(93)80106-Y ↗
26. Ionic conductivities and structure of lithium phosphorus oxynitride glasses10.1016/0022-3093(94)00665-2 ↗
27. Synthesis, crystal structure, and ionic conductivity of a polycrystalline lithium phosphorus oxynitride with the γ-Li3PO4 structure10.1006/jssc.1995.1140 ↗
28. The influence of the nitrogen-ion flux on structure and ionic conductivity of vapor deposited lithium phosphorus oxynitride films10.1016/j.jpowsour.2010.08.115 ↗
29. X-ray photoelectron spectroscopy of sodium phosphate glasses10.1016/0022-3093(79)90012-7 ↗
30. Calculation of activation energy of ionic conductivity in silica glasses by classical methods10.1111/j.1151-2916.1954.tb13991.x ↗