Development and experimental validation of a dynamic thermal and water distribution model of an open cathode proton exchange membrane fuel cell
Source abstract
Abstract
Water concentration in proton exchange membrane (PEM) fuel cells strongly influences performance and durability which demands for fundamental understanding of water transport mechanisms. The system efficiency can be significantly improved with greater understanding of water flux dynamics through the membrane and its dependence on the internal conditions of the fuel cell. Therefore, a two-dimensional, non-isothermal, dynamic model of a 100 W open cathode, self-humidified PEM fuel cell system has been developed, that is capable of representing system specific control mechanisms for water and thermal management. The model consists of three coupled submodels based on energy, momentum and water mass balance of the system. The work is based on experimental observations of the investigated fuel cell stack, for which the crucial coefficients for water transport, namely the diffusion and the electroosmotic drag (EOD) coefficient have been determined. The diffusivity of water vapor through the MEA at 30 °C was determined to be 3.3 × 10-8 m2 s-1 and increases by 3 × 10-10 m2 s-1 °C-1 up to 50 °C stack temperature. The EOD coefficient was measured as 0.47–0.48 water molecules per proton at stack currents from 1 to 3 A. Validation of the steady state and the dynamic model by using experimental data, directly obtained from laboratory tests, has shown that the model predictions match the experimental data well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Springer · Journal of the Electrochemical Society · 1991 · 138 · 233410.1149/1.2085971 ↗
2. Hussaini · Journal of Power Sources · 2010 · 195 · 382210.1016/j.jpowsour.2009.12.112 ↗
3. Dai · International Journal of Hydrogen Energy · 2009 · 34 · 946110.1016/j.ijhydene.2009.09.017 ↗
4. Barbir · 2005
5. Gurau · AIChE Journal · 1998 · 44 · 241010.1002/aic.690441109 ↗
6. Ju · International Journal of Heat and Mass Transfer · 2005 · 48 · 130310.1016/j.ijheatmasstransfer.2004.10.004 ↗
7. Wang · Journal of the Electrochemical Society · 2006 · 153 · A119310.1149/1.2193403 ↗
8. Basu · Journal of the Electrochemical Society · 2009 · 156 · B74810.1149/1.3115470 ↗
9. Basu · Journal of Power Sources · 2009 · 187 · 43110.1016/j.jpowsour.2008.11.039 ↗
10. Two-dimensional PEM fuel cells modeling using comsol multiphysics
11. Husar · Journal of Power Sources · 2008 · 183 · 24010.1016/j.jpowsour.2008.04.042 ↗
12. Müller · 2005
13. COMSOL, COMSOL Multiphysics Version 3.5 Documentation, Chemical Engineering Module, 2008.
14. Shi · Journal of Power Sources · 2006 · 160 · 27710.1016/j.jpowsour.2006.01.032 ↗
15. Shi · 2007
16. Meng · Journal of the Electrochemical Society · 2005 · 152 · 173310.1149/1.1955007 ↗
17. McKay · 2004
18. He · Journal of Power Sources · 2010 · 195 · 155110.1016/j.jpowsour.2009.09.059 ↗