journal article·2016-09

The effect of number and configuration of sediment microbial fuel cells on their performance in an open channel architecture

Elham Abazarian, Reza Gheshlaghi, Mahmood A. Mahdavi

Publisher page

Abstract

Abstract The aim of this study is to investigate the effect of the number of sediment microbial fuel cells (SMFCs) with different configurations on the electricity generation in open channels. For this purpose, two open channels, one with three and another with four SMFCs, were operated over a long period of time and their performances were analyzed. Individual SMFCs followed an almost similar trend for electricity generation during the operation time. In addition, it was found that three-SMFC stacking in series mode produced a relatively higher maximum power density (18 mW m −2 ) than four-SMFC stacking (16 mW m −2 ). However, in parallel mode, four-SMFC stacking had a higher maximum power density of 90 mW m −2 compared to three-SMFC stacking with maximum power density of 78 mW m −2 . These findings indicate that different numbers of cells significantly affect electricity generation depending on the type of SMFC configuration in the channel. The results would be helpful for application of SMFCs in large-scale.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Mass transfer limitation in different anode electrode surface areas on the performance of dual chamber microbial fuel cell10.3844/ajbbsp.2012.320.325 ↗
2. Production of algal biomass (Chlorella vulgaris) using sediment microbial fuel cells10.1016/j.biortech.2011.06.039 ↗
3. Electricity generation from Taihu Lake cyanobacteria by sediment microbial fuel cells10.1002/jctb.3794 ↗
4. Increased power production from a sediment microbial fuel cell with a rotating cathode10.1016/j.bios.2007.01.010 ↗
5. Determination of effects of turbulence flow in a cathode environment on electricity generation using a tidal mud-based cylindrical-type sediment microbial fuel cell
6. Experimental evaluation of influential factors for electricity harvesting from sediment using microbial fuel cell10.1016/j.biortech.2009.01.030 ↗
7. Effect of presence of cellulose in the freshwater sediment on the performance of sediment microbial fuel cell10.1016/j.biortech.2013.12.094 ↗
8. To improve the performance of sediment microbial fuel cell through amending colloidal iron oxyhydroxide into freshwater sediments10.1016/j.biortech.2014.02.082 ↗
9. Effects of sediment pretreatment on the performance of sediment microbial fuel cells10.1016/j.biortech.2011.08.129 ↗
10. Scale-up of sediment microbial fuel cells10.1016/j.jpowsour.2014.08.070 ↗
11. Electricity generation from sediment microbial fuel cells with algae-assisted cathodes10.1016/j.ijhydene.2014.06.141 ↗
12. Comparison in performance of sediment microbial fuel cells according to depth of embedded anode10.1016/j.biortech.2012.09.095 ↗
13. Effect of operating parameters on the performance of sediment microbial fuel cell treating aquaculture water10.1016/j.aquaeng.2014.05.004 ↗
14. Powering a wireless temperature sensor using sediment microbial fuel cells with vertical arrangement of electrodes10.1016/j.jpowsour.2011.07.037 ↗
15. Effects of the presence of sheet iron in freshwater sediment on the performance of a sediment microbial fuel cell10.1016/j.ijhydene.2015.09.045 ↗
16. Voltage reversal during microbial fuel cell stack operation10.1016/j.jpowsour.2007.02.016 ↗
17. Self-stacked submersible microbial fuel cell (SSMFC) for improved remote power generation from lake sediments10.1016/j.bios.2012.02.059 ↗
18. Long-term evaluation of a 10-liter serpentine-type microbial fuel cell stack treating brewery wastewater10.1016/j.biortech.2012.07.038 ↗
19. Investigating a cascade of seven hydraulically connected microbial fuel cells10.1016/j.biortech.2012.01.095 ↗
20. Control of voltage reversal in serially stacked microbial fuel cells through manipulating current: significance of critical current density10.1016/j.jpowsour.2015.02.076 ↗
21. A single sediment-microbial fuel cell powering a wireless telecommunication system10.1016/j.jpowsour.2013.05.016 ↗
22. Chemometrical assessment of the electrical parameters obtained by long-term operating freshwater sediment microbial fuel cells10.1016/j.bioelechem.2015.05.017 ↗
23. Power management system for a 2.5 W remote sensor powered by a sediment microbial fuel cell10.1016/j.jpowsour.2010.08.099 ↗
24. Distributed multiple-anodes benthic microbial fuel cell as reliable power source for subsea sensors10.1016/j.jpowsour.2015.03.161 ↗
25. Logan · 2008
26. Responses from freshwater sediment during electricity generation using microbial fuel cells10.1007/s00449-008-0258-9 ↗
27. Microbial communities associated with electrodes harvesting electricity from a variety of aquatic sediments10.1007/s00248-003-0004-4 ↗
28. Wang · 2006
29. Continuous electricity generation at high voltages and currents using stacked microbial fuel cells10.1021/es0525511 ↗
30. Continuous electricity generation in stacked air cathode microbial fuel cell treating domestic wastewater
31. Shift of voltage reversal in stacked microbial fuel cells10.1016/j.jpowsour.2014.12.112 ↗
32. MFC-cascade stacks maximise COD reduction and avoid voltage reversal under adverse conditions10.1016/j.biortech.2013.01.119 ↗
33. Substrate cross-conduction effect on the performance of serially connected microbial fuel cell stack10.1016/j.elecom.2009.02.027 ↗
34. Monolithically integrated planar microfuel cell arrays10.1016/j.snb.2007.11.026 ↗
35. Parasitic currents caused by different ionic and electronic conductivities in fuel cell anodes10.1021/acsami.5b02182 ↗