journal article·2017-11

Scalable fabrication of core-shell structured Li 4 Ti 5 O 12 /PPy particles embedded in N-doped graphene networks as advanced anode for lithium-ion batteries

Haidong Gu, Feng Chen, Chengbao Liu, Junchao Qian, Min Ni, Tingting Liu

Publisher page

Abstract

Abstract Spinel-type Li 4 Ti 5 O 12 has been proposed as an advanced anode for energy storage because of its safety and stability in recent years. However, the Li 4 Ti 5 O 12 anode reported so far exhibited poor rate performance and required further improvement. Herein, a highly conductive network with PPy polymer and N-doped graphene sheet is constructed with Li 4 Ti 5 O 12 embedded inside for the first time. In this design, the Li 4 Ti 5 O 12 particles are uniformly coated with conducting PPy layer and further connected by the N-doped graphene. This combined structure is favorable to facilitate the electron and Li + transmission, and thus enhance the battery performance. The as-fabricated composite delivers the initial capacities of 186.2 and 152.9 mAh g −1 at 0.1 and 10 C, respectively. The above results reveal that the conducting PPy polymer and N-doped graphene sheet co-modified Li 4 Ti 5 O 12 composite would be a potential anode for next-generation energy storage device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Self-supported Li4Ti5O12-C nanotube arrays as high-rate and long-life anode materials for flexible Li-ion batteries10.1021/nl5004174 ↗
2. Challenges facing lithium batteries and electrical double-layer capacitors10.1002/anie.201201429 ↗
3. Ge/C nanowires as high-capacity and long-life anode materials for Li-ion batteries10.1021/nn501945f ↗
4. Novel peapoded Li4Ti5O12 nanoparticles for high-rate and ultralong-life rechargeable lithium ion batteries at room and lower temperatures10.1039/C5NR08399K ↗
5. Enhanced cycling performance of the Li4Ti5O12 anode in an ethers electrolyte induced by a solid-electrolyte interphase film10.1039/C5RA06566F ↗
6. Graphene oxide/lithium titanate composite with binder-free as high capacity anode material for lithium-ion batteries10.1016/j.jpowsour.2014.09.154 ↗
7. Building flexible Li4Ti5O12/CNT lithium-ion battery anodes with superior rate performance and ultralong cycling stability10.1016/j.nanoen.2014.10.012 ↗
8. Synthesis of nanosheets-assembled lithium titanate hollow microspheres and their application to lithium ion battery anodes10.1016/j.electacta.2014.11.087 ↗
9. Hierarchical carbon-coated acanthosphere-like Li4Ti5O12 microspheres for high-power lithium-ion batteries10.1016/j.jpowsour.2016.02.084 ↗
10. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
11. Enhanced rate performance of nanosized Li4Ti5O12/graphene composites as anode material by a solid state-assembly method10.1016/j.electacta.2015.05.008 ↗
12. In-situ synthesis of nano-Li4Ti5O12/C composite as an anode material for Li-ion batteries10.1016/j.ssi.2015.02.016 ↗
13. Rapid charge-discharge property of Li4Ti5O12-TiO2 nanosheet and nanotube composites as anode material for power lithium-ion batteries10.1021/am5057568 ↗
14. Synthesis of nano-Li4Ti5O12 anode material for lithium ion batteries by a biphasic interfacial reaction route10.1016/j.ceramint.2016.03.231 ↗
15. Influence of lithium precursors and calcination atmospheres on graphene sheets-modified nano-Li4Ti5O12 anode material10.1016/j.jpowsour.2015.02.021 ↗
16. Sub-micrometric Li4-xNaxTi5O12 (0≤x≤0.2) spinel as anode material exhibiting high rate capability10.1016/j.jpowsour.2013.08.005 ↗
17. A nanoparticle Mg-doped Li4Ti5O12 for high rate lithium-ion batteries10.1016/j.electacta.2013.10.035 ↗
18. Preparation and electrochemical properties of Ca-doped Li4Ti5O12 as anode materials in lithium-ion battery10.1016/j.electacta.2013.03.006 ↗
19. Improving the high rate performance of Li4Ti5O12 through divalent zinc substitution10.1016/j.jpowsour.2012.04.080 ↗
20. Structural and electrochemical properties of Gd-doped Li4Ti5O12 as anode material with improved rate capability for lithium-ion batteries10.1016/j.jpowsour.2015.01.124 ↗
21. Electrochemical performance of V-doped spinel Li4Ti5O12/C composite anode in Li-half and Li4Ti5O12/LiFePO4-full cell10.1016/j.jpowsour.2014.01.130 ↗
22. Carbon-encapsulated F-doped Li4Ti5O12 as a high rate anode material for Li+ batteries10.1021/nn404311x ↗
23. Solvothermal synthesis of micro-/nanoscale Cu/Li4Ti5O12 composites for high rate Li-ion batteries10.1016/j.electacta.2014.01.063 ↗
24. Comparative study of carbon free and carbon containing Li4Ti5O12 electrodes10.1016/j.jpowsour.2014.12.111 ↗
25. Li4Ti5O12/Ketjen Black with open conductive frameworks for high-performance lithium-ion batteries10.1016/j.electacta.2016.03.128 ↗
26. Carbon-coated nano-sized Li4Ti5O12 nanoporous micro-sphere as anode material for high-rate lithium-ion batteries10.1039/c1ee01680f ↗
27. Porous CNT@Li4Ti5O12 coaxial nanocables as ultrahigh power and long life anode materials for lithium ion batteries10.1039/C5TA07964K ↗
28. Preparation of Li4Ti5O12 nanosheets/carbon nanotubes composites and application fo anode material for lithium-ion batteries10.1016/j.electacta.2016.04.053 ↗
29. Integrated intercalation-based and interfacial sodium storage in graphene-wrapped porous Li4Ti5O12 nanofibers composite aerogel10.1002/aenm.201600322 ↗
30. Design and synthesis of N-doped graphene sheets loaded with Li4Ti5O12 nanocrystals as advanced anode material for Li-ion batteries10.1016/j.ceramint.2016.07.112 ↗
31. Small amount of reduce graphene oxide modified Li4Ti5O12 nanoparticles for ultrafast high-power lithium ion battery10.1016/j.jpowsour.2014.12.075 ↗
32. Advanced mesoporous spinel Li4Ti5O12/rGO composites with increased surface lithium storage capability for high-power lithium-ion batteries10.1021/acsami.6b01644 ↗
33. A strategy for scalable synthesis of Li4Ti5O12/reduced graphene oxide toward high rate lithium-ion batteries10.1016/j.elecom.2013.12.016 ↗
34. Rapid synthesis of Li4Ti5O12/graphene composite with superior rate capability by a microwave-assisted hydrothermal method10.1016/j.nanoen.2014.06.009 ↗
35. In situ synthesis of high-loading Li4Ti5O12-graphene hybrid nanostructures for high rate lithium ion batteries10.1039/C0NR00639D ↗
36. In situ reduction and coating of SnS2 nanobelts for free-standing paper electrodes with superior Li-ion storage10.1039/C5TA00431D ↗
37. Conducting polyaniline-wrapped lithium vanadium phosphate nanocomposite as high-rate and cycling stability cathode for lithium-ion batteries10.1016/j.electacta.2014.09.040 ↗
38. A polyaniline-coated mechanochemically synthesized tin oxide/graphene nanocomposite for high-power and high-energy lithium-ion batteries10.1016/j.jpowsour.2015.05.009 ↗
39. Preparation and characterization of conducting polyaniline coated LiVPO4F nanocrystals with core-shell structure and its application in lithium-ion batteries10.1016/j.electacta.2015.09.141 ↗
40. Uniform hierarchical Fe3O4@polypyrrole nanocages for superior lithium ion battery anodes10.1002/aenm.201600256 ↗
41. Microwave-assisted synthesis of SnO2@polypyrrole nanotubes and their pyrolyzed composite as anode for lithium-ion batteries10.1021/acsami.6b03332 ↗
42. PEDOT encapsulated FeOF nanorod cathodes for high energy lithium-ion batteries10.1021/acs.nanolett.5b03601 ↗
43. PEDOT coated Li4Ti5O12 nanorods: soft chemistry approach synthesis and their lithium storage properties10.1016/j.electacta.2014.02.112 ↗
44. Li3V2(PO4)3/conducting polymer as a high power 4 V-class lithium battery electrode10.1002/aenm.201300205 ↗
45. Synthesis and electrochemical performance of LiV3O8/polythiophene composite as cahode materials for lithium ion batteries10.1016/j.jpowsour.2013.08.078 ↗
46. Fe3O4/PPy composite nanospheres as anode for lithium-ion batteries with superior cycling performance10.1016/j.electacta.2013.12.105 ↗
47. An iron-based green approach to 1-h production of single-layer graphene oxide10.1038/ncomms6716 ↗
48. Core-shell structured hollow SnO2-polypyrrole nanocomposite anodes with enhanced cyclic performance for lithium-ion batteries10.1016/j.nanoen.2014.03.010 ↗
49. Synthesis by the sol-gel method and electrochemical properties of Li4Ti5O12 anode material for lithium-ion battery10.1016/j.ssi.2005.02.010 ↗
50. Fe3O4/polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterication, and their electrochemical properties10.1021/la8028935 ↗
51. Surfactant-free synthesis of Fe3O4@PANI and Fe3O4@PPy microspheres as adsorbents for isolation of PCR-ready DNA10.1039/C2DT32164E ↗
52. W6+ and Br- codoped Li4Ti5O12 anode with super rate performance for Li-ion batteries10.1039/C5TA02784E ↗
53. High rate cycling performance of nanosized Li4Ti5O12/graphene composites for lithium ion batteries10.1016/j.electacta.2016.01.180 ↗
54. Solid-state synthesis and electrochemical performance of Li4Ti5O12/graphene composite for lithium-ion batteries10.1016/j.electacta.2013.07.058 ↗
55. Sb doped Li4Ti5O12 hollow spheres with enhanced lithium storage capability10.1039/C6RA01831A ↗
56. Li4Ti5O12 nanosheets as high-rate and long-life anode materials for sodium-ion batteries10.1039/C5TA07403G ↗
57. Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries10.1016/j.electacta.2010.02.025 ↗
58. A facial solvothermal reduction route for the production of Li4Ti5O12/graphene composites with enhanced electrochemical performance10.1016/j.ceramint.2015.08.115 ↗