Electrochemical performance of solid oxide fuel cells having electrolytes made by suspension and solution precursor plasma spraying
Source abstract
Abstract
Abstract Yttria-stabilized zirconia (YSZ) electrolytes were deposited by suspension plasma spraying (SPS) and solution precursor plasma spraying (SPPS). The electrolytes were evaluated for permeability, microstructure, and electrochemical performance. With SPS, three different suspensions were tested to explore the influence of powder size distribution and liquid properties. Electrolytes made from suspensions of a powder with d 50 = 2.6 μm were more gas-tight than those made from suspensions of a powder with d 50 = 0.6 μm. A peak open circuit voltage of 1.00 V was measured at 750 °C with a cell with an electrolyte made from a suspension of d 50 = 2.6 μm powder. The use of a flammable suspension liquid was beneficial for improving electrolyte conductivity when using lower energy plasmas, but the choice of liquid was less important when using higher energy plasmas. With SPPS, peak electrolyte conductivities were comparable to the peak conductivities of the SPS electrolytes. However, leak rates through the SPPS electrolytes were higher than those through the electrolytes made from suspensions of d 50 = 2.6 μm powder. The electrochemical test data on SPPS electrolytes are the first reported in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Blennow · J. Power Sources · 2011 · 196 · 711710.1016/j.jpowsour.2010.08.088 ↗
2. Szabo · ECS Trans. · 2009 · 25 · 17510.1149/1.3205523 ↗
3. Vaßen · Surf. Coat. Technol. · 2007 · 202 · 49910.1016/j.surfcoat.2007.06.064 ↗
4. Wang · J. Therm. Spray Technol. · 2012 · 21 · 710.1007/s11666-011-9696-z ↗
5. Waldbillig · J. Power Sources · 2011 · 196 · 542310.1016/j.jpowsour.2011.02.057 ↗
6. Pawlowski · Surf. Coat. Technol. · 2009 · 203 · 280710.1016/j.surfcoat.2009.03.005 ↗
7. Xiong · J. Therm. Spray Technol. · 2009 · 18 · 88710.1007/s11666-009-9349-7 ↗
8. J. Oberste Berghaus, S. Bouaricha, J.-G. Legoux, C. Moreau, in: E. Lugscheider (Ed.), Proceedings of the 2005 International Thermal Spray Conference, Basel, Switzerland, pp. 512–518.
9. Soysal · Surf. Coat. Technol. · 2013 · 220 · 18710.1016/j.surfcoat.2012.12.009 ↗
10. Marr · Surf. Coat. Technol. · 2013 · 216 · 28910.1016/j.surfcoat.2012.11.060 ↗
11. Rampon · Surf. Coat. Technol. · 2008 · 202 · 433710.1016/j.surfcoat.2008.04.006 ↗
12. Jia · J. Therm. Spray Technol. · 2010 · 19 · 56610.1007/s11666-009-9423-1 ↗
13. VanEvery · Int. J. Appl. Ceram. Technol. · 2011 · 8 · 138210.1111/j.1744-7402.2010.02593.x ↗
14. Irvine · Faraday Discuss. · 2007 · 134 · 4110.1039/B604441G ↗
15. Zhang · Solid State Ionics · 2009 · 180 · 131110.1016/j.ssi.2009.08.004 ↗
16. Muoto · J. Therm. Spray Technol. · 2011 · 20 · 80210.1007/s11666-011-9636-y ↗
17. Chen · Surf. Coat. Technol. · 2008 · 202 · 213210.1016/j.surfcoat.2007.08.077 ↗
18. Metcalfe · J. Power Sources · 2013
19. Metcalfe · J. Therm. Spray Technol. · 2013 · 22 · 59910.1007/s11666-013-9884-0 ↗
20. Marr · J. Therm. Spray Technol. · 2012 · 21 · 133410.1007/s11666-012-9829-z ↗
21. Harris · J. Power Sources · 2013 · 239 · 23410.1016/j.jpowsour.2013.03.040 ↗
22. Zhang · Mater. Sci. Eng. B · 2007 · 137 · 2410.1016/j.mseb.2006.10.005 ↗
23. Barfod · J. Electrochem. Soc. · 2007 · 154 · B37110.1149/1.2433311 ↗
24. Xie · Surf. Coat. Technol. · 2006 · 201 · 105810.1016/j.surfcoat.2006.01.020 ↗
25. VanEvery · J. Therm. Spray Technol. · 2011 · 20 · 81710.1007/s11666-011-9632-2 ↗
26. Fergus · J. Power Sources · 2006 · 162 · 3010.1016/j.jpowsour.2006.06.062 ↗