Multi-modal porous microstructure for high temperature fuel cell application
Source abstract
Abstract
Abstract In this study, the effect of microstructure of porous nickel electrode on the performance of high temperature fuel cell is investigated and presented based on a molten carbonate fuel cell (MCFC) cathode. The cathode materials are fabricated from slurry consisting of nickel powder and polymeric binder/solvent mixture, using the tape casting method. The final pore structure is shaped through modifying the slurry composition - with or without the addition of porogen(s). The manufactured materials are extensively characterized by various techniques involving: micro-computed tomography (micro-XCT), scanning electron microscopy (SEM), mercury porosimetry, BET and Archimedes method. Tomographic images are also analyzed and quantified to reveal the evolution of pore space due to nickel in situ oxidation to NiO, and infiltration by the electrolyte. Single-cell performance tests are carried out under MCFC operation conditions to estimate the performance of the manufactured materials. It is found that the multi-modal microstructure of MCFC cathode results in a significant enhancement of the power density generated by the reference cell. To give greater insight into the understanding of the effect of microstructure on the properties of the cathode, a model based on 3D tomography image transformation is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Energy-related catalysis10.1093/nsr/nwv017 ↗
2. Catalysis: role and challenges for a sustainable energy10.1007/s11244-009-9245-x ↗
3. Performance characterization of a novel Fe-based sorbent for anaerobic gas desulfurization finalized to high temperature fuel cell applications10.1016/j.ijhydene.2016.09.070 ↗
4. Kinetic modelling of molten carbonate fuel cells: effects of cathode water and electrode materials10.1016/j.jpowsour.2016.08.123 ↗
5. Molten Carbonate Fuel Cell performance analysis varying cathode operating conditions for carbon capture applications10.1016/j.jpowsour.2017.02.081 ↗
6. Experimental investigation of SO2 poisoning in a molten carbonate fuel cell operating in CCS configuration10.1016/j.ijhydene.2016.05.147 ↗
7. Study on a novel pressurized MCFC hybrid system with CO2 capture10.1016/j.energy.2016.05.074 ↗
8. A novel Nickel-Aluminum alloy with Titanium for improved anode performance and properties in Molten Carbonate Fuel Cells10.1016/j.jpowsour.2017.03.112 ↗
9. Dealing with fuel contaminants in biogas-fed solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) plants: degradation of catalytic and electro-catalytic active surfaces and related gas purification methods10.1016/j.pecs.2017.04.002 ↗
10. Energy, exergy and sensitivity analyses of a hybrid combined cooling, heating and power (CCHP) plant with molten carbonate fuel cell (MCFC) and Stirling engine10.1016/j.jclepro.2017.01.157 ↗
11. A thermo-economic analysis of repowering of a 250 MW coal fired power plant through integration of Molten Carbonate Fuel Cell with carbon capture10.1016/j.ijggc.2016.04.021 ↗
12. Molten carbonates for advanced and sustainable energy applications: Part I. Revisiting molten carbonate properties from a sustainable viewpoint10.1016/j.ijhydene.2015.12.073 ↗
13. Modeling an alkaline electrolysis cell through reduced-order and loss-estimate approaches10.1016/j.jpowsour.2014.06.138 ↗
14. Simulation of a reversible SOFC with aspen plus10.1016/j.ijhydene.2017.01.189 ↗
15. Efficiency analysis of a hydrogen-fueled solid oxide fuel cell system with anode off-gas recirculation10.1016/j.jpowsour.2016.08.002 ↗
16. Prediction of La0.6Sr0.4Co0.2Fe0.8O3 cathode microstructures during sintering: kinetic Monte Carlo (KMC) simulations calibrated by artificial neural networks10.1016/j.jpowsour.2017.02.029 ↗
17. Tubular SOFC air electrode ohmic overpotential: parametric and exergy study10.1016/j.enconman.2016.04.098 ↗
18. Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data10.1016/j.icheatmasstransfer.2016.07.008 ↗
19. A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology10.1039/C6CS00403B ↗
20. Experimental comparison of MCFC performance using three different biogas types and methane10.1016/j.jpowsour.2005.01.069 ↗
21. Carbon capture: energy wasting technologies or the MCFCs challenge?10.1016/j.ijhydene.2010.10.028 ↗
22. Strategies and new developments in the field of molten carbonates and high-temperature fuel cells in the carbon cycle10.1016/j.ijhydene.2011.11.006 ↗
23. Applicability of molten carbonate fuel cells to various fuels10.1016/j.jpowsour.2006.06.058 ↗
24. Status report on high temperature fuel cells in Poland – recent advances and achievements10.1016/j.ijhydene.2016.12.087 ↗
25. Materials issues and recent developments in molten carbonate fuel cells10.1007/s10008-012-1771-y ↗
26. Molten carbonate fuel cells10.1016/j.cossms.2004.12.005 ↗
27. The stability of molten carbonate fuel cell electrodes: a review of recent improvements10.1016/j.apenergy.2011.07.009 ↗
28. Atomistic insight into the electrode reaction mechanism of cathode in molten carbonate fuel cell10.1039/C7TA02011B ↗
29. Improvement of MCFC cathode stability by additives10.1016/S0013-4686(02)00353-5 ↗
30. Study of NiO cathode modified by ZnO additive for MCFC10.1016/j.jpowsour.2003.10.008 ↗
31. Modification of Ni-based cathode material for molten carbonate fuel cells using Co3O410.1016/j.jpowsour.2010.08.086 ↗
32. Study of LiFeO2 coated NiO as cathodes for MCFC by electrochemical impedance spectroscopy10.1016/j.jpowsour.2004.05.015 ↗
33. Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide. III. Electrochemical behaviour in molten carbonate10.1016/j.jpowsour.2007.06.013 ↗
34. TiO2-coated Ni powder as a new cathode material for molten carbonate fuel cells10.1016/j.jpowsour.2005.03.236 ↗
35. Effect of gas-phase transport in molten carbonate fuel cell10.1016/S0022-0728(02)01304-9 ↗
36. Design of open-porous materials for high-temperature fuel cells
37. Engineering porous materials for fuel cell applications10.1098/rsta.2005.1684 ↗
38. Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes10.1016/j.jpowsour.2008.12.145 ↗
39. The triple phase boundary a mathematical model and experimental investigations for fuel cells10.1149/1.1851054 ↗
40. Fabrication of porous components for molten carbonate fuel cell10.1016/S0272-8842(02)00201-8 ↗
41. LiFeO2-LiCoO2-NiO materials for molten carbonate fuel cell cathodes. Part II. Fabrication and characterization of porous gas diffusion cathodes10.1016/j.ssi.2005.10.019 ↗
42. Influence of anode pore-size distribution and total electrolyte filling degree on molten carbonate fuel cell performance10.1149/1.2816213 ↗
43. Analysis by electrochemical impedance spectroscopy of new MCFC cathode materials
44. Performance analysis with various amounts of electrolyte in a molten carbonate fuel cell
45. Fuel cells
46. The influence of pore size variation on the pressure drop in open-cell foams10.1016/j.matdes.2015.08.079 ↗
47. Pressure drop in flow across ceramic foams—a numerical and experimental study10.1016/j.ces.2015.06.043 ↗
48. Incorporation of the pore size variation to modeling of the elastic behaviour of metallic open-cell foams10.1515/amm-2017-0039 ↗
49. Nature-inspired optimization of hierarchical porous media for catalytic and separation processes10.1039/C5NJ03406J ↗
50. Particle size distribution measurement from millimeters to nanometers and from rods to platelets10.1081/DIS-120015368 ↗
51. Analysis of the 3D microstructure of tape-cast open-porous materials via a combination of experiments and modeling10.1016/j.matdes.2017.07.058 ↗
52. Optimization of the microstructure of molten carbonate fuel cell anode10.4028/www.scientific.net/MSF.890.274 ↗
53. Stochastic 3D modeling of La0.6Sr0.4CoO3−δ cathodes based on structural segmentation of FIB–SEM images10.1016/j.commatsci.2012.08.030 ↗
54. Predicting effective conductivities based on geometric microstructure characteristics10.1002/aic.15160 ↗
55. Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based material10.1016/S0008-8846(00)00370-7 ↗
56. Ink-bottle effect in mercury intrusion porosimetry of cement-based materials10.1006/jcis.2001.7962 ↗
57. 3D microstructure effects in Ni-YSZ anodes: prediction of effective transport properties and optimization of redox stability10.3390/ma8095265 ↗
58. Sintering characteristics of a porous Ni/Ni3Al anode for molten carbonate fuel cells10.1016/S0378-7753(99)00306-7 ↗
59. Experimental research on short-term feeding of dust contaminated gas to a molten carbonate fuel cell cathode10.1016/j.jpowsour.2017.04.046 ↗